Towing Accessories

This replacement Curved Axle Fork Set from Miller Industries features a short front lead fork to easily fit under an axle. The rounded inner design fits nicely around the axle.

This Buyers Products weld-on latch is designed for 90° engagle application. The spring loaded mechanism can be locked in the open position; turn to put the spring in the closed position. This is a 5/8" weld on spring latch assembly in a heat-treated steel tube. It measures 2.53" x 4.68" with a .62" bolt width.

These Low Profile Fork Holders are designed to fit a 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products . This fork holder set includes the right and left hand sides.

This Stainless Steel Cylinder Wrap Kit from Miller Industries is to be used on Century 9055 and 1140 trucks. The kit will include enough products to do up to 2 cylinder wraps.

This offset rear axle fork from Zacklift., no slip positioning of frames, axles, and crossmemebers. It is 6" across from the top of the shorter fork and has a 2" diameter shaft that fits most popular fork receivers. This part can be used to replace Part Number 10-7763S and Part Number Z1304-6X6.5-C.

These stainless steel screws are used with 7/8" stanchions. They measure 10/32" x 3/4", which is the correct size for low-profile handrail stanchions. These screws will maintain a clear, rust free appearance.

Safety label reminds drivers they may not dial, text or use hand-held cell phones. Reinforces regulations 49 CFR 383.51, 392.80 and 392.82 mandatory January 3, 2012.

Saunders aluminum Citation Holder II Form Holder is ideal for industrial, transportation, medical, public safety, government office professionals. Lightweight and durable recycled aluminum stands up to daily wear and tear. High tension clip/ID holder and 'hook and loop' strap holds documents in place. Hinged writing plate prevents write-throughs and acts as a privacy cover to conceal documents. Top-opening design allows for easy access to 1" storage compartment.

Our Aluminum Storage Clipboard is full of features essential for contractors and mobile professionals. Featuring a bottom compartment for storage as well as a built-in pencil and pen tray. Robustly designed to be durable and lightweight while providing a smooth writing surface with a high capacity clip. Designed with the user in mind the clipboard also features a built-in license and card holder and holds letter sized paper.

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your Vulcan 892 light duty wrecker. These storage brackets include 2 pieces, enough to hold 2 dolly axles on your wrecker.

This stainless steel Trim Cover, from Miller Industries, is for each end of the H-Beam Outriggers. This will work with the present outriggers witht he horseshoe on the outside.

As Markal's most versatile and economic marker, the original B Paintstik solid paint marker combines the durability of paint in the convenience of a crayon. The real paint formula has superior marking performance on oily, icy, wet, dry or cold surfaces and is weather- and UV-resistant. This Paintstik works on rough, rusty, smooth, or dirty surfaces. Sold in a pack of 12.

Only 1" high and 2.5 inches across at the base. Works great on front axles and low clearance applications.

Make room in your car carrier toolbox for this Rollback Master Kit from ITI. ITI skates are known for their durability and reliability when it comes moving locked or disabled vehicles. This kit features a set of four automotive skates for use with most passenger vehicles, and a pair of Big & Tall Skates and a pair of XL Big & Tall Skates for those larger tires found on pickups and SUVs. The kit also includes a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Lastly, the ITI Rollback Master Kit comes with a Trailer Jack Skate for moving trailers or protecting receiver hitches and a Lockout Wedge for use with door tools. Save over buying these products individually.

The Zip's Storage and Charging Console is a great addition to your rollback car carrier, light duty or medium duty wrecker. This convenient console mounts to the floor of the cab and stores your essential towing and roadside assistance tools within easy reach - all while keeping them charged!

Tim-Lok's flap seal is a flexible PVC trim with an EPDM sponge rubber flap attachd to provide a secure seal in a variety of dynamic applications.

Replacement wheels and brakes for Cycle Loader MTR8.

The experts at AW Direct have put together this Standard tow kit so you'll be ready to handle your next heavy-duty front tow. This basic package includes the Quick Connect air coupler kit to supply air to brake and suspension components on the disabled truck as well as the SafeAll Brake Assist to help with braking while going down the road. Lastly, this tow kit features a pair of tie-down straps to secure the front axle to the underlift and a cam-style steering wheel lock to prevent the front wheels from shifting while under tow. See below for kit components and individual part numbers.

Save on the two most popular sizes of GUNIWHEELs when you purchase this (4) wheel kit from Zip's AW Direct. The GUNIWHEEL Combo Pack includes (2) GUNIWHEEL45S and (2) GUNIWHEEL56 universal replacement wheels. With a deeper offset and thicker center, the recently improved GUNIWHEEL 45S is designed for use on cars and small SUVs with four and five bolt lug patterns. Similarly, the GUNIWHEEL56 is designed for use on larger SUVs and pickup trucks with five and six bolt lug patterns.

The Medium Axle Fork is used on spring, axle, cross member or frame lifts. This fork provides 6-1/2" of clearance between your cross bar and the bottom of the fork trough. 2" dia. x 4"H shaft.

This Dolly Support Arm is a handy accessory for the ITD-MODULAR-MOUNTS by In the Ditch. Now you can have the choice of mounting your dolly axle parallel with the wrecker deck if you want. This support arm comes painted Tuff Coat Black and is made in the USA.

When you come across a wreck, you should be able to get that car where it needs to be, even when all you have is a wrecker. If you're on the interstate, this can be difficult as not many dollies aren't capable of handling interstate travel. Lucky for you, Collins has the Pro Line Hi-Speed Dolly to help you.

Miller Industries 6,000 Lb. Tire Lift System To Fit a 4" x 4" Crossbar. Fits 1624, CH20, 4024 Wrecker Models.

Aluminum Dress Up Kit (Tailgate Only) for the Body of a 7035, 9055. Includes Left Tailgate Panel, Right Tailgate Panel, and Tower Panel.