Wear Pad Kits

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21'6" & 22'2" Stee l Car Carrier. See Features for a list of parts that are included.

This is a wear pad retainer plate on the up/down portion of the wheel lift by Miller Industries. It is bolted on by 3 bolts. This retainer plate fits the following wreckers: Vulcan 880/890, Modular 880/890, and 896/897. See Features for related hardware and Brochures for reference charts.

Jerr Dan rollback wear pad kit for 19' Jerr Dan carriers. Fits BIC (Best In Class) carriers and should be compatible with the following bed model numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB, ATRB, AWLB

Wear Pad Kit, Century Formula 6500 and Holmes DFT-650 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

This Heavy Duty Flat Socket Bolt measures 1/4" x 1" with a thread size of 20.

This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit

Jerr Dan rollback wear pad kit for 20' and 21' Jerr Dan carriers. Fits BIC (Best In Class) carriers and should be compatible with the following bed model numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB, ATRB, AWLB

This is an inner tube slide pad for the bottom side of the wheel lift on Century, Vulcan, & Champion car carriers excluding the LCG Series. See Features for which years/models they are used on.

This is the spacer bar by Miller Industries that is located on the up/down portion of the outer stinger weldment on a Vulcan Light Duty Wreckers. This spacer bar will fit on the following models: Vulcan Modular 880/890, 880/890, 896/897. There are two of these spacer bars for each wheel lift. See features for related hardware and see brochures for reference charts. Sold as Each.

This is a zinc plated 1/4"-10 Nylon Lock Nut used in the assembly of our Bearing Pad Kits.

This is a 16" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit

This wear pad kit is for Jerr-Dan car carriers. It fits 17' AWL (Wrangler light and old style) carriers made between 1982 and 1986. The kit comes with wear pads and hardware and includes 14 wear pads, 28 flathead machine bolts, 34 lock washers, 34 hex nuts, 2 wear pads, 4 hex cap screws, 2 nylatron pads, 2 flathead machine bolts.

This is a 3/16"x1"x3/8" stop bar for the bearing pads on all Aluminum Carriers. This part is included in the Bearing Pad Kits

This is a wear pad holder on the up/down portion of the wheel lift by Miller Industries. It is bolted on by tow bolts and there are 2 wear pad holders per wheel lift. This wear pad holder fits the following wreckers: Vulcan 880/890, Modular 880/890 and 896/897. See Features for related hardware and Brochures for reference charts.

This is a 11 1/4" long bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel Car Carrier. This part is included in the Bearing Pad Kit

This is a plate pad cage from Miller Industries.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts neccessary to replace the wear pads on a 19'6" Steel Car Carrier prior to 2010. See Features for a list of parts that are included.

This Inner Boom Slide Pad from Miller Industries is used on the Boom Assembly of Century and Challenger Wreckers. The Pad is 9" long, 2.5" wide and .5" thick. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a guide pad on the lower portion of the wrecker boom of the Century 211, 212, 300 Series, EB4 Express, and EB4 6500. This guide pad also fits the Challenger Express 4300 Series and Champion Model 101 Wreckers by Miller Industries. See Brochures for a reference chart and Features for related parts.

This is a shim pad on the lower portion of the wrecker boom of a Century 211, 212, 300 Series, EB4 Express, and EB4 6500. This shim pad also fits the Challenger Express 4300 Series and Champion Model 101 Wreckers by Miller Industries. See Brochures for a reference chart and Features for related parts.

This is a wear pad for the stabilizer of the wheel lift on all Century and Vulcan 12 & 16 Series LCG Car Carriers. Each LCG Carrier is equipped with 2 of these pads, however, they are sold separately.

This is a 16" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit

12s/16s Steel Beds I Beam Wear Pad