Towing Accessories

The 8" stinger-to-trough clearance allows you to avoid air bags and low-mounted light brackets for an easy lift.

This unique Bus Fork was specifically designed with a 2-1/2" dia. to fit the torsion bar on the front of a motor coach. It provides a snug fit to the bar without denting or crimping it.

The Universal E-Track Adapter Kit (UNIV-E TRACK) is designed to be used with either a CONDOR Pit-Stop/Trailer-Stop, (PS-1500) the CONDOR Trailer-Only model (SC-2000), the CONDOR Scooter Chock (SCC-4000) and the CONDOR Chopper Chock (CHCK-1500). (**All Chocks sold Separately)

Heavy trailers can cause quite a bit of problems. When moving them short distances, like onto an industrial trailer or car carrier, or allowing them to sit in the mud for long periods of time, you have to be careful with them. Thanks to the ITI HD Trailer Skate, that's no longer a major issue. This massive, two-piece skate has a 9”x9” recess that's perfect to accept trailer jacks or pedestal legs for short, yet safe passage along different paths.

This riser bracket is for a 5" by 5" crossbar used on a Century 7035 and 9055. It accept most 2" diameter forks and are used when extra height is needed for towing.

This Tailboard Dress Up Kit from Miller Industries can be used on Vulcan V-70 and V-100 trucks.

Secure motorcycles to your carrier with this six-foot polyster ratchet strap from Lift-All.

ITI Skate Around is a general purpose skate that can be used to move vehicles, equipment, furniture and anything you can imagine. It s low-profile design gives you the versatility to fit in tighter spaces. The slick surface of the skate makes moving objects easy!

Our Trailer-Only Chock (SC-2000 - Zip's Part # CP-SC) comes with this mounting kit, consisting of 2 steel plates and the hardware to attach it to your trailer platform, or table top lift. But if you need an EXTRA kit so you can mount the Trailer-Only Chock in a different spot on your trailer, or to transfer the chock to a different trailer or lift table, you can order this kit separately.

The all around manual for Vulcan 10 Series Aluminum & Steel Car Carriers. This manual includes installation guides, operation guides, and how to maintain your carrier. The manual also has a section on all of the parts that make up the carrier, so if you have a problem you can easily find the replacement part.

Locking spring forks cast from high strength steel, these rugged forks pin over the spring shackle for an alternate hook-up location. The fully pivoting load point allows for the necessary range of motion of the vehicle in tow for safe, non-binding transporting.

Motorcycle attachment for the Chevron 408VT Integrated Wrecker. This attachment allows for the safe and proper securement of motorcycles utilizing the stinger of the wheel lift. Only compatible with the Chevron 408VT with the Auto-Grip Self-Loading wheel lift.

This Riser Bracket is standard on all rotators and optional of all other models. This riser bracket fits on a 4" crossbar. Sold as pair.

Note: Special Handling Fees Apply   Please Note: Product Discontinued - ALL SALES FINAL!
Discontinued items are not eligible for return. View Returns Policy  

Keep the axles for your tow dollies protected and out of the way so they don't get damaged by installing this welded steel axle mount inside your wrecker's crossover tunnel box. This powder-coated rack bolts to the top of your tunnel to preserve valuable floor space inside your toolbox. The mount locks the axles in place to prevent shifting and sliding during transit. Besides the axles, the rack also holds a dolly's breakover bar for easy access once those components are needed.

• Holds two axles, one breakover bar
• Bolts inside tunnel box at top
• Welded construction
• Powder-coated black
• Easy access to equipment
• Components stay locked down
• Prevents shifting during transit
• Dimensions: 64" L x 10" W x 2 1/2" H
• Mounting Point to mounting point: 8 1/2"
• Size of holes 3/4"

Wireless remote control with 2 functions. Push buttons with emergency stop. Includes handheld remote, receiver with wiring harness and glands, lanyard and cover.

These Forks are designed specifically for the new Hendrickson Airtek/Steertek front axle. Special care must be taken when you are lifting the air suspension hollow beam front axles that are currently being used on many of the Volvo VNT and Freightliner Century Series Tractors. These special forks have a 5" wide opening and are 5" tall.

Buyers Products Vehicle Document Holder is constructed from sturdy, corrosion-resistant stainless steel and provides a secure and dry place for shipping manifests and other papers. Ideal for tractor trailer applications, the document holder has rubber caps on both ends to provide a tight seal.

This Main In / Out Tube Locking Pin is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

This part is a replacement for the small ramp that goes on the leading edge of either the Cycle Loader or the Self Loader device, to make loading the motorcycle onto the unit easy.

This King Pin Retaining Bar is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

The industry's leading wheel lift that can handle dump trucks to mid sized SUV's. No bars to change, no ratchets to connect. Straps remain connected to strap-winch for ultra convenient winding. Wheel trays provide secure support for tires from 15" to 24.5". Easily handle luxury coaches with the low profile, damage-free wheel-lift. Wheel lifting assembly can remain in place during storage for simple re-use. Powder coated paint for long life and quality appearance. Lift rating is 18,000 lbs. The assembly comes complete as shown below. The assembly includes 4" tie down straps and winches. This part can be used to replace Part Number Z10-1027X.

This Kenworth Dummy Stack is from Miller Industries. Mounts on Top of D.P.F.

This is a Buyers hitch, combo pintle/ball with a 2" chrome ball. Buyers Products 8 Ton Combination Hitch combines both a ball hitch and pintle hook into one product. It allows you to pull loads that have either a coupler or a drawbar/pintle ring without having to change hitches. The hitch is ideal for contractors, tradesmen and haulers who tow a range of construction equipment.

The All-Grip Motorcycle Sling Kit comes with everything you need to haul a motorcycle. It comes with a 4” nylon sling, a 6” nylon sling and two endless ratchet straps. Plus, they are nylon, so the kit will last.

This spade attachment from Miller Industries is a great tool when recovering a vehicle using your car carrier rollback. This anchor spade was designed specifically for use on the 6" x 4" Dock Stabilizer Tube on a 20 or 40 series Miller car carrier rollback.