Wear Pad Kits

This is a 216" long bearing pad by Miller Industries. This is a full length slide-in type pad that inserts into the groove in the aluminum sub-frame. It is one of the replacement pads for all 17'6" & 19' Aluminum Car Carriers. This part is included in Bearing Pad Kits:

This is a replacement spacer pad that bolts to the underside of the underlift boom to help the boom slide in and out efficiently. This pad is used on Century and Challenger heavy duty wreckers by Miller Industries. To view specific models this pad fits see Features below. To view the part schematics click on the Brochure tab.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 2010 or newer 19' and 21' 10 Series Steel Car Carrier. See Features for a list of parts that are included.

• (2) 12-0308928-16 5/16"x16" Subframe Bearing Pads
• (2) 12-0308928-66 5/16"x66" Subframe Bearing Pads
• (2) 12-0308928-96 5/16"x96" Subframe Bearing Pads
• (38) 15-81007 1/4-20x1"x82 Deg Torx Scres
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads

Bottom wear pads for the underlift on a Vulcan V60 or V70 wrecker.

This is a wheel lift wear pad for the lower tilt column on Holmes and Vulcan Wreckers. This wear pad will fit on the following wrecker models: Holmes 600R, Vulcan 880/890, Modular 880/890, 896/897. See Brochures for reference charts.

This is a replacement spacer pad for the second stage of the underlift boom on Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts to the underside of the underlift boom. It helps slide the boom in and out efficiently. It also catches on the wear pad mounting bracket of the next stage of the underlift boom to slide that section out. To view specific models this spacer pad fits see Features below. To view the part schematics click on the Brochure tab.

This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers from Miller Industries. Please see the features below for a list of Wreckers and see the brochure tab for breakdowns.

This is a stop pad for the wheel lift on a Century Midnight Express by Miller Industries. It is located on multiple locations on the boom assembly on the Midnight Express.

This is the outer tube shim pad for the side, inside of the wheel lift by Miller Industries. This Shim Pad will fit the following wreckers: Century Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series, Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular 880/890. See Brochures for reference chart and Features for related hardware. Each pad sold separately.

This is a 36" 10 series wear pad from Miller Industries.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 17'6" & 19' Aluminum Car Carrier. See Features for a list of parts that are included.

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 19' 10 Series Steel Car Carrier 1996 and later. See Features for a list of parts that are included.

This is an inner tube slide pad for the top side of the wheel lift on the Century 12 & 16 Series LCG Generation II Car Carrier. Each pad sold separately.

This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit

Jerr Dan rollback wear pad kit that is compatible with AEL, RST and WAR carriers manufactured November 1991 through the current year. Also fits AWL, AVP and SVP beds manufactured October 1994 through the current year. This kit comes with all of the necessary mounting hardware and 12 total pads that have different measurements. See the features below for a list of measurements.

Note: Special Handling Fees Apply

This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit <a href="http://zips.com/parts-detail/miller-bearing-pad- kit-steel-lcg-21%27-12-0940277"target="_blank"/>12-0940277</a/>.

• 5/16"x96" LCG Subframe Pad
• 2010 & Newer 10 Series Car Carriers

Wear pad kit for a 19' Century 10 series aluminum carrier. The Kit includes parts for 1 side only. This is a full length slide-in type pad that iserts into the groove in the aluminum sub-frame.

Miller Industries wear pad for the wrecker boom.

Note: Special Handling Fees Apply

This replacement wear pad kit fits Miller 21' LCG Car Carriers.

• Fits 21' LCG Car Carrier
• New Style
  
  

  Bearing Pad Kit Breakdown

• (2) Subframe Wear Pad - 5/16" x 36"
• (2) Subframe Nylatron Pad - 5/16" x 65"
• (2) Subframe Wear Pad - 5/16" x 96"
• (2) LCG20 Bearing Pad Steel Sill
• (42) Screws - 5/16-10 x 1 1/4"

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

Note: Special Handling Fees Apply

This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included.

• (2) 12-0308927-16 5/16"x16" LCG Subframe Bearing Pads
• (2) 12-0308927-66 5/16"x66" LCG Subframe Bearing Pads
• (2) 12-0308927-96 5/16"x96" LCG Subframe Bearing Pads
• (38) 12-0403114 1/4-20x1"x82 Deg Torx Scres
• (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads

Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.

This is a 60" long bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part is included in the following Bearing Pad Kits:

Miller Industries heavy duty slide pad for the Century 1075S / SDU/4 underlift.

This is a wear pad cage plate on the inside, bottom of the outer boom of a Century Formula I 411/412, and a Century 6500 600 Series Wrecker. This cage plate also fits Challenger 4700 and 4800 Series Wreckers. It will also fit Holmes 440 Series and HP552 Series by Miller industries. See Brochures for a reference chart and Features for related parts. This part can be used to replace Part Number 12-0703093.