Towing Accessories

This Truck and Trailer Wheel Pan catches the oil that spills from the wheel hubs after the caps are removed. Fits 13-3/4" I.D. rims or larger. Side compartments hold lug nuts, preventing them from getting oily or lost. Sturdy polypropylene construction won't warp if oil is warm. Holds 88 oz.

These Low Profile Fork Holders are designed to fit a 5" x 5" or 4" x 4" crossbar. They are made from the same special cast alloy material as the other Miller products.

ITI Starter Ramp is made for Steel Beds or Aluminum Beds and bridges the gap between the tail of a flatbed car carrier or trailer ramp and the ground surface, creating an easy transition between uneven surfaces. This starter ramp is designed with a 90 degree notch for the tail to sit in place. The low load angle the ramp provides prevents unnecessary damage to high-end vehicles or equipment with low clearance issues.

This 3" Short Fork from Miller Industries is used to pick up from the leaf spring, axle or fame of a truck. These forks are made from one piece of cast alloy steel. This process has made the yield strength increase almost two fold while making the weight almost 30% lighter. The fork has a 3" wide opening with a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the cutout.

Due to manufactuing changes, current lead time is 4-5 weeks.

Utilizing the Low Pro Pocket Plug Container Skate from ITI makes loading or moving shipping containers slick and easy! This patented skate has a low-profile design achieving an overall lower height of the container when loaded on a trailer or a flatbed on a truck. Place the sea container skate beneath the corner of the container - fitting the raised plug nicely into the oblong pocket of the container. The skate's rounded ends eases the transition from the ground surface to the angle of a rollback carrier or trailer. The slick surface of the skate makes moving objects easy!

Essential to heavy-duty tow operations, this 1/4" brass air fitting allows tow operators to tie into the existing air system of a Class 8 Volvo or Mack commercial truck to supply air to the brake system when the power unit is disabled and can no longer perform this function. Using air supplied by the rear of the tow truck, this application allows the tow operator to release the casualty's brakes and prepare it for towing. Simply install directly to the metric threads on the air tank of a Volvo or Mack tractor.

This "W" Mount from In The Ditch is great for those wanting an easy solution for quickly mounting and storing their break over bar and axles. This mount is ideal for mounting in the back of a pickup, on top of a tool box or on a wrecker deck. Mount can be locked by using a Pad-Lock, which is not included. The break over bar is secured in place with a thumbscrew. This mount is made from steel and comes with a black finish. Get your

Tow like a pro with the 42.3" long Compact Single Piece HD Tow Ramp! You know that your customer loves his or her Corvette, Porsche, or other low-to-the-ground car, and you need to show them that it's safe in your hands too. The 1 inch by 5 inch notch in this Tow Ramp enables you to simply fold the rollback down into the notches and drive on up (or hook up the winch) with no worries about your safety or the safety of the car. This compact ramp gives 4.5 inches of lift and has a 5.2-degree angle of approach. It is designed for tires up to 8 inches wide, and it can support up to 2,500 pounds for a total vehicle weight capacity of 10,000 pounds.

Please call for custom faceplate options. All default faceplates on 6+ function transmitters will be numbered.

P92150-8 Specifications

• Power Source: 12 Volt DC + 80/120 PSI Air
• Master: No
• Transmitter Style: Standard
• Functions: 2
• Operates 1 Manual Lever
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 54
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92150-8
• UPC: 745444004763

Related Products
• Transmitter: 92102TX
• Receiver: 9250RX
• Holder: AC9811
• Aerial: AC9860

P92154-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: Standard
• Functions: 4
• Operates 2 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 54
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92154-8
• UPC: 745444004787

Related Products
• Transmitter: 92104TX
• Receiver: 9254RX
• Holder: AC9811
• Aerial: AC9860

P92154-3 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: Standard
• Functions: 4
• Operates 2 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 54
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92154-3

Related Products
• Transmitter: 92104TX
• Receiver: 9254RX
• Holder: AC9811
• Aerial: AC9860

