Toolbox Repair Parts

Phoenix T-Handle Latch with a Stainless Steel Finish. Latch is Flush Mounted with a Right Hand Mounting Application. This Latch is Supplied with 2 Keys.

This is a standard size 2 point T-Handle latch with mounting holes by Buyer's Products. This latch features 2 point construction and includes rods that make this latch a great option for long doors. This is a flush mounted latch that offers a smooth, perfessional look. It is corrosion resistant with mounting holes to make installation quick and easy.

This is a universal lock cylinder and key CH501 from Allegis Corp.

Note: Special Handling Fees Apply

This is a Buyers hinge, it is stainless steel. Comes in 6' length only.

• This stainless steel hinge is sold per 6' piece.
• Product Dimensions: 72"L x 1.25"H x .35"H

This Cylinder and Key is from Buyers Products. It is a 39 Cylinder and a LL71 Key, they are both included in this order.

Ensure that the door on your truck's storage compartment doesn't open too far and prevent it from swinging back at you or falling down with a door check from Austin Hardware. This mechanism works great on utility bodies, and the spring tension adjusts from 15 to 30 lbs. to hold a variety of door sizes and weights.

This is a latch lock clip works with (TM700).

This Replacement Key from Buyers Products is for the Buyers Cylinder

This Stainless Steel Paddle Latch for Jerr-Dan toolboxes holds up well to the elements.

Buyers Products Standard Size Flush Mount Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 3-3/8 in. by 4-5/8 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Buyers Products Tall Flush Mount T-Handle Latch with Blind Studs comes with a lock and key set installed, and gasket. The latch is constructed from stainless steel for durability and corrosion-resistance, and features a durable, folding T-handle. Blind studs, included gasket, and flush-mount design provide for a water-tight installation. The cam can adjusts from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The latch is shaped and sized to accommodate tall T-handle cut-outs, and many Buyers Products rotary paddle latch cut outs.

Buyers Product Standard Size Flush Mount T-Handle Latch with Blind Studs comes with a lock and key set installed, and gasket. The latch is constructed from stainless steel for durability and corrosion-resistance. Blind studs, included gasket, and flush-mount design provide for a water-tight installation. The cam can adjust from 1-1/4 in. to 2 in to accommodate varying door thicknesses. The latch is shaped and sized to accommodate most common cut-outs.

This is a In The Ditch stainless steel replacement toolbox door panel.

Includes cylinder with dust cover, key, straight cam, and clip.

This replacement Latch from Hanson is typically used on Century Heavy Duty Wreckers. It is made from aluminum and has a lock over striker pin. The latch is lockable with the provided key. ***New style lighted handle***

This is a Locking Cylinder nut works with (TM700).

Buyers Products Junior Flush Mount Rectangular Non-Locking Paddle Latch is a single point latch built to handle the demands of daily use. The non-locking, rectangular latch is designed to mount into a 2-3/4 in. by 3-3/4 in. recess and is available in rust-resistant steel (welded on) or stainless steel (bolted on).

Mount this Grab Pull Handle anywhere on your truck or trailer where an extra handhold is needed. Comes with four pre-drilled holes to accept 1/4"-dia. nuts and bolts (not included). 13"L x 1/2" dia. with a 7"L x 1-9/16"D grab s

This Replacement Lock Cylinder with Key from Buyers Products fits standard and junior sized latches. The cylinder is designed to fit flush with the latch and comes with two keys.

This 1/8" Gas Strut from Miller Industries is rated for 90 PSI. Gas Struts making lowering, lifting, moving and adjusting easier and safer. This strut is used on the toolbox assembly of Vulcan Wreckers. Please see the features below for a list of wreckers, and see the brochure tab for breakdowns.

Buyers Products Replacement Poly Underbody Flush Mount T-Handle Latch has four mounting studs to mount flush with the surface for a smooth and professional finish. The 3-point latch is constructed from polished stainless steel for maximum corrosion resistance. The roller cam adjusts from .25 in. to 1.6 in. to accommodate varying door thickness. The latch is designed to work on Buyers Products polymer underbody truck boxes and will not work with other truck boxes.

Return the T-latch on your truck's storage box back to its original watertight condition with this replacement rubber gasket from Austin Hardware and Supply. The rubber gasket seals out moisture for Austin Flush T-Latches.

Keep the working parts of the D-latch door handle on your truck's storage box free from moisture with this replacement foam gasket from Miller Industries.

Standard Paddle Latches are 4-1/4"W x 5-1/2"H and mount in a 3-3/8"W x 4-5/8"H recess. Junior Paddle Latches are 3-5/8"W x 4-3/4"H and mount in a 2-3/4"W x 3-3/4"H recess. BL9000 T-Handle Latch is 5-3/4"W x 6"H. TH800 T-Handle Latch is 4-3/4"W x 4-7/8"H x 2-1/8"D. BL8816 T-Handle Latch is 4-3/4"W x 5-1/2"H and mounts in a 3-3/4"W x 4"H recess opening.