Towing Accessories

Chain forks can be used in many ways. The chain fork lifts a completely wrecked truck - no axles or tires - and the under reach functions as a tow bar. The chain forks are milled from one high tensile steel bar and accept 1/2" to 5/8" chain. This helps get a truck lifted from the rear where no easily accessible lift point is available.

Step 1: Add the Road Service Form quantity to cart.

This Single Axle Rack was designed for those wanting to mount a dolly axle on each side of the truck. Each rack will hold a telescoping aluminum axle and break over bar. They are sold as a set, which contains two single axle racks and one thumb screw to hold down the break over bar. This In the Ditch's AUTO-LOX system, the axle easily fits in the mount and locks into place with just a twist. Mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

Zip's perforated vinyl window decals portray the "Slow Down Move Over" message in a visual way. The decals are perfect for outdoor use being durable and waterproof. They are not only a great decal for your vehicle but a portion of the proceeds will be donated to the Survivor Fund as well. These decals can be seen through from the inside of your cab while being seen clearly by anyone viewing your truck from the outside. The decals come in a variety of colors that are easily matched to your vehicle.

The GoJak 4500 Super Slick Dolly lifts and moves lighter weight exotic vehicles that have tires as wide as 20" and up to 36" tall. Twin rollers on each axle guide the tire smoothly up and over the axle support bar to lift wider tires. Features a bi-directional linear ratchet for the jack portion and a 5" offset pedal angle for additional foot-to-tire clearance.

Transport motorcycles without damage! This Wheel Lift Motorcycle Sling Kit utilizes two soft nylon straps, one for the front fork and one for the rear wheel which you attach to your winch cable. Next, there are two short take up ratchet straps for anchoring.

Note: Special Handling Fees Apply

This 5th Wheel Plate Adapter accepts kingpins from RV, horse trailers and commercial trailers. It will fit cross bars that have 2" receivers. The 2" tow ball comes standard, but it is easily exchanged to a 2-5/16" tow ball to allow goose neck trailers to be towed. This fifth wheel adapter will not work on Zacklifts. For a Zacklift unit, use part number Z10-1025X.

• Will fit kingpins from most 5th wheel trailers and commercial trailers
• 2" tow ball is standard
• Fits most 2" receivers
• Towing Capacity 25,000 lbs

Note: Special Handling Fees Apply

The life of a tow truck operator is a tough and dangerous one. Physically demanding, close to high-speed traffic, and never entirely sure what could go wrong. Every tow truck operator deserves as many conveniences as possible. This is why we made the Self-Loading Dolly Mount. This handy tool helps make their day a bit safer, a bit easier, and a bit better.

Able to load and unload dollies quickly and efficiently, you can rely on the Self-Loading Dolly Mount. This shock assisted mount allows the tow truck operator to load dollies from their power zone, the optimal lifting position for users that eliminates back and shoulder strain. Additionally, it eliminates side frame and truck bed damages from impacts with the dollies. To absorb these benefits, operation is a breeze. To pull the mount down, engage the release handle and gently pull back on the dolly. The dolly will float down to the operator with shock assistance. To mount or dismount the dolly, engage the cup latch on the tilt cup. This will open the tilt cup or lock the tilt cup into place. Lastly, pull the release handle and guide the mount back up as the shock assistance takes away all the lifting. For one last securing method, insert the latch pin to prevent the dolly side frame from falling in transit. It's that easy!

Additionally, it also protects tow truck operators and their equipment by preventing them from getting on the bed of the truck, especially trucks with high beds. No need to worry about slipping or falling off, as you can stay in one spot on the ground while it loads. Plus, like previously mentioned, its lock pin/latch mechanism prevents the dollies from falling down in transit, preventing damage to the side of your vehicle and the dollies. More importantly, it eliminates the chances of an accident caused by an unstable mount. By locking it in place, the tow truck operator can feel safe knowing it won’t cause any problems on the road.

Another great feature of the dolly mount is that it’s designed to fit most dollies. With it's adjustable wheel mount brackets for both 4.80 and 5.70 sized tires, this mount ensures you can easily integrate into your specific system. Plus, with how easy it is to use, it will speed up any job you’re on. Why wouldn’t you want this on your truck?

• Sold as a Pair
• Easy unloading, restowing, and mounting
• Steel construction
• Adjustable wheel mounting brackets to accommodate both 4.80 and 5.70 size tires
• Pull Down Mount: Engage release handle and pull back on dolly--dolly floats down to operator with shock assistance
• Dollies Off/On: Release cup latch to remove dolly from tilt cup or release and lock cup latch to mount dolly onto tilt cup
• Lift Up Mount: Pull release handle and guide dolly up with shock assistance
• Shock spring does all the heavy work (no more heavy lifting)
• Holds dollies on the bed of a truck
• Latch/pin/lock for securing
• Compatible with most dollies including In The Ditch and Collins
• There is a spacer that can be removed to accommodate the bigger tube on the ITD dollies
• Dolly retrievable in the power zone
• Compact set up
• Great for trucks with higher beds

The tunnel box mount is great for trucks with extra space inside of the tunnel box. This mount can be bolted or welded to the roof of the tunnel box and can be accessed from both sides.