P92256-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: Standard
• Functions: 6
• Operates 3 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 54
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92256-8
• Comes with IP Remote
  Related Products
  • Transmitter: 92106TX
  • Receiver: 9256RX
  • Holder: AC9811
  • Aerial: AC9860

P92258-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: Yes
• Functions: 8
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92258-8

Related Products
• Transmitter: 92210TX
• Receiver: 9260RX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9806
• Cover: AC9806M

P92258-3 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 8
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92258-3
• 8 Function
• For 4 Manual Levers
• 433 MHZ European Frequency

Related Products
• Transmitter: 92210TX
• Receiver: 9260RX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9806
• Cover: AC9806M

P92260-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 10
• Operates 5 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92260-8

Related Products
• Transmitter: 92210TX
• Receiver: 9260RX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9806
• Cover: AC9806M

P92260-3 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 10
• Operates 5 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92260-3

Related Products
• Transmitter: 92210TX
• Receiver: 9260RX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9806
• Cover: AC9806M

P92262-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 12
• Operates 6 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92262-8
• UPC: 745444005296

Related Products
• Transmitter: 92216TX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9807

P92262-3 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 12
• Operates 6 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92262-3

Related Products
• Transmitter: 92216TX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9807

P92264-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 14
• Operates 7 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92264-8
• UPC: 745444005302

Related Products
• Transmitter: 92216TX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9807

P92266-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 16
• Operates 8 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92266-8
• UPC: 745444005319

Related Products
• Transmitter: 92216TX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860
• Cover: AC9807

P92268-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 18
• Operates 9 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92268-8
• UPC: 745444005326

Related Products
• Transmitter: 92220TX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860

P92270-8 Specifications

• Power Source: 12v DC + 80/120 psi Air
• Master: Yes
• Transmitter Style: IP
• Functions: 20
• Operates 10 Manual Levers
• Amp Capacity: 10 Amp
• Transmitter IP Rating: IP 65
• Receiver IP Rating: IP 55
• Operating Distance: 200 ft (61 m)
• Manufacturer Part Number: 92270-8
• UPC: 745444005333

Related Products
• Transmitter: 92220TX
• Holder: AC9814
• Holder: AC9813
• Aerial: AC9860

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

These are deck mounted spindle mount brackets for Collins Manufacturing Dollies. These mounts come in 2 different sizes depending on the tire size of your dolly. Please select your tire size from the dropdown menu to select the correct mount you will need for your application. These mounts are sold as pairs.

This is a locking dolly axle mounting system, by Collins Manufacturing, will ensure safe storage for your cross rails and pry bar. It can be mounted to the deck for easy accessibility. This system allows you to pad lock your axles to prevent theft. These mounts come factory powder coated black.

The In The Ditch Cycle Caddy is the easiest way to load a motorcycle onto the deck of a carrier. The innovative Speed Ramp on the Cycle Caddy makes loading a motorcycle smooth and nearly effortless. No more having your cycle loader jump out of the way as you try to load a motorcycle. Our Cycle Caddy stores in a folded, compact position saving you valuable room in your tool box. The Cycle Caddy not only stores easily it also assembles easily and has easy to follow instructions printed right on it. This Caddy is made from steel, comes in a tuff coat black finish, and is strong enough to support a motorcycle up to 950 lbs.

Access Tools Collision Crash Wraps extra thick 4mil material is puncture resistant and features extended UV protection. With a high-tack adhesive that leaves behind no residue, this film is perfect for storing a vehicle on your lot or for protection during transport. Every roll of Crash Wrap comes with a Crash Wrap Cutter, specially designed to help cut safely through the durable material without any exposed blades or danger of damaging the vehicle.

ITI Yellow Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

Lodar Actus Electric Actuator for Hydraulic Valves. Kit Comes with a Lodar 2-6 Function Remote, Lodar Receiver, and an Actus Linear Actuator(s). For Example: This system will work with a single winch IN/OUT Functions. No Air Required. 12V power and ground needed for installation. Great when using a Ford F350/F450/F550 or Dodge 3500/4500/5500 Chassis since there are no on-board OEM air compressors available. *NOTE: Is NOT compatible with any small wrecker with "cable" operated controls.

