Remote Control Systems & Accessories

Lodar replacement standard transmitter. Please call for custom faceplate options. All default faceplates on transmitters will be numbered. The 2 - 6 function remotes come standard with the AC9801 protective boot and lanyard.

Please call for custom faceplate options. All default faceplates on 6+ function transmitters will be numbered.

Lodar Actus Electric Actuator for Hydraulic Valves. Kit Comes with a Lodar 2-6 Function Remote, Lodar Receiver, and an Actus Linear Actuator(s). For Example: This system will work with a single winch IN/OUT Functions. No Air Required. 12V power and ground needed for installation. Great when using a Ford F350/F450/F550 or Dodge 3500/4500/5500 Chassis since there are no on-board OEM air compressors available. *NOTE: Is NOT compatible with any small wrecker with "cable" operated controls.

SafeAll's Proportional Remote Control System allows tow operators to control car carrier or industrial carrier functions with just a twist of the wrist. As the remote is rotated by hand, the selected actuator provides proportional lever action for a precise bed angle, wheel lift placement or desired winch speed. The proportional feature of the SafeAll remote system also provides the operator with the confidence to load or hook up the most luxury vehicles or specialty equipment, limiting the risk of causing damage. The feathered control functionality the SafeAll system provides is also much safer than competitive wireless remote systems, which have very jerky, on-off functionality.

Please call for custom faceplate options. All default faceplates on 6+function transmitters will be numbered.

This Lodar replacement air actuator is for the Lodar air actuator series wireless systems. The kit includes mounting brackets and air fittings.

Lodar replacement mini transmitter for 90/91 and TI Series Transmitters. Please verify the transmitter matches your reciever series before purchasing.

Lodar standard remote control wireless system. Please call for custom faceplate layouts on 6 function transmitter. Default faceplates will be number 1-6

Lodar fabric cover with zip and lanyard for Standard and IP Transmitters

Please call for custom faceplate options. All default faceplates on 6+ function transmitters will be numbered.

Lodar Antenna Assembly

Lodar Holder for Mini, Industrial, and IP Transmitters.

Powered by a 9V battery, this six-function handheld keypad works exclusively with SafeAll's Proportional Remote Control System (Item #: SA-RCS). The push-botton remote includes five standard controls for winch spooling, bed direction and wheel-lift operation. A sixth auxiliary row is available for optional accessories, like wheel-lift jaws or side-puller winches. This patent-pending system works with all types of carrier manufacturers, and the transmitter frequency will not interfere with wireless tow lights.

Lodar replacement receiver for 92100 Series

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold separately.

Product Specifications

This is a Lodar Actus actuator kit.

This Wireless Remote System allows you to control your equipment from a safe distance. Water-resistant receivers can be wired simultaneously with other existing hand controls that use their own signal. Systems that feature a key on the receiver can be controlled even when remote is damaged or lost. All systems include an Emergency Stop Button for added safety. 12/24V DC.

This is a 2 function handheld transmitter from Mobile Control Systems.

Wireless remote control with 2 functions. Push buttons with emergency stop. Includes handheld remote, receiver with wiring harness and glands, lanyard and cover.

This is a 6 function, handheld transmitter wireless remote. This remote is set up to run your winch in and out controls but can be set to handle up to 4 more functions.

This replacement handheld four-function transmitter operates the Valve-Mate II control system on your wrecker s existing hydraulic control valve.

Replacement lanyard for a lodar.

Everything you need to retrofit your wrecker or carrier to a wireless remote system. All kits include a valve spool, control box and wireless remote with lanyard and protective case.

This Pierce Arrow product is a wireless remote control with RX key.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

Lodar clear cover for 2,4,6 function standard Lodar transmitters.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold separately.

Please call for custom faceplate options. All default faceplates on 6+ function transmitters will be numbered.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly to the electrical plug of the existing hydraulic control valve and does not alter your hydraulic system. This system is specific for the Century and Vulcan auto load Midnight Express and 810/812 wrecker. Lifetime warranty on the electronic radio system.

Lodar Replacement Air Actuator

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately. This unit is made special to run the SP8000 side puller. It has a special function that limits the use of the jack legs. You have to hold two buttons simultainiously to use either of the jack legs. This helps prevent the legs from accidentally being used during a recovery.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.

Lodar replacement mini receiver.

Lodar Actus Electric Actuator for Hydraulic Valves. Kit Comes with a Lodar 4 Function Remote, Lodar Receiver, and an Actus Linear Actuator. For Example: This system will work with a 2 winch system IN/OUT Functions like a car carrier equipped with a Sidupuller. No Air Required. 12V power source and ground are needed for insallation. Great when using a Ford F350/F450/F550 or Dodge 3500/4500/5500 Chassis since there are no on-board OEM air compressors available. *NOTE: Is NOT compatible with any small wrecker with "cable" operated controls.

The Valve-Mate II 2-10 Function Wireless Hydraulic Controller is heavy duty and built to last a lifetime. Controls up to 8 Hydraulic Functions, such as Up and Down, In/Out, etc... this is the perfect wireless winch controller or full tow truck control! Operate your system at a safe distance... the possibilities are truly endless with the Valve-Mate II System.

"Valve-Mate II" radio controls are pre-wired, tested, and easy to install. The Valve-Mate attaches directly on the spool of your existing hydraulic control valve and does not alter your hydraulic system. This system is operated by an air cylinder using your trucks compressed air. If your truck does not have air there is a pilot pressure compressor available to supply air for this system. They also offer a lifetime warranty on the radio and the air system. A pressure protection valve is required by the D.O.T. and is sold seperately.