0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller Drivers Side Bed Lock Hold Down LCG Gen II
This is a Miller Industries bed lock hold-down for the driver side on
Century/Vulcan Generation II car carriers. Refer to bed lock assembly
15-364220K.
$65.99
Miller Passenger Side Bed Lock Hold Down LCG Gen II
This is a Miller Industries bed lock hold-down for the passenger side on
Century/Vulcan Generation II car carriers. Refer to bed lock assembly
15-364220K.
$65.99
AW Direct 8-Point Tie-Down Assembly w/ Chains
AW Direct 8 Point Tie-Down Kit with Chains includes four (4) winch straps
with 12" chain ends, four (4) standard ratchets with chain ends and four (4)
dogbone straps to secure most vehicles to a car carrier flat deck. The webbing
is abrasion resistant and heavy-duty hardware holds up to repeated use. These
tie-down assemblies are available in two lengths, 14' or 18'.
$168.99
–
$178.99
All-Grip Weldable Grab Hook
This is a strong, weldable Grade 70 grab hook. With the ability to handle a working load limit of 11,300 pounds, check the drop-down menu for more information, the All-Grip Weldable Grab Hook is strong enough for your job. Plus this grade 70 hook comes in three sizes so you can find what you need.
$6.99
–
$14.99
Crossbar Positioning Plate, For Century 3212,Holmes 600R and Vulcan V30 Wreckers
This crossbar positioning plate fits Century 3212, Holmes 600R and Vulcan V30
heavy duty wreckers.
$50.99
Miller Bed Lock Roller Wheel LCG Gen II
This is a Miller Industries bed lock roller on Century/Vulcan Generation II car
carriers. Refer to bed lock assembly 12-364220K. Each assembly includes 2
rollers.
$52.99
Washer, Split Lock, 3/8"
Split Lock Washers provide a positive locking action. The spring like take-up
compensates for loosening caused by slight material wear. This split lock
washer has a size of 3/8" and a thickness of .094".
$5.49
1/2 13 Hex Jam Nut Zp
This Hex Jam Nut from Miller Industries has a 1/2" diameter with 13 threads per
inch. It isused on the Winch Clutch Control of 4-Ton Hydraulic Winches, H-246
and HD-200R. This winch assembly is used on several Miller Car Carriers,
including Century, Challenger, Champion, Holmes, and Vulcan Carriers.
See the features below for a full list of carriers.
Also see the brochure tab for a list of breakdowns.
$0.39
Miller Winch Clutch Spring Holder
This is a replacement clutch spring holder in the winch clutch control
assembly. This is the part that attaches the compression spring to the
adjusting yoke in the winch control assembly.
$14.69
Miller Spring Winch Clutch Control
This Spring from Miller Industries is used in the Winch Clutch Control assembly
of several Miller car Carriers. These include Century, Champion, and Vulcan
Carriers. See the features below for a full list of carriers. Also see the
brochure tab for a list of breakdowns.
$16.59
Miller Adjustable Yoke, Winch Clutch Control
This Adjustable Yoke from Miller Industries is used in the Winch Clutch Control
assembly of several Miller car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers. Also see the brochure tab for a list of breakdowns.
$16.59
Miller T Handle Winch Clutch Control
This T Handle from Miller Industries is used in the Winch Clutch Control
assembly of several Miller car Carriers. These include Century, Challenger,
Champion, Holmes, and Vulcan Carriers. See the features below for a full list
of carriers. Also see the brochure tab for a list of breakdowns.
$8.89
Miller Cotter Pin 1/8" x 1 1/4"
This Cotter Pin from Miller Industries is used on the Winch Clutch Control of
4-Ton Hydraulic Winches,
$5.49
Century Cable Tie Back HD Wreckers
This spring secures winch cable hook on large wreckers. This spring is used on
Vulcans and late model Century units as a cable tie-back. This spring links to
the hook with a pear link #9048800. Uses a 12-0804054 cable tie-back mounting
tube. Compatible with 2004 Units and Newer.
$26.49
Miller Retaining Ring, 1-1/2"
This 1-1/2" Retaining Ring from Miller Industries is used on many different
assemblies including boom, Subframe, recovery boom, wheel lift boom, underlift,
dual and single winch extendable boom, and dual and single winch non-extendable
boom assemblies. These assemblies can be found on many Century, Challenger,
Champion, Eagle, Holmes, and Vulcan Wreckers. See the brochures tab for a full
list of assemblies and part schematics.
$7.49
Miller Pin Weldment, Crossbar Pivot, Century and Vulcan
The Crossbar Pivot Pin Weldment from Miller Industries is used on the Underlift
Assembly of Century 3212, Vulcan V30 and Holmes 600R Wreckers. This Pin has
actually replaced part number 3012-801100, which was used on the Century 3212
and Vulcan V30 Wreckers. Please see the brochure tab for breakdown schematics.
$237.99
1/2 HCL Zinc Plated Lockwasher
This is a 1/2 HCL Zinc Plated Lockwasher from Miller Industries.
$0.09
Related products
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
Chevron Pin and Link Assembly
This Pin and Link Assembly from Miller Industries is used on the Control
Components Assembly of Chevron Car Carriers. These include 14, 16, 20 and 30
Series Car Carriers. Please see the features below for a list of trucks and see
the brochure tab for breakdowns.
$33.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Miller Inner Boom Bushing
This Bronze Bushing from Miller Industries is used on the Inner Boom of the
Wheel Lift Assembly of Champion Car Carriers made before 2001. This busing has
a 3" inner diameter. See the features below for a full list of carriers.
This part can be used to replace Part Numbers: 12-0301914 and 12-0301383.
$86.99
Handle Bracket
This is a handle bracket for Gresen V20 Valve. This piece bolts onto the valve
assembly itself and is use to hold the control rod linkage to the valve.
$39.99
Ramsey Seal Kit
This gasket and seal kit is for the H-200 series Ramsey winch with the " keyhole style " worm gear housing cover.
$73.99
Cable Tie, Black, 11.1"
Fastenal 11.1" 50 lbs. tensile UV black nylon 6.6 Power Phase cable tie.
Cable ties secure wire bundles, harnesses and components quickly without
slipping. Sold Each (Individually)
$0.19
Miller Grommet, Rubber, Century and Vulcan Wreckers
This Rubber Grommet from Miller Industries is used on the Body Assembly and Light Accessory Assemblies of Miller Wreckers. These include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Number FF-116.
$2.99
Washer, Flat 5/16" Stainless Steel 18-8
Fastenal 5/16" 18-8 stainless steel small OD flat washer.
$0.09
Miller Composite Bell Crank
This Composite Bell Crank from Miller Industries is used on the 6 and 9 Spool
Control Station of Century Generation II LCG 16 Series Steel & Aluminum Car
Carriers. These carriers are made in 2014 or later. Please see the brochure tab
for a list of breakdowns.
$13.29