The Eagle Fork-lift Attachment. Fast, damage free, car moving machine. Turns a forklift into a fast efficient yard truck! Move cars quickly from parking spots, within storage yards or salvage lots. All you need is a forklift. Just slide the forks into the receivers and you are ready to go. No hydraulics just a simple rotating mechanism which wraps around the car tires!

Powered by a 9V battery, this six-function handheld keypad works exclusively with SafeAll's Proportional Remote Control System (Item #: SA-RCS). The push-botton remote includes five standard controls for winch spooling, bed direction and wheel-lift operation. A sixth auxiliary row is available for optional accessories, like wheel-lift jaws or side-puller winches. This patent-pending system works with all types of carrier manufacturers, and the transmitter frequency will not interfere with wireless tow lights.

ITI has produced a yellow Signature Series of its popular line of skates to help tow operators identify them in low-light situations and, therefore, keep better control of them under a pull. They are made from the same durable material as ITI s traditional, earth-tone line of skates but offer greater visibility at night and better contrast against gravel and dirty road surfaces. To make sure you have the right skate for the job, ITI has assembled this line of yellow skates into a Rollback Essentials Kit. Included are a set of four automotive skates for use with most passenger vehicles. The kit also features a control arm skate suited for vehicles with wheel impairment or suspension issues as well as two extensions: one for additional clearance and another for trailer axles. Save over buying these skates individually.

This Integrated Speed Mount from In The Ditch is similar to the Speed Mount except it has an Integrated Mount that can hold a break over-bar and aluminum axle. Locking the axle, break over bar and Speed Dolly is all done with the built in Vice Action Lock. There is a reason this is a top seller, its ease of use keeping the dolly frame, axle and break over bar in one spot. Made from steel with a Tuff Coat Finish you will get years of dependable service. We also offer regular

This ITI Machinery Skate is designed specifically for moving equipment and other heavy machinery. These ITI Skates will drastically reduce the moving resistance allowing for easier placement of heavier equipment while protecting the floor. The low-profile design features a beveled cutout on the skate surface to cradle machinery legs, when needed. Flip this skate upside down and use it as a loading ramp to provide a tapered approach.

Saunders Redi-Rite recycled aluminum storage clipboard with high capacity clip is the ideal portable and durable work space. It is weather resistant and is perfect for public safety workers, law enforcement agents, EMTs, coast guard, coaches, inspectors, contractors, truck drivers, etc. This Portable Desk-Style Carrier accommodates letter-sized forms in the large 1-1/2"D pocket. Carrier opens from the bottom and includes a pen holder for added convenience. Made from aluminum for extra durability.

The unique key slot design in this steel plate captures trailer and tanker kingpins, making unsafe pin chaining unnecessary. Plate fits all trailer and tanker kingpins and includes two 1" screw pin anchor shackles for your tow chains.

Miller Industries newly redesigned and field-tested dual fork receiver set offers heavy-duty tow operators the advantage of four fork positions on their crossbars, allowing them to achieve the desired clearance and weight distribution on their underlifts during front-pick tows.

Buyers Products Poly-Coated Steel Hitch Pins have a durable powder-coated steel shank and highly visible blue poly-coated handle. Constructed from SAE AISI 1541 rated steel, hitch pins are a durable part in any application. Pins include a zinc-plated cotter pin.

Phoenix Center Stanchion for 7/8" or 1 1/4" diameter handrails.

This revolutionary Scotch Block from In The Ditch is made from lightweight, high strength alloy steel. No more having the chain atta ched to the scotch block. This was designed with a reinforced chain pocket so you can use your own chain. Scotch block measures 16" wide x 14" long and comes with a tuff coat black finish. Shop our other

Miller Industries End Cap Chain Adapter for 5"x 5" Crossbar. This is part of the standard attachments for Century and Vulcan Heavy Duty Wrecker Lines. Fits 25 - 75 Ton HD Wreckers.

Trimloc rubber edge trim seal 1/8" x 5/8" x 9/16". Use around truck cabs, RV doors, lids, golf carts, garage doors, tractors, ATV fenders, fiberglass, sheet metal and more. It prevents leaks, gaps and vibration. The flexible PVC trim with a metal clip inside provides a permanent grip.

Short Forks are used for lifting axles, springs, cross members or chassis frames. Fork features a 2"D x 4"H shaft, which fits any 2" dia. securement slot. Made from high-tensile steel.

Spindle Mount Brackets, Tall, for dollies with 5.70 tires. This part can be used to replace Part Number DM-SL5.

These In The Ditch Drop Down Dolly Boxes will save your back from heavy lifting off the deck. The drop down dolly box is weather resistant and protects your dollies from snow, ice and road debris. They are easy to use, just pull the aluminum tray out and tilt the tray down. The Standard Single Box was specifically designed to hold the Speed Dolly with 4.80 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. The XD Single Box was specifically designed to hold the XD Speed Dolly with 5.70 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. New composite bearings for the sliding/tilting tray were designed to last for years. We also offer a