Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The RAM-B-138U consists of a medium length B size 1" double socket arm, one 2.5" diameter round ball base, and one diamond ball base (both bases feature the universal AMPS hole pattern). The ball and socket system provides shock and vibration damping, and allows for near-infinite adjustability to achieve an ideal viewing and operating angle of your device.
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
This universal drill-down laptop kit installs quickly and easily into most vehicles by using self tapping screws, or by drilling and then bolting down the mount base to the vehicle*. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray.
The RAP-299-3-UN8U consists of the RAM-A-CAN cup holder base, double socket system and universal spring loaded X-Grip? cradle for 7"-8" tablets. The cup holder base includes a 6" flex mounting feature. A durable composite shell construction and soft fins that can be trimmed to fit makes the cup holder mount one of the most portable and versatile Go Anywhere products offered. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your tablet. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip? is the cell phone cradle evolved.
This RAM? No-Drill laptop stand system installs quickly and easily into a variety of Ford F-Series and Ford Excursion vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 . Dual swing arms provide articulation and 12 of reach for passenger and driver access to the mounted device. RAM? rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM? Tough-Tray laptop holder accommodates 10 to 16 wide laptops, and 17 wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM? Tough-Tray . In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM? mounting solutions.
Get the most out of your tablet with the RAM Tab-Tite universal clamping cradle. With 2 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.
Ideal for vehicle windshields, the RAP-B-166-UN7U consists of a 3.3" diameter RAM Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM X-Grip phone holder. The RAM X-Grip features an 'X' design that expands and contracts to provide a perfect fit for your device - even if it's in a case. Made of high-strength composite and stainless steel, this version of the RAM X-Grip fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. RAM ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle - while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM X-Grip includes a device tether that is recommended for added security and peace of mind.
The RAM-B-316-1-UN9 consists of the RAM POD I universal No-Drill? vehicle base, 18 rigid aluminum rod, socket system and universal X-Grip? clamping cradle for 10" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The X-Grip? clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip?.
The RAM-B-166-UN8U consists of a 3.3" diameter RAM? Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM? X-Grip? 7"-8" tablet holder. The RAM? X-Grip? features an 'X' design that expands and contracts to provide a perfect fit for your device - even if it's in a case. Included are easy access grip knobs located on the back of the cradle for quick release of your tablet. No matter what double socket arm and mounting base you pair the RAM? X-Grip? with, RAM? ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle - while also extending the life of your phone by providing shock and vibration damping. The RAM? X-Grip? tablet holder includes a device tether recommended for added security and peace of mind. This version of the RAM? X-Grip? holder is compatible with tablets that will fit the dimensions listed below. It is important to verify the dimensions of device with its case, sleeve, or skin when determining the overall size.
The RAM-B-101-C-UN9U consists of (2 QTY) 2.5" diameter round bases with the universal AMPS hole pattern, LONG double socket arm and universal RAM? X-Grip? clamping cradle for 10" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM? X-Grip? clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The RAM? X-Grip? clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the RAM? X-Grip?.
This RAM? No-Drill laptop stand system installs quickly and easily into a variety of Chevrolet and GMC vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 . Dual swing arms provide articulation and 12 of reach for passenger and driver access to the mounted device. RAM? rubber ball and socket technology provides additional adjustability as well as shock and vibration isolation. The spring-loaded RAM? Tough-Tray laptop holder accommodates 10 to 16 wide laptops, and 17 wide screens. The tray features four adjustable retaining arms with rubber grips that can be moved both vertically and horizontally. These arms allow for a custom fit for laptops of varying thickness while not blocking drives or ports. A screen support and USB light are also available to accessorize the RAM? Tough-Tray . In addition, hole patterns on the perimeter of the laptop holder are compatible with several RAM? mounting solutions.
The RAM? No-Drill RAM-B-316-1-202U vehicle mount consists of the RAM? POD I base, 18 rigid aluminum rod, B Size 1" ball socket arm, and a round ball plate. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device an ideal viewing and operating angle. The 2.5" diameter round base adapter contains the universal AMPS hole pattern. For proper fit, make sure your vehicle has an appropriate bolt to mount the base securely. The RAM-B-316-1-202U is not compatible with 2014 and newer Chevrolet seats that have the seat hook system.
The RAM-B-316-1-238U consists of the RAM POD I universal No-Drill vehicle base,18 rigid aluminum rod, single 1" ball socket arm and diamond base adapter. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The RAM POD I will hold everything you need safely and securely. The diamond adapter base consists of a 1" diameter rubber ball connected at right angles to a 2.43" x 1.31" diamond base. The base has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM Mount and third party cradles.
Ideal for vehicle windshields, the RAM-B-166-UN7U consists of a 3.3" diameter RAM? Twist-Lock suction cup base, medium length double socket arm, and the popular spring-loaded RAM? X-Grip? phone holder. The RAM? X-Grip? features an 'X' design that expands and contracts to provide a perfect fit for your device - even if it's in a case. Made of powder-coated, marine-grade aluminum, stainless steel components, and high-strength composite, this version of the RAM? X-Grip? fits phones ranging from 1.87" to 3.25" in width and keeps your device completely functional and accessible. RAM? ball and socket technology allows for near-infinite adjustability to achieve the ideal viewing angle - while also extending the life of your phone by providing shock and vibration damping. For outdoor applications, the RAM? X-Grip? includes a device tether that is recommended for added security and peace of mind.
This kit includes the RAM-234-6 with the RAM POD I with a 1.5" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM-POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt.
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
The RAM-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 2.42", this is the lowest profile RAM? double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.
The RAM-B-201U consists of a medium double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 3.73", this is the standard RAM? double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.
