Century

This is a replacement remote for older and early 2000's Vulcan 810 wreckers.

This is a 5/8-11 X 1 Hhcs Gr8 Zp from Miller Industries.

This is a Miller seal kit for 0307040 and 0302785.

This is a 5/8" helical lock washer Zp from Miller Industries.

This is a Miller seal kit for 0303091.

Miller Industries heavy duty slide pad for the Century 1075S / SDU/4 underlift.

This is the Seal Kit for the Lift Cylinder on the Wheel Lift of a Challenger 4700 Series and a Holmes 440 Series / DFT 400 light duty wrecker by Miller Industries. This seal kit is used on lift cylinder part number 12-0302341. To view part schematics click on the Brochure tab.

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this right hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Right Hand L-Arm Tire Restraint 12-0904157. To shop for the left hand version of this receiver, 12-0904152, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902897.

• New style Century "Pivot-L" with line-up pin
• Get a left hand version of this receiver, 12-0904152, by clicking here
• Accepts a Right Hand L-Arm Tire Restraint 12-0904157
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

This Bed Pivot Pin from Miller Industries is for the bed of car carriers. It is used in the Subframe assembly of Century and Vulcan LCG 12, 16, and Generation II 16 Series Car Carriers. Please see the brochure tab for a list of breakdowns.

This is a Miller snap ring-internal 1-1/2.

This is a Miller key fob, only 4 function.

This is a Miller rotary select switch operator.

This is a replacement single remote winch valve that is used on car carriers. This part can be used to replace Part Number 12-0301849.

This Inner Crosstube Weldment from Miller Industries uses a 3" x 3" square tube and has a built in trailer ball plate. It is used in the wheel lift and slide-in tire restraint assembly on Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the brochure tab for a list of breakdowns.

Note: Special Handling Fees Apply

Also known as a wheel grid, or slide bar, this left hand outer crosstube with a line up pin from Miller Industries fits 3" x 3" square tubes. It is used on the outer crosstube and pivot assembly of Century Car Carriers and Wreckers. It can also fit Century Formula I Wreckers, Holmes DFT-400 Wreckers, and Champion 10 Series Car Carriers. This crosstube accepts a Left Hand L-Arm Tire Restraint 12-0904156. To shop for the right hand version of this receiver, 12-0904153, click here. Please see the brochures tab for assemblies and breakdowns. This part can be used to replace Part Number 12-0902896.

• New style Century "Pivot-L" with line-up pin
• Get a right hand version of this receiver, 12-0904153, by clicking here
• Accepts a Left Hand L-Arm Tire Restraint 12-0904156
  
  Fits:
  
  
• 2001-2004 Century 10 Series Carriers
• 2002-2005 Century 15 Series Carriers
• 2009-Current Century Modular 400 & 600 Wreckers
• Century Formula I Wreckers
• Champion 10 Series Carriers
• Holmes DFT-400 Wreckers

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

This 2" External Snap Ring from Miller Industries is used on the Outrigger, Wheel Lift and Recovery Boom Assembly of Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This Hex Head Cap Screw from Miller Industries is used in many different assemblies on Miller Wreckers. These include Century, Challenger, Eagle, Holmes and Vulcan Wreckers. See the features below for a list of trucks and see the brochure tab for a list of breakdowns.

This is a Miller 1/4 helical lockwasher zp, see 81266.

This Adjustable Yoke from Miller Industries is used in the Winch Clutch Control assembly of several Miller car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers. Also see the brochure tab for a list of breakdowns.

This is a switch for a rocker tailboard.

This is a 810 Vulcan 12V hydraforce coil.