This fire retardant trim from Lavanture Products Co. is a flexible trim with metal clips to provide a permanent grip. It is manufactured out of a thermoplastic Vulcanizate (TPV) material formulated to pas the National Fire Protection Agency (NFPA) standards. This material also complies with the UL 94HB flame requirements most commonly needed in electrical enclosure applications.

Aluminum T-handle, 5/8" NC thread. Used to secure Miller Heavy Duty Wrecker Fork Receivers. Fits Century and Vulcan Heavy Duty Wrecker Attachments. This part can be used to replace Part Number 12-0800590.

Spacers for use with the Century forks from Miller Industries. This attachment was designed to be used when the front axle you are picking up is narrower than the throat of the fork you are using. Simply slide the adapter over one ear of the fork and you have created 1" narrower opening in your fork without having to carry extra attachments in your tow vehicle. Remember to always use safety chains.

Preserve your brakes, improve your stopping distance and maintain safety while towing heavy-duty trucks with the SafeAll Remote Brake Assist, formerly known as the Brake-Buddy. Secured inside the cab of the disabled vehicle, this supplemental brake actuator works in tandem with the tow truck and helps keep you in compliance with federal law.

Note: Special Handling Fees Apply for Specific Items

The CONDOR Cycle Loader is a fully adjustable wheel locking towing system capable of accommodating front and rear wheel sizes from 15-22" / 80-220W. The patented locking mechanism effortlessly and securely supports your motorcycle in an upright position on the ground, on a trailer or on flat bed. The CONDOR Cycle Loader works on pavement, concrete, dirt, sand, gravel and all forms of transport platforms such as Flat Beds, Rollbacks, trailers and pick-up trucks. The Cycle Loader is the perfect device for securing and transporting any and all motorcycles on the market. Due to its simplicity and ease of use, the CONDOR Cycle Loader requires only one person to operate. All 4 rolling wheels come with individual brakes to allow the unit to be loaded without rolling or sliding. In most cases, the motorcycle needs only to be tied down with two straps, one on either side with attachments towards the middle or the rear. You will be amazed at how secure and safe the motorcycle will be once tied down in our CONDOR Cycle Loader. The CONDOR Cycle loader can accommodate bikes weighing over 2000 lbs, and can be disassembled easily to fit in any rollback toolbox. Unit breaks down to 35" x 8" x 20" for easy storage and weighs only 55+ lbs. The versatile CONDOR is also ideal for towing, motorcycle servicing, cleaning, displaying and storage.

• Increased Safety: Patented locking mechanism secures the bike in the upright position on the ground or flatbed
• Versatile: Handles all motorcycles with 15" to 22" wheels
• Uses Minimal Space: Collapsible for easy storage
• Capacity: 2,500-lb
• Dimensions: 35"L x 20"W x 8"H
• Choose from the Loader with or without the Tie-Down Straps
• With Tie-Down Straps includes (4) 1" x 6' and (2) 1" x 12' tie-down strap

ITI Low Profile Control Arm Skate is designed for use on a disabled or wrecked vehicle with a missing wheel or lugnuts, a broken ball joint, control arm, axle or other suspension components. This skate is perfect for use with high-end vehicles with low clearance concerns. The top of this patented skate has a pocket for the ball-joint and cradles the a-frame of the suspension. The rounded ends of this skate allow for easy loading as it will navigate the approach lip of a bed or trailer.

This is a locking pin for the simple mounts for In The Ditch.

SafeAll's Proportional Remote Control System allows tow operators to control car carrier or industrial carrier functions with just a twist of the wrist. As the remote is rotated by hand, the selected actuator provides proportional lever action for a precise bed angle, wheel lift placement or desired winch speed. The proportional feature of the SafeAll remote system also provides the operator with the confidence to load or hook up the most luxury vehicles or specialty equipment, limiting the risk of causing damage. The feathered control functionality the SafeAll system provides is also much safer than competitive wireless remote systems, which have very jerky, on-off functionality.