Light Duty Wrecker Parts

This is the Boom Lift Cylinder for the Century 614 Aluminum Body Series light duty wreckers by Miller Industries. This cylinder has a 5" bore. This cylinder connects to the wrecker frame weldment and the outer wrecker boom weldment. This cylinder lifts the boom up and down on your wrecker. This cylinder is used if the Serial Number of your wrecker body is after 446102. This cylinder can also be referred to as the boom elevation cylinder.

This is a replacement tensioner cover for 810 P/T boom from Miller Industries.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

This is a right hand grid weldment for a Jerr-Dan HPL60 standard duty wrecker.

This is the extend cylinder for the wrecker boom for Century and Vulcan Light Duty Wreckers. This cylinder will fit the Century Modular 300 Express Series, and Vulcan Modular 806 and 807 Series. To view part schematics click on the Brochures tab.

This is the wheel lift extend cylinder for Century EB4 wreckers. This will fit both the Century EB4 Express and Century EB4 6500. To view part schematics click the Brochures tab.

This is a Boom Extend Cylinder on Century Modular 411 and 412 wreckers. This cylinder will also fit the Vulcan Modular 880/890 light duty wreckers by Miller Industries. This extend cylinder has a 2.5" bore with a 60" stroke. This is the cylinder that extends the boom of your wrecker out and in. To view specific wrecker models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is a control handle pivot rod on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This cylinder pin goes through the base end of the cylinder. This pin connects the boom extend cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.

This is the Wrecker Boom Extend Cylinder Pin for the Century 614 Series light duty wrecker with a Formula II wheel lift. This pin goes through the rod end of the extend cylinder. This pin connects the boom extend cylinder to the inner wrecker boom weldment. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder Pin on the Century Formula II Wheel Lift by Miller Industries. This pin goes through the base end of the cylinder. This pin connects the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Century EB4 Express light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin connects the lift cylinder to the wheel lift outer boom weldment. This pin is for cylinder part number 12-0303911. To view the part schematic click on the Brochure tab.

This is the Wrecker Boom Extend Cylinder for the Century 712 & 716 Series light duty wreckers with a Formula IIIT wheel lift. This cylinder connects to the inner and outer wrecker boom weldments to move the wrecker boom in and out. To view the part schematic click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder Pin for the Challenger 4700 & 4800 Series light duty wreckers by Miller Industries. This pin goes through the base end of the cylinder. This pin connects the boom lift cylinder to the wrecker frame weldment. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series light duty wreckers with a Formula III wheel lift. This is the cylinder that raises your wheel lift boom up and down. To view the part schematic click on the Brochure tab.

This is the Boom Lift Cylinder for the Century 614 Series light duty wreckers by Miller Industries. This cylinder has a 5" bore. This cylinder connects to the wrecker frame weldment and the outer wrecker boom weldment. This cylinder lifts the boom up and down on your wrecker. It can also be referred to as the elevation cylinder. To see which specific models this lift cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

These Fender Flares from Phoenix USA for a Chevron (1994 - 1996) body will add a custom look to your wrecker. They will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).

This is the Wheel Lift Tilt Cylinder Upper Pin for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the hydraulic hose tube weldment on the Century 311/312 by Miller Industries. See Brochures for a reference chart.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

This is a hydraulic boom lift cylinder for Century EB4 Wreckers. This cylinder will fit both the Century EB4 Express and the Century EB4 6500. To view specific models see Features below. To view part schematics click the Brochures tab.

This is the Wheel Lift Tilt Cylinder for the I-600 Wheel Lift on the Challenger 4800 Series light duty wreckers by Miller Industries. This cylinder has a 5.5" bore. This cylinder attaches to the link weldment and the wheel lift outer boom and allows the wheel lift to tilt up and down. To view the part schematic click on the Brochure tab.