Cylinder and Pin Replacement

Note: Special Handling Fees Apply

This is the extend cylinder for the wheel lift on Miller Industries Light Duty Wreckers. This will fit the Century EB4 Express, Century Formula I 411 & 412, Century Formula I Super Six & 500 Series, Century Formula II, Century Formula 6000 - 600 Series, Century Metro I, Century Modular 211, Century Modular 400 & 600, Century 211 & 212. It will also fit the Challenger 4700 Series, Champion Model 101, Holmes 440 Series, Vulcan Modular 804, and Vulcan Modular 806. To view specific years of wrecker models see Features below. To view part schematics click on the Brochures tab.

Dimensions: 39"L x 5"W x 5"H

Length Eye to Eye: 37.5" L
Fits:

Century EB4 Express (03/1999 to Current)

Century Formula I, Duplex Tilt, 411 & 412 Wreckers

Century Formula I, Duplex Tilt, Super Six & 500 Series

Century Formula II

Century Formula 6000, 600 Series

Century Metro I, Duplex Tilt (D.T.) Wheel Lift System

Century Modular 211 (02/2010 to Current)

Century Modular 400 & 600 (01/2009 - Current)

Century 211 & 212 (11/1997 to Current)

Challenger 4700 Series (02/1995 - Current)

Champion Model 101 (09/1994 - Current)

Holmes 440 Series / DFT 400 (10/1994 - Current)

Vulcan Modular 804 (02/2010 - Current)

Vulcan Modular 806 (02/2010 - Current)

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular 880 / 890 Series and the 896 / 897 Series. This pin is used to connect the wheel lift extend cylinder to the wheel lift inner boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Pin for the Holmes 440 Series / DFT 400 light duty wreckers by Miller Industries. This pin goes through the rod end of the cylinder. This pin attaches the tilt cylinder to the outer wheel lift boom. To view the part schematic click on the Brochure tab. This part can be used to replace Part Number 12-0801010.

This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.

This is the Lift Cylinder Pin on the Wheel Lift for Century Formula 6500 - 600 Series and Century Modular 400 & 600 Light Duty Wreckers by Miller Industries. This is the pin for the rod end of the lift cylinder. To view specific models this pin will fit see Features below. To view part schematics click the Brochure tab.

This is the fold cylinder lower pin on the wrecker boom of the Century Midnight Express and Vulcan 807 by Miller Industries. See Brochures for reference chart and Features for related parts.

This is the Wheel Lift Tilt Cylinder Pin for the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

This is the stinger pivot pin on the wrecker boom of the Century 211/212/300 Series by Miller Industries. See Brochures for reference chart and Features for related parts.

This is a pivot pin for the Boom Extend Cylinder on many Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century Formula 6000 - 600 Series, Century Formula 6500 - 600 Series, Century Modular 400 & 600, Challenger 4300 Express Series, Challenger 4700 Series, Challenger 4800 Series, Eagle EB-3 Series, Holmes 440 Series, Holmes HP 552 & DFT 650, Vulcan Modular 806, 807, 880/890 wreckers. See Features below to view models this pin fits. To view part schematics click on the Brochures tab.

This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 880 / 890 Series and the Vulcan 896 / 897 Series light duty wreckers by Miller Industries. This pin is also used to attach the wrecker boom lift cylinder to the subframe weldment on the Vulcan 896 / 897 Series wrecker. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This Extend Cylinder Outer Boom Shaft from Miller Industries is used on many different assemblies on Century, Challenger, Holmes, and Vulcan Wreckers. These assemblies include boom, front outrigger, and wrecker assemblies. Please view the brochures tab to see a full list of wrecker assemblies and parts schematics.

This is the Seal Kit for the Lift Cylinder on the Wheel Lift of a Challenger 4700 Series and a Holmes 440 Series / DFT 400 light duty wrecker by Miller Industries. This seal kit is used on lift cylinder part number 12-0302341. To view part schematics click on the Brochure tab.

This is a Seal Kit for the boom lift cylinder on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, and Champion Model 101 Wreckers by Miller Industries. To view part schematics please click on the Brochures tab.

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

This is the Wheel Lift Tilt Cylinder on Century, Challenger, and Holmes Light Duty Wreckers. This cylinder will fit Century Formula I Duplex Tilt 411, 412, Super Six and 500 Series wreckers. It will also fit the Century Formula 6000 - 600 Series, Metro I - Duplex Tilt, Modular 400 and 600 Series. It fits the Challenger 4700 Series and the Holmes 440 Series. This tilt cylinder can be used on both the left and the right side of the wheel lift. This cylinder replaces part numbers: 12-0302905, 12-0302904, 12-0303674, and 12-0303675. To view specific wrecker models this cylinder fits see Features below. To view part schematics click the Brochures tab.

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is for the rod end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This Lower-Tilt Cylinder Shaft is used on Boom and Underlift Assembly of Light Duty Wreckers from Miller. These include Century, Challenger, Champion and Eagle Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdown schematics.

This is a multi-position pin.

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Seal Kit for the Lift Cylinder on the wheel lift of the Century Formula 6500 - 600 Series and Holmes 552 / DFT 650 light duty wreckers by Miller Industries. The part number for the lift cylinder is 12-0303065. To see which specific models this seal kit fits please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Upper Pin on the Wheel Lift of a Century Modular 400 & 600 Series, Vulcan 880/890, Vulcan Modular 880/890 and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This pin connects the wheel lift's tilt cylinder to the wheel lift frame weldment. To view which wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.

This is a seal kit for the boom lift cylinder on Century Light Duty Wreckers by Miller Industries. This seal kit will fit the Century Formula I Duplex Tilt Super Six and 500 Series, and The Formula 6000 - 600 Series. To view part schematics click on the Brochures tab.