Towing Accessories

Ever wished you had that perfect grab handle in the right location. Wish no more, In the Ditch has come up with a grab handle that can be mounted anywhere you want it. It is designed to work with bare hands or gloved hands because we know users come in all sizes and work in all kinds of weather. These grab handles are made from aircraft grade aluminum and incorporates a solid billet aluminum handle that will last for generations. Also included with this handle are stainless steel fasteners. This handle is rated for 300 lbs., but that is limited to the surface that you are mounting this handle to. This grab handle is made to be mounted to a flat surface.

Note: Special Handling Fees Apply

Aluminum tread plate trim rock protection for 5130 tail board and rear of boom. Easy to install using 3M double sided tape.

• Aluminum Diamond Plate
• Cut to fit

Perfect for use with trailers, as well as around a garage or workshop, this sturdy lightweight Trailer Steps will give you just the lift you need. In addition to being a helpful step up outside or inside trailers, it can also be used for an extra boost while washing and detailing, or as a handy bench while you service your car on our Race Ramps or wheel cribs.

Zip's Custom dolly tray for car carrier. This dolly tray is for 5.70 dollies. This custom dolly tray allows you to store your dollies out of the way while still being able to have easy access to the dollies.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold separately.

This Main Body is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

This is a Spring Shackle Adapter from Miller Industries.

Put safety first with this 12-inch Racer Chock. It has texture across the entire width for the ultimate grip on your tire, ensuring that both the chock and the tire will not move. At only 2 pounds, it is light enough to easily move and reposition, and it can hold up to 1,500 pounds.

The Trailer Side Kick is helpful both for parking your vehicle inside your trailer and for changing a trailer tire. For parking inside a trailer, the Side Kick fits in front of a trailer's wheel wells to provide a tapered, protective guide between your vehicle's wheels and the trailer's steel wheel wells. For changing a trailer tire, simply drive the good tire onto the ramp and the flat tire will be lifted off of the ground for easy removal and replacement. The Side Kick can be used on any level surface without sinking, even grass, or even sand.

You're pulling your collector's car out of storage for the first time this year and see flat spots on your tires once again. You sigh, knowing that you can expect a bumpy ride for a while or that you'll have to replace them if those spots won't go away. Don't let that happen again! FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28-inch long FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots.

There's an easier, safer way to load a semi or truck onto a wrecker. No need to risk double picking a vehicle when it's disabled as you could just use the ITI Heavy Duty Ramp Stand. All you have to do is winch the vehicle onto the ramp stand which lifts it up 2.75". This extra height allows you to easily get the forks underneath the axle. Alternatively, you can drive the vehicle onto the ramp stand, although it's not the preferred method.

The narrow profile of the GUNIWHEEL makes this universal replacement wheel easy to store just about anywhere. A set of four can be neatly stacked in the corner of a shop when they're not in use, or if you desire less lifting and more maneuverability, consider this GUNIWHEEL storage cart from Zip's AW Direct.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

Please call for custom faceplate options. All default faceplates on 6+ function transmitters will be numbered.

AC9604 Specifications

• Functions: 4
• 25 ft Cord
• Manufacturer Part Number: AC9604
• UPC: 745444006576

AC9606 Specifications

• Functions: 6
• 25 ft Curly Cable
• Manufacturer Part Number: AC9606
• UPC: 745444006576

AC910 Specifications

• Function: 10
• 25 ft Cord
• Manufacturer Part Number: AC9610
• UPC: 745444006606

Stainless Steel Screws for 1 1/4" stanchions. This part can be used to replace Part Number, 114-SS.

The next time you reach for your racing scales, hold back on the jack and instead reach for this set of four or set of two Scale Ramps. They will save you time setting up, and provide 2.5 inches of height to get your car ready for positioning on your racing scales. Each scale ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 8.7-degree approach angle allows low-profile cars to easily mount onto your scales. They are ideal for track days, auto shops or personal garages as they can be moved and transported with ease.

Lodar clear cover for 2,4,6 function standard Lodar transmitters.

This fire retardant trim from Lavanture Products Co. is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a thermoplastic Vulcanizate (TPV) material formulated to pas the National Fire Protection Agency (NFPA) standards. This material also complies with the UL 94HB flame requirements most commonly needed in electrical enclosure applications.

Our set of two-piece 80-inch Combo Ramps are the "triple header" of ramps! Use them as service ramps in the garage, trailer ramps when loading, or remove the ramp portion and use them as wheel cribs for display or service. They have an 8.5-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds yet each ramp only weighs 22 pounds.

This Tow Sling has a 3,500-lb. lift and a 7,500-lb. tow rating and is ideal for towing cars, light trucks and small vans. Critical wear spots have been manufactured to hold up to the constant pounding associated with towing. Sling straps are fastened with carriage bolts, for easy replacement. Spacer arm release pull grips are located on the inside of the arms and toward the back of the truck for easy access and extra damage protection. Includes two anchor shackles, cast mounting brackets and all necessary hardware. Designed to work on most popular one ton tow trucks. Straps measure 10"W x 47"L.

This zinc-plated steel replacement pivot pin is used to connect various attachments to Zip's HD Underreach Towing Adapter, including the fifth wheel plate adapter, kingpin adapter and gooseneck ball adapter. The 2" pin includes a stop lip to prevent the pin from spinning on one end and a hole for the spring retainer clip on the other. This pin ensures attachments are secure and functioning properly.

Designed to be used with our 56- or 67-inch XT Race Ramps, this pair of Roll-Ups Ramps provide that extra bit of boost to give low profile cars extra clearance for maintenance. Roll-Ups are perfect for raising up the front or rear of your car up 4 inches, which is enough to slide in most standard floor jacks. At 14 inches, they can be used with tires up to 12 inches wide, and each ramp can support by to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. These ramps only weigh 4 pounds apiece, making them light and small enough to fit in the trunk of your C5 or C6 Corvette, or bring along to track day.

Zacklift HD wheel lift 4" strap winches available in a set, drivers, or passanger side.

Keep the axles for your tow dollies protected and out of the way so they don't get damaged by installing this welded steel axle mount inside your wrecker's crossover tunnel box. This powder-coated rack bolts to the top of your tunnel to preserve valuable floor space inside your toolbox. The mount locks the axles in place to prevent shifting and sliding during transit. Besides the axles, the rack also holds a dolly's breakover bar for easy access once those components are needed.