Towing Accessories

The 3 1/4" Short Fork has one side shorter allowing the fork to slide under low axles. The fork has a low profile type designed to slide under the low bumper and engage the axle with the longer finger.

This is a spring fork from Bro Wreckers. The self aligning spring fork is one of the most popular forks and it attaches to the spring itself. Four different positions for the fork lock pin ensures a snug fit. The fork hinging feature permits alignment with the spring during lift. The spring hangers are always located up front or close to the bumper. This will decrease the load on the tow truck's axle. The closer you can pull in the towed vehicle the less weight you will have on your rear axles.

Trimloc rubber edge trim seal 1/8" x 5/8" x 9/16". Use around truck cabs, RV doors, lids, golf carts, garage doors, tractors, ATV fenders, fiberglass, sheet metal and more. It prevents leaks, gaps and vibration. The flexible PVC trim with a metal clip inside provides a permanent grip.

An ideal in-cab reference for helping drivers improve their compliance scores.

Complete set of gaskets for the 10 piece Motorcoach Axle Cap set.

Gives your employees vital safety advice on 25 of OSHA's hottest topics. Reviews key worker safety and health topics. Identifies common workplace hazards to help prevent accidents and injuries. Includes chapter quizzes to test employee understanding of topics, and a removable employee receipt page for easy documentation.

Reach Extenders provide 12" of additional reach to the Zacklift, very effective in getting around rear axle housing and awkward steering boxes. Also works great for getting around Detroit oil pans. This part can be used to replace Part Number 10-1009X.

This is a 12" X 1" motorcycle strap from Liftall Company.

Saunders recycled aluminum A-Holder form holder is durable, compact, and lightweight. This product is perfect for medical professionals, law enforcement, delivery drivers or anyone needing to avoid the unintentional release of information. Hinged writing plate prevents write-throughs and acts as a privacy cover to conceal documents. Top-open design allows for easy access to 3/8 storage compartment.

This 5th Wheel Head Pin is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

The Tiger Tool intermediate U-joint puller provides ultimate brute strength for disassembling even the most seized U-joints in minutes on virtually all intermediate trucks, school buses, farm and light industrial vehicles. With this tool you can eliminate dangerous vice and socket or hammering methods. It does not damage the driveshaft, yokes, joints or bearing cups. It is a one piece unit that does not require any bolts, cables to assembly. This U-Joint puller is for drive lines 1500 series and under.

Avoid the struggle of dragging heavy steel ramps into position to help your front end clear your lift or platform! Instead, reach for a lightweight set of our 36-inch or 48-inch long hook-nose Rack Ramps. The 36" have a 8-degree approach angle and the 48" has a a 6.4-degree approach angle and come with a 3-inch hook. The 14-inch width works with tires up to 12 inches wide. Each rack ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. They provide 5 inches of lift height.

These kits are Stainless Steel Door Trim Kits from Miller desighed for Vulcans.

The 4" bus and tube fork is designed to lift at the 4" torsion tube on the newer MCI and other buses. This fork is also used to lift trucks with tail gate lifts.

Century owner's manual for Formula 6500 - 600 series wreckers. It contains installation, operation, maintenance and parts information.

End Cap with chain hook for 6" x 4" crossbar.

Medium Duty Truck Hitch with 4 Rubber Rings. 8,000 lbs. capacity & 28" arms.

This HOS Handbook reviews the latest rules established to reduce highway accidents by keeping fatigued drivers off the road. It offers critical information on the following Hours of Service topics: Logging Compliance, Safety, Accountability (CSA) Roadside Inspections, Industry- and Location-Specific Rules

This 5th Wheel Head is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

This unique Bus Fork was specifically designed with a 2-1/2" dia. to fit the torsion bar on the front of a motor coach. It provides a snug fit to the bar without denting or crimping it.

These tall forks give you plenty of clearance between your crossbar and the bottom of the fork trough so you can access engines with deep oil pans.

Phoenix Chrome Plated Steel Grab Handle.

This is a plunger pin kit for a 12-1228 sling.