Towing Accessories

Lodar Actus Electric Actuator for Hydraulic Valves. Kit Comes with a Lodar 4 Function Remote, Lodar Receiver, and an Actus Linear Actuator. For Example: This system will work with a 2 winch system IN/OUT Functions like a car carrier equipped with a Sidupuller. No Air Required. 12V power source and ground are needed for insallation. Great when using a Ford F350/F450/F550 or Dodge 3500/4500/5500 Chassis since there are no on-board OEM air compressors available. *NOTE: Is NOT compatible with any small wrecker with "cable" operated controls.

If you are looking to add style and beauty to your truck, you'll turn heads with this grille.

The Tiger Tool thrust washer is a replacement part to ensure long life, reliability and warranty coverage for your

The Tiger Tool retaining bolt is a replacement part to ensure long life, reliability and warranty coverage for your

This is a replacement plastic pull handle for the drop down dolly box by In The Ditch.

This Cross Bar Adjustment Pad is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

Easily maintain, service or display your sports car with our set of two 30-inch Rally Ramps. We engineered these ramps to work with most small sports cars including stock Miatas, Subarus, Evos, BMWs and Triumph MGs. This set of two ramps fits tires up to 8 inches wide, and provides a full 5 inches of lift. They have a 16-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds, yet each ramp only weighs 4 pounds. The raised lip alerts the driver that they've reached the top of the ramps, and they come carrying straps for easy positioning.

This is a polished stainless steel dress-up kit for the SP20000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

Easily maintain, service or display your sports car with our 40-inch Sport Ramps. We engineered these ramps to work with lowered and short-nose vehicles such as stock Miatas, Subarus, Evos, BMWs, Triumphs MGs, Jaguars, C1-C3 Corvettes and more. This set of two ramps fits tires up to 8 inches wide, and provides a full 7 inches of lift. They have a 16.7-degree angle of approach and can hold up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds, yet each ramp only weighs 6 pounds. The raised lip alerts the driver that they ve reached the top of the ramps

You're pulling your collector's car out of storage for the first time this year and see flat spots on your tires once again. You sigh, knowing that you can expect a bumpy ride for a while or that you'll have to replace them if those spots won't go away. Don't let that happen again! FlatStoppers have been saving thousands of tires worldwide while they're stuck in winter or long-term storage and they are more affordable than the cost of replacing your tires. When you're parking your car for 30 days or more, simply drive onto our best-selling 28-inch long FlatStoppers and your tires will settle into the concave depression of the pads to evenly disperse the weight of the car across the increased contact patch and prevent flat spots.

This towel dispenser is commonly mounted on the tool compartment door of heavy duty trucks. It is available in a kit that also includes a foldup washdown sink.

Designed as an alignment stand, this set of two wheel stands can also be used for car display stands in showrooms or at shows. Each lightweight cube only weighs 13 pounds, yet can support up to 1,500 pounds per stand for a total vehicle weight capacity of 6,000 pounds. It provides 14 inches of lift height, and can accommodate tires up to 14 inches wide. These wheel stands are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight stand solution that is strong, yet durable. They won't slide on any surface, including smooth garage and workroom floors.

The Valve-Mate II 2-10 Function Wireless Hydraulic Controller is heavy duty and built to last a lifetime. Controls up to 8 Hydraulic Functions, such as Up and Down, In/Out, etc... this is the perfect wireless winch controller or full tow truck control! Operate your system at a safe distance... the possibilities are truly endless with the Valve-Mate II System.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

Lodar Replacement Air Actuator

This Tow Slings from Miller Industries are designed for specific applications. The Century 411 & 412 brand sling has 29-1/4" slide arms. These slings are supplied with all necessary hardware and sling chains.

This Motorcycle Attachment gives new versatility for the Century Midnight Express.

Additional Tailboard D-Rings for All Heavy Duties.

The DS Series is built for compact to full-sized automobiles, light trucks up to 1-ton in weight, and mobile equipment trailers (with or without brake backing plates or systems) that have standard sized tires and wheels. For most applications, the DS-12 will be sufficient. MITI Manufacturing s staff or distributors will be pleased to assist with your model selection to ensure the proper fit, function and security before ordering. If vehicles with 10 and smaller rims are to be immobilized, then the DS-10 will be the best option. 12 models are ideal for general use on most diameters of wheels. 14 domed wheel covers are ideal for large diameter wheels. Padlocks (sold separately) are recommended for all units except series which have a built-in locking mechanism. The standard color is orange.

Stainless Steel Mounting Screw for 7/8" Tubing Kit.

The Tiger Tool dome plug is a replacement part to ensure long life, reliability and warranty coverage for your

This folding washdown sink is designed to be mounted on the tool compartment door of heavy duty trucks. The washdown sink allows you to clean your hands after a hook up or recovery job. The sink is easily mounted and comes with a small heater that is connected to a toggle switch to keep the water from freezing in the winter. It is easily filled from the top with approximately 1 quart of water and is easily drained with a small hose that is connected to the base. The sink bowl folds up when not in use and is available in a kit that includes a paper tower dispenser.

Ever wished you had that perfect grab handle in the right location. Wish no more, In the Ditch has come up with a grab handle that can be mounted anywhere you want it. It is designed to work with bare hands or gloved hands because we know users come in all sizes and work in all kinds of weather. These grab handles are made from aircraft grade aluminum and incorporates a solid billet aluminum handle that will last for generations. Also included with this handle are stainless steel fasteners. This handle is rated for 300 lbs., but that is limited to the surface that you are mounting this handle to. This grab handle is made to be mounted to a curved surface.

Safer than jack stands and far more attractive, our multi-purpose Wheel Cribs are a stable, sleek alternative that offer greater maneuverability and versatility. Whether being used for fluid changes, general maintenance, detailing, or lifting up your vehicle at a show, these wheel cribs will truly be the talk of the town. Sold in pairs, each crib can hold up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds, and they support tire diameters 24 to 30 inches. They are also incredibly lightweight at 5-7 pounds per crib - perfect for taking with you to shows or moving around your shop.