B/A Products

These Master Link Assemblies come with one large link and two smaller links connected to it. Use these links to attach to a hook to a chain, or create your own chain sling. Grade 100 links have a 25% higher work load than standard grade 80 links.

This Low Profile V-Chain has two 3' legs with an 8" j-hook and mini j attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

B/A Products replacement SMH gray connector for jump starter Part#: 41-7/30

This Grade 70 Chain is 5/16" x 10' and includes a 15" j-hook at one end and a grab hook and hammerhead t-j combo hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.

B/A Products 2" x 30' Tie-Down Assembly w/ Flat Hook.

Yoke Web Sling Connectors increase synthetic sling efficiency and allow for better

These are replacement B/A Flipper Plates. They come in 3 hole (8.75") or 5 hole (13.75").

Engages electric motor for operating the hydraulics. Solenoid engages electric vented (BAM24) and enclosed (BAM44) motors to operate hydraulics on auto transport trailers.

This 4" tie-down is 36' long and comes with a ratchet and flat hook attached at each end of the strap. Use Cargo Tie-Down Straps to secure your equipment and cargo in truck beds, trailers, and carriers. Easy to use ratcheting makes tightening and securing your load fast and easy.

These brushes are to be used with the Slide Rite Graphite Lube.

Use V-Straps to prevent damage to the underside of the bumper or spoiler. This 3" V-Strap has two 24" legs connected by a link with a 15" j-hook and hammerhead t-j combo hook attached to the end of the each leg. All V-Straps are made with reinforced Cordura eyes for maximum resistance to tears, cuts and abrasions.

Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift. This 2" strap is 8 feet long and comes with a flat snap hook and a large d-ring attached at one end. It is also covered with a Cordura sleeve for added protection. Strap is commonly used on Eagle Tow Trucks.

Contain leaks quickly and efficiently with a deluxe universal spill kit from B/A Products. The kit includes absorbent pads and granules to soak up unwanted liquids, and absorbent socks create dams to prevent the overflow from migrating past the immediate spill scene. PPE and bags also included in this convenient take-along package.

This water-based acrylic no-skid coating will help reduce the risk of slipping or falling in any potentially slippery area.

48" replacement adsorbent socks for B/A Standard & Deluxe Spill Kit (11-SPILL2 & 11-SPILL)

This Grade 70 Chain is 5/16" x 8' and includes a 15" j-hook at one end and a grab hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.

This Grade 70 Chain is 5/16" x 10' and includes a 15" j-hook at one end and a grab hook, t-hook, t-hook and mini j-hook on the other end. The forged, heat treated steel has excellent wear and abrasion resistance.

This chain assembly comes equipped with a Twist Lock Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization, but this style of hook is not for overhead lifting. B/A's patented Twist Lock design is easy to install and easy to use. It has the most secure latch on the market which prevents accidental release of the chain from the hook connection and inadvertent re-hooking. These hooks can be used in place of slip hooks.

Available in the following sizes






 
   
   
 


 
   
   
 
 
   
   
 
 
   
   
 
 
   
   
 

Item #	Length
BA-GRC120	10'
BA-GRC144	12'
BA-GRC168	14'
BA-GRC180	15'

 

This Low Profile V-Chain has two 3' legs with an 8" j-hook and hammerhead t-j combo hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

Handheld push-button control. 120 psi relief valve. Control inflation and deflation of high pressure air bags. Features a 120 psi/8 bar relief valve. Includes 0-160 psi/10 bar gauge.

These zinc plated 5/8" X 8' chain assemblies include a grab hook at each end for length adjustability.

Quickly secure and ship rail, truck and trailer loads. Spring-loaded ratchet buckles tension and release loads.

This is a Replacement Strap with a Ratchet and Flat Hook for the Side Rail Tie-Down Strap 38-65A.

Taking on the many different challenges of the industry can be a lot easier once you get your hands on the highly reliable 2" x 14' Grab Hook Chain Strap from B/A Products Co. This strong tie-down strap is equipped with solid hardware that increases its performance, providing you with a reliable means of securing and stabilizing your heavy-duty load. It can easily handle the rougher jobs with greater ease, offering you the dependable strength to maintain a secure grip on the cargo or the vehicle. Able to handle a working load limit of 4,000 lbs., the strap is made from our high-quality B/A Polyester Classic Webbing that can withstand the daily challenge of the industry.