SaltDogg

This is a SaltDogg dumpbody tailgate latch kit, use on 3-9 YD spreaders.

This is a replacement universal spinners & hubs counter clockwise. S.A.M.

Direct Drive Under Tailgate Spreader, 5:1 Reduction Ratio Gearbox, Dimensions; 98" x 19" x 17", Weight; 405 lbs., Screw-Type Auger Feed Mechanism, 18" Polymer Spinner, Spread Width; 5-30 feet, Recommended Use; 3/4 and 1-Ton Trucks

This is a SaltDogg TGS Series Vibrator Kit.

SaltDogg tailgate spreaders gearbox only.

2" Receiver Tube Mount fits TGS01 & TGS05 series. Was designed to fit 2" receivers. These mounts allow you to mount and dismount spreaders quickly and easily. Fits most pickup trucks regardless of tailgate width.

Stainless Steel Direct Drive Under Tailgate Spreader. Dimensions; 98" x 19" x 17". 15" Side Pill Plates. Weight; 392 lbs. Screw-Type Auger Feed Mechanism. 18" Polymer Spinner. Spread Width; 5-30 feet. Recommended Use; 3/4 and 1-Ton Trucks.

This is a SnowDogg chain-type tie down kit, use on 3-9 YD spreaders.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 105-gallon polymer reservoir (69"L x 20"W x 25"T). Hydraulic, 4.5 GPM@1,750 RPM (150 PSI) with proportioning valve, bronze pump, bronze gears, stainless steel shaft. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

In-Bed Liquid Spray Kit, 2" Hitch Mounted, 12 VDC, 28 Amps Maximum, 335 Gallon Poly Reservoir, Stainless Steel Pump Housing, 160 lbs., One Person Installation

This mount is for the TGS05 & TGS01 series tailgate spreaders. It allows you to enjoy the benefits of easy access to your pickup truck bed. Wintergate mounting system accommodates any domestic, full-size pickup truck width. It allows yo to remove 2 quick pins and rotate the entire spreader out of the way for full-bed access.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. (2) 105-gallon polymer reservoir (69"L x 20"W x 25"T). Hydraulic, 4.5 GPM@1,750 RPM (150 PSI) with proportioning valve, bronze pump, bronze gears, stainless steel shaft. Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain.

These SaltDogg Spreaders by Buyers Products are designed for dump bodies and flatbeds with a 13,000 lb GVW. They are available with 96", 108", or 120" hoppers with a capacity from 2.5 to 3 cubic yards. Theses spreaders can come equipped with a Gas Engine, Electric Motor, or a Hydraulic Motor depending on what works best with your intended application. The gas powered spreaders come with a 10.5 HP gas engine with convenient electric start and throttle control. The electric powered spreaders come with two independent electric motors, one for the conveyor and one for the spinner. The hydraulic powered spreaders come with two independent motors for independent conveyor and spinner operation. These spreaders work great with bulk salt, bulk sand, or a salt and sand mixture. These are quality spreaders that are made here in the USA.

Stainless Steel Electric Drive Under Tailgate Spreader, Dimensions; 99" x 22.5" x 17", Weight; 575 lbs., Screw-Type Auger Feed Mechanism, 14" Polymer Spinner, Spread Width; 5-30 feet, Recommended Use; 3/4 and 1-Ton Trucks

Completely self-contained, ultra durable spreader unit designed for ice and snow control. The rugged design allows for use with salt, sand and other materials. The complete assembly mounts easily on pickup, dump and platform trucks making it ideal for municipalities, shopping malls, industries, hospitals and private contractors Stainless steel adjustable chute hopper spreader features dual,ultra-quiet 12V direct-drive electric motors, providing independent control of drag chain and spinner. The rugged design allows for use with salt, sand and other materials. The complete assembly mounts easily on 3/4-ton and 1-ton pickup, dump and platform trucks making it ideal for municipalities, shopping malls, industries, hospitals and private contractors. MATERIAL HOPPER - High-quality grade 304 stainless steel components, including: Hopper, Hopper Supports, Hopper Floor, Gussets, Spinner Chute Assembly, Deflectors and Engine Hood. Electrically welded ends and sides sloped at 45 degrees are constructed with channel formed top edges. Vertical supports add extra strength to the unit. The single lift point on the cross support beam is located at the unit's center of gravity to allow for easy loading and unloading. CONVEYOR - The conveyor is made of 12" wide all-steel pintle chain with 3/16" x 3/4"cross bars. Chain strength is 11,000 lbs.per strand;22,000 lbs. total weight. The drive sprockets are 6-tooth cast iron, on a 1-1/8" diameter shaft. The conveyor chain has an adjustment range of 3-1/2". The drive shaft has heavy-duty, sealed, self-aligning ball bearings with grease fittings. The idler drum has heavy-duty 1" diameter ball bearings. CONVEYOR GEAR CASE - Gear is constructed of aluminum bronze, worm gear is hardened steel and ground. Housing is made of durable cast iron. Gear ratio is 20:1 with 1" input shaft and 1-1/8"output shaft on tapered roller bearings. SPINNER CHUTE ASSEMBLY - Feature high-quality grade 304 stainless steel Spinner Chute Assembly, Deflectors and Hood. A polymer disc with four fins is connected to a 3/4"diameter shaft secured on two pillow block bearings. The spreading material is guided from the conveyor to the spinner plate through an enclosed chute with internal and external deflectors. Adjustable deflectors allow for complete directional spread control and full or compact spread. Total spread radius ranges from 2' to 25'. The extra wide rear deflector protects the rear and under carriage of the vehicle. FEEDGATE - Lever operated with a friction lock for accurate adjustment.

This is a SaltDogg Spreader 12 Volt DC .75 Horsepower Gear Motor - Fits: 92440SSA, 1400600SS, 1400700SS, 5535000.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SCH series spreaders.

These replacement tailgate spreaders from Buyers Products are designed to fit in place of the tailgate on a 1 ton super duty dump body. They have a 6" auger and are made from 304 stainless steel construction. These spreaders are ideal for dump bodies with low ground clearance. These spreaders are available with center or driver side discharge and available with electric or hydraulic power options. These spreaders have an 18" poly spinner that casts material with 25'. These are quality spreaders that are made in the USA.

This is a hose reel SS with an adjustable spray nozzle, use with in bed liquid spray.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SHPE1500/2000 series spreaders.

This is a hose reel SS with an adjustable spray nozzle, use with in bed liquid spray.

This is a hose reel with an adjustable spray nozzle, use with in bed liquid spray.

Liquid Spray System applies chemical agents (salt brine, calcium or magnesium chloride, glycol, etc.) to salt, sand or other material as it is being dispersed onto a road surface. Reduces salt consumption by up to 30%. 30-gallon polymer reservoir (48"L x 13"W x 14"T), 12-volt, 3 GPM/45 PSI electric diaphragm pump, Low Pressure - empty tank light/buzzer indicator. In-cab variable speed pump control. Includes complete systems tank, pump, pump enclosure, cab controller, hoses, fittings, ball valve, filter, wiring, connectors, brackets and tie-downs. Stainless steel mounting brackets. Enclosed system for corrosion resistance. Easy to use and maintain. Fits SCH series spreaders.