B/A Products

This V-Chain has two 3' legs with a 15" j-hook and t-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.

This 24" Hydraulic Hose Cutter will easily cut through steel braided hydraulic lines, making clean and precise cuts when it does.

This replacement long Spring Lock is made from durable Steel and is made to be welded directly onto your carrier if desired.

These Twist Lock Shackles have a quick locking and unlocking action which means less time in the "danger zone". The pin will fully retract without coming loose because it is permanently attached to the shackle.

These MatJack high pressure air bags are steel reinforced. These air bags come with 3 different lift capacities. These lift bag are sold as each, they are available in a 13 ton lift capacity, a 22 ton lift capacity, or a 32 lift capacity. All 3 of these air bags have a 120 P.S.I. working pressure. These bags are great on a recovery scene where you don't have enough clearance to use a standard jack.

This left side Quick Release Pawl is for use on car trailers.

1" wide Dolly Strap that comes with a Ratchet and a Sewn Eye Loop at the end of each strap. The loose end of this tie-down passes through the fixed end, then use the Ratchet to choke the tire.

Cargo Tie Down with Chains and Grab Hooks.

Use this Inflatable Wedge with all of your unlocking tools. Just wedge it between the door and window and pump it up. It will separate the two, giving you enough room to work.

This Low Profile V-Chain has two 2' legs with an 8" j-hook and t-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

These Grade 100 Chain Assemblies come with a Twist Lock Grab Hook attached to each end of each chain. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. Grade 100 chain is made from alloy steel and is extremely strong, 25% higher work load limit than grade 80, making it ideal for recovery or lifting. Please Note: Product Discontinued - ALL SALES FINAL! Discontinued items are not eligible for return.

This Grade 80 Chain is 3/8" x 10' with a 15" J-Hook on one end and a Master Link with a Grab Hook attached on the other end.

Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift. This 2" strap is 8 feet long and comes with a double j-hook attached at one end.

This replacement short Spring Lock Pin comes with a ring connected to it. Use this pin with the short spring lock (BA-SL).

Available in Classic or Tower's Edge webbing These Low Profile V-Straps have an 8" j-hook attached to the end of each. Use the new Low Profile V-Straps from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.

This Basket Style Strap is used to hold the tire in place, just put the strap over the tire and secure it for a tight fit. Strap comes with a flat hook and ratchet attached to each strap.

This replacement short Spring Lock is made from durable Steel and is made to be welded directly onto your carrier if desired.

This right side Quick Release Pawl is for use on car trailers.

This Low Profile V-Chain has two 2' legs with an 8" j-hook and mini j attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

Available in Classic, Tower's Edge and Heavy Duty webbing these Soft Tie-Down Kits with Axle Straps are built to work in many different scenarios. They are perfect for using thru expensive wheels or around a painted axle. Each axle strap comes with a Cordura sleeve which is great for protecting not only the axle but also those expensive wheels and axles. 8' snap hook straps and ratchets with chains secure the load to your carrier or trailer.

This replacement long Spring Lock Pin comes with a ring connected to it. Use this pin with the long spring lock (BA-SL-L).

Soft Tie-Down Kits with Axle Straps are built to work in many different scenarios. They are perfect for using thru expensive wheels or around a painted axle. Each axle strap comes with a Cordura sleeve which is great for protecting not only the axle but also those expensive wheels and axles. 8' snap hook straps and ratchets with snap hooks secure the load to your carrier or trailer. Order now and receive a free carrying bag.

These Grade 100 chain assemblies include a Twist Lock Non-Cradle Grab Hook at each end for length adjustability. Grade 100 has excellent wear and abrasion resistance. These Chain Assemblies are come in Hi-Vis Yellow to help keep your recovery scene safe.

This heavy duty replacement Ring is for a Spring Lock.

The highly durable 12" Steel Triangle is an excellent addition to nearly any type of vehicle recovery job. Offering optimal reliability for where you need it the most, this durable piece of yellow zinc steel is more than capable of providing you with exactly the kind of strength you need to get the job done right. It can easily handle a working load limit of 32,000 lbs., making it a great tool to have around for the vehicle towing job.