The RAM-B-138-UN7U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal spring loaded RAM? X-Grip? cradle for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The included RAM? X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded RAM? X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM? X-Grip? is the cell phone cradle evolved. The RAM? X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-316-1-UN8B consists of the RAM POD I universal No-Drill vehicle base, 18" rigid aluminum rod, socket system and universal spring loaded X-Grip? cradle for 7"-8" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Ram no-drill mount is designed specifically for 2012-2021 Ram 2500-5500 trucks. This mount requires no drilling into the vehicle and installs on the passenger side using the existing seat bolts.
The RAM-B-102-UN7U consists of a diamond base, double socket arm and universal spring loaded X-Grip? cradle for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the X-Grip? mount to your optimum viewing position. The 2.43" x 1.31" diamond base has two holes 1.912" from center to center and matches the industry standard AMPS hole pattern. The included X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip? is the cell phone cradle evolved. The X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAM-B-166U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Now that you ve got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.
The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN II cup holder base serves as a mounting point for the diamond base.
This Locking Twist Lock Suction Cup Mount for Apple iPad attaches quickly and easily to your truck windshield, dashboard or any flat, smooth surface. Ball joints allow you to easily bend the mount in any direction to ensure the perfect viewing angle for your tablet. Tightening the locking knob holds your desired position. Dial combination lock in the cradle helps prevent theft. Patented design dampens shock and vibration to help extend the life of your iPad?. Features 3-1/4" dia. base and four mounting points with pre-drilled holes on the back. Design allows for easy access to all ports on your device.
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops and (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
The RAM-B-230U double ball adapter consists of two attached B size 1" rubber balls that allow the connection of two B size double socket arms. When measured from ball center to ball center, the length is 1.75".
The RAM? No-Drill laptop mounting base for the Ford F-150 and Transit Connect van, features a heavy-duty steel mounting base custom designed to fit these vehicles perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
The RAM? No-Drill laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.
The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip? clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip? clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip?. The X-Grip? cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The Tough-Wedge is a seat wedge mount that fits in the gap between the vehicle seat and center console; allowing easy access and operation of your mobile device. The Tough-Wedge can also be used for back-seat applications, inserted into the pockets located on the back of the front seats. For capturing video on the go, place the Tough-Wedge in your backpack with a RAM camera mount. The included diamond adapter contains the industry standard AMPS hole pattern that allows attachment to a variety of RAM mounts. Hardware included to attach the Tough-Wedge to the mount.
This kit includes the RAM-234-6 with the RAM POD I with a 1" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt.
The RAM Tough-Tray is spring loaded expandable tray that can accommodate 10 to 16 inch wide laptops. The tray includes four side clamping arms with rubber grips to keep your laptop secure in any rugged environment. These arms can be moved both vertically and horizontally, allowing a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS, PDAs or other electronics.
Blending the best of versatility, strength and installation ease; the RAM POD HD is a workhorse for fleet and serious consumers alike. Compatible with a wide range of vehicles and simple to install, the RAM POD HD is an ideal solution for mounting tablets, small laptops and other similar devices. Requiring minimal space in the vehicle cab, it can be remove quickly without the use of tools. The versatility of the RAM POD HD makes it an ideal solution for mixed vehicle fleets, consumer vehicles of all types and other applications which require a robust mounting platform for your tablet.
This Handi-Case with Floor Mount mounts to the floor of your vehicle. Ball joints allow you to easily bend the mount in any directio n to ensure the perfect viewing angle for your clipboard. The rugged case with clipboard provides you a stable writing surface and s torage inside. Plus, when you are on the go, it can go with you - the case with clipboard removes easily from the mount to provide y ou with a writing surface in the field.
The RAM-B-101LU consists of a double socket arm, two 2.5" diameter round bases that contain the universal AMPS hole pattern and locking knob. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the round base adapter will connect to many RAM cradles, including all iPad cradles. The included RAM s patented design dampens shock and vibration, helping to extend the life of your device.
Almost everyone wants a tablet pc so don't let someone get yours for free. Keep it safe with the new RAM locking Tab-Lock tablet cradle. This product is sure to make most would-be thieves think twice about trying to steal yours. Our easy to use locking cradle not only looks great and performs flawlessly, but it is compatible with RAM's full line of mounting solutions ideally suited for personal and fleet use. Spring loaded and form fitting, this compact yet durable cradle won't take up a lot of space yet provides loads of security. With the new Tab-Lock tablet cradle, RAM lets you keep your tablet where it belongs...in your possession.
This drill-down laptop stand system installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation.The RAM? Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.
The RAM-B-138-UN8 consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal X-Grip?clamping cradle for 7"-8" tablets. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
The RAP-299-3-UN7BU consists of the RAM-A-CAN cup holder base, double socket arm and universal X-Grip? cradle. The cup holder base includes a 6" flex mounting feature. A durable composite shell construction and soft fins that can be trimmed to fit makes the cup holder mount one of the most portable and versatile Go Anywhere products offered. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip? is the cell phone cradle evolved.
The RAM-B-166-MP1U consists of a 3.3" diameter suction cup twist lock base, double socket arm and RAM Multi-Pad . The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The RAM Multi-Pad is the perfect product to keep your busy life organized. With several mounting points and integrated magnets for holding your ferrous metal pen securely without the need for clips, the RAM Multi-Pad is ready to get to work for you.
The RAM Handi-Case is capable of doing so many tasks it will astound you. When a brief case it too much but a notepad, is not enough, the Handi-Case is exactly what you need. Beyond just a writing surface, you get document storage, tool holder, pen and pencil storage, and of course, RAM's rugged construction. No matter where the job takes you, the RAM Handi-Case is ready to multi task. For any professional on the go this is the tool to keep you organized at home, at the office, or on the go regardless of what you ride, drive, or fly.