Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold separately.
This Medium Duty Truck Hitch from Miller Industries has superior strength and durability. This might be the best tow bar design ever because it incorporates the use of extra-large spacer bars, a smooth faced crossbar and cam locks on the spacer bars for easier use. The crossbar comes with 1/2" grab hooks at the end for extra heavy duty lifting, and 3/4" shackles for attaching your winch cable to. Mounting brackets sold separately.
When you can't find the right fork try our versatile 9" tall fork and use the chassis frame as lifting point as shown in the illustration. Here, one finger of the fork enters a hole in the cross member and prevents the towed vehicle from sliding. Attach your safety chains accordingly.
These 14" Xtender Ramp extensions are designed to work with our 67-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars. These 12" Xtender Ramp extensions are designed to work with our 56-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars.They are a handy resource for garages and auto shops that work with multiple makes and models, or for the home enthusiast who might just need a slightly gentler incline to accommodate a new car, or a modded car with a lip or splitter. The 14" can accommodate tires up to 12 inches and only weigh 10 pounds apiece. The 12" can accommodate tires up to 10 inches, and only weigh 10 pounds apiece. Once your car is parked at the top of your ramps, the extensions can be removed for additional work space - just remember to put them back before you drive down!
Trailer Mates eliminate the hassle and stress of getting your low profile, track car or sportscar safely tied down in your trailer without scraping the front bumper. Trailer Mates add 3 inches of ground clearance so that you have more room to reach your vehicle's tie-down points, and in some cases, open the door over the trailer wheel well.
Heavy-duty tow operators seeking to increase traction on sidepull recoveries can purchase this newly-designed spade attachment for the H-beam outriggers on their Century rotators. Improving on the old style, engineers at Miller Industries have created more downward pressure and reduced weight by eliminating angle bracing and adopting a more vertical application for this user-friendly accessory.
"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately. This unit is made special to run the SP8000 side puller. It has a special function that limits the use of the jack legs. You have to hold two buttons simultainiously to use either of the jack legs. This helps prevent the legs from accidentally being used during a recovery.
"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.
"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly to the electrical plug of the existing hydraulic control valve and does not alter your hydraulic system. This system is specific for the Century and Vulcan auto load Midnight Express and 810/812 wrecker. Lifetime warranty on the electronic radio system.
The 5th Wheel Plate Adapter accept kingpins from RV & horse trailers as well as commercial trailers. Will fit most cross bars with 2" receivers. The 2 tow ball is standard, easy exchanged to a 2 5/16 tow ball allow goose neck trailers to be towed.
Full color, laminated vinyl issued by DOT to assist with placard/label identification and compliance. Perfect for driver training and shipping reference. Includes a brief explanation of each regulatory area.
Show Ramps are a quick, easy way to improve your vehicle display at a show. These double incline ramps can be used to raise up the front, back, or side of the car; or get two sets and raise up the entire body! They are a great lightweight alternative to jack stands, floor jacks, and wooden blocks. Paired with an accessory like a show mirror, they make for an impressive display that is easy to set up and transport.
This Towbar from Miller Industries comes complete with mounting hardware. This medium duty towbar will fit a Century Formula I and 6500. It is designed to pin into the tailboard on a Formula I or 6500 body in the existing tow sling brackets. It comes complete with hookup chains and rubber doughnuts on the crossbar to help eliminate damage.
This bolt-on under-mount bracket is specifically designed to store Miller's outrigger spade attachment on Century rotators. The steel bracket can mount near the outriggers so it's readily available when heavy-duty operators are seeking additional traction on side load recovers. Installing it under the body prevents damage from other equipment and tools and also preserves valuable storage space inside toolboxes. The bracket is powder-coated black to guard against road spray and premature corrosion.
Towing a truck or bus often means pulling the drive axles. And a lack of oil can result in burnt bearings, scorched hubs and melted seals. These Axle Caps are equipped with an oil-access hole for adding oil to the hub prior to towing to prevent damage. Caps feature an oil-access hole that allows you to add oil to the hub prs the most commonly used medium- and large-sized covers.