Light Duty Wrecker Parts

This is the Wrecker Boom Lift Cylinder Pin for the Holmes HP 552 light duty wrecker by Miller Industries. This pin goes through the base end of the lift cylinder. This pin is used to connect the boom lift cylinder to the wrecker subframe weldment. To view the part schematic click on the Brochure tab.

This is the Wheel Lift Extend Cylinder for the Vulcan 805 light duty wrecker by Miller Industries. This cylinder attaches to the wheel lift outer and inner booms. This is the cylinder that extends the wheel lift in and out on your wrecker. To view the part schematic click on the Brochure tab.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

This is the Wheel Lift Fold Cylinder Lower Pin for Century Modular Midnight Express light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 880 / 890 Series light duty wrecker by Miller Industries. This pin has a 1-1/4" diameter and a length of 6-5/8". This pin is used to secure the boom extend cylinder to the outer wrecker boom weldment. To view the part schematic click on the Brochure tab.

This 2.5" Fender Flares from Phoenix USA for a Vulcan 892 (1998 - Current) body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each (One Right Rear).

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is a 5-control handle mounting plate on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is the Wheel Lift Tilt Cylinder on the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift up and down on your wrecker. This cylinder attaches to the wrecker subframe and to the wheel lift tilt column. To view the part schematic click on the Brochure tab.

This is a Seal Kit for the Wheel Lift Cylinder on the Century 614 FIIT Aluminum Body, the Century 614 Formula IIT and the Century 712 & 716 Formula IIIT light duty wreckers by Miller Industries. This seal kit will replace the seals on cylinder part number 12-0307117. To see specific models this seal kit will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Boom Lift Cylinder for the Century 712 & 716 Series light duty wreckers with a Formula IIIT wheel lift. This cylinder connects to the wrecker frame weldment and the outer wrecker boom weldment. This cylinder lifts the boom up and down on your wrecker. This cylinder can also be referred to as the boom elevation cylinder. To view the part schematic click on the Brochure tab.

This Side Marker Light is Amber in color and for Holmes Protect style bodies. The dimensions of this light are 2 3/4" x 2 5/16".

Miller Industries provides a replacement keeper plate with a lower fold cylinder.

This is the Wheel Lift Extend Cylinder Pin for the extend cylinder on the Century EB4 Express and Century Modular Midnight Express by Miller Industries. To view part schematics click on the Brochures tab.

This is the Wrecker Boom Extend Cylinder Pin for the Century 614 Series light duty wrecker with a Formula II wheel lift. This pin goes through the base end of the extend cylinder. This pin connects the boom extend cylinder to the outer wrecker boom weldment. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the hydraulic hose tension track cover on the Century 300 Express, EB4 Express, and Challenger 4300 Express Series by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this fits.

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the base end of the extend cylinder. This pin connects the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

hhis 2.5" Fiberglass Fender Flare from Phoenix USA for a Chevron (1994 - 1996) body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the vehicle that you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each.

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Lift Cylinder Upper Pin on the Century 614 Series light duty wreckers with Formula II wheel lifts by Miller Industries. This pin goes through the base end of the lift cylinder. This is the pin that connects the lift cylinder to the wheel lift's frame weldment. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This 2.5" Fender Flares from Phoenix USA for a Vulcan 892 (1998 - Current) body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each (One Left Rear).