B/A Products

Grade 70 Chain is produced from heat treated carbon steel. It is the standard for towing, logging and tie-down applications. It is Yellow Zinc plated, which provides easy identification. Chain meets DOT specifications. This chain is not approved for overhead lifting.

Grade 70 drop forged steel4,700-lb. WLL Use with Grade 40 or Grade 70 5/16" chain. Not for recovery.

Corner protectors are a must for all straps that contact loads. A seemingly dull edge can become a knife when the strap is put in tension. This part can be used to replace Part Numbers: 270412, 270SLEEVE, 38-CP4.

This is a B/A 2" Rubber Handle Gradual Release Ratchet with finger hook. This is an easy to use ratchet with a comfort rubber grip handle. This ratchet makes unstrapping a load quick, easy, and safe. It has a step-by-step controlled gradual release action that reduces the risk of accidents. It also creates less wear and tear on the ratchet. Stamped into each handle on the ratchet is a Working Load Limit for easy identification.

This Low Profile V-Chain has two 2' legs with a 15" j-hook and a hammerhead t-j combo hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

These Synthetic Rope Winch Lines come with a Self-Locking Hook that will not open when under load. Constructed of Atlantic Braids SupreemX-12 synthetic with Dyneema. Please Note: Product Discontinued - ALL SALES FINAL!

These lock pins are a quick and easy way to set your deck height. Available in both left- and right-angled pins. Can be used almost anywhere on your trailer.

This 15" Forged Clevis J-Hook can be added to any chain to give you an extra hook up option.

This Basket Style Strap is used to hold the tire in place, just put the strap over the tire and secure it for a tight fit. Strap comes with a j-hook attached at one end. This basket strap is commonly used on older Jerr-Dan Tow Trucks.

This three hook cluster includes a grab hook, t-hook & mini j-hook mounted onto an oblong link. This cluster is great for giving you added reach when you need it. A great assortment of hooks for any situation that gives you multiple hook up options.

This Basket Style Strap is used to hold the tire in place, just put the strap over the tire and secure it for a tight fit. Large strap comes with a three cross straps, three t-hooks attached at one end and a chain on the other. This basket strap is commonly used on Chevron Tow Trucks.

These Grade 80 Chain assemblies include a Grab Hook at each end for length adjustability.

This replacement chain comes with a u-bracket and pins that be attached to 2" ratchets and 2" wide handled ratchets.

Bolt Style Shackles offer the safest way to connect a web shackle to a recovery strap. By adding the nut and bolt feature it now provides added peace of mind when using the web shackles for normal recovery or accidental side loads.

This replacement forged finger hook can be attached to 2" ratchets and 2" wide handled ratchets.

This is a heavy, strong, multi-purpose tool that will save you time and effort on the job. With its hardened blade, this bar can be used for many stripping and prying tasks, such as aligning walls during tilt-up construction, roll and align large pipe and removing shingles and flooring.

Underlift Tie-Down Straps will give you a secure tie-down and help you avoid damage that is commonly associated with chain straps. These 3" wide tie-downs are 64" long and come with short handled ratchets and rubber covers.

Available in Classic, Tower's Edge or Heavy Duty webbing these systems include: four 14' long straps with snap hooks, four short straps with lined eyes and four ratchets with snap hooks. These Tie-Down Systems are simple to install, yet provides a secure, damage free tie-down. Systems do not touch a vehicle's suspension, chassis or body, thereby preventing any damage that might occur when using chains. These kit are completely adjustable to fit any car or truck tire size. They are also available in any strap length and hook combination.

This Low Profile V-Chain has two 2' legs with a 15" j-hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. Use the new Low Profile V-Chains from B/A to reduce damage to the under carriage of vehicles. By using an oblong link the hook of the winch line is now in a horizontal plane, with the tip of the hook pointed away from components that could otherwise be damaged. This reduces the risk of puncturing the vehicles' oil pan, transmission, valance, bumper, radiator, etc.

This Pear Link comes with two Grab Hooks mounted onto it. Add this to your chain to give you an additional hook up option.

These Bolt on D-Rings come with a two hole mounting bracket, which adds an extra tie down point without welding. The brackets are 1-5/8" wide and 3/16" thick with square mounting holes that accept 3/8" Carriage Bolts.

This Grade 70 Auto Transport Chain comes with a four hook cluster attached at one end, giving you multiple hook up options. These hook clusters include a forged mini Datsun hook, grab hook, r-hook & t-hook. Grade 70 transport chain is produced from heat treated carbon steel, making it the standard for towing, logging and tie-down applications. It is yellow zinc plated for easy identification. This chain is not approved for overhead lifting.

Available in Classic or Tower's Edge webbing these Low Profile V-Straps has 8" J-Hooks and Mini J-Hooks attached to the end of each leg. Legs are available in 24" or 30". These new Low Profile V-Straps from B/A Products help reduce the damage inflicted on the under carriage of a vehicle. By using an oblong link, the hook of the winch line will be on a horizontal plane, with the tip of the hook pointed away from components that could be damaged. This position greatly reduces the risk of puncturing a vehicles' oil pan, transmission, valance, bumper, radiator, etc. All V-Straps, from B/A, are reinforced with Cordura eyes for maximum resistance to tears, cuts and abrasions.

This replacement strap ratchet has a durable design that meets or exceeds OEM specifications and offers a patented double locking mechanism. This 2" ratchet comes with a double j-hook.

This V-Chain has two 2' legs with an 8" j-hook and hammerhead t-j combo hook attached to the end of each. The pear link that connects the legs also has two grab hooks connected to it. The pear link provides a dedicated 60 degree pull-point which not only allows for a higher work load limit but enables a safer environment for both the operator and hardware, as it lowers the risk of the hook or other attachment from sliding completely around.