Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
An Axle Fork from Miller Industries is designed with an offset to clear the housing while still offering you all of the strength and durability you need. This fork is cast out of alloy steel and is much lighter than the conventional style of welded forks. These forks can be used with Mack and other trucks and has dimensions of a 6" wide opening, 3-1/2" clearance and a 2" diameter shaft.
This Short 5" Fork from Miller Industries is used to pick up from the leaf spring, axle or frame. These Forks are made from one piece of cast alloy steel that increases the yield strength almost two fold while also making them 30% lighter than the old fork designs. This fork has a 5" wide opening, a 2" diameter shaft and a 3" clearance between the fork holder and the bottom of the fork cutout.
This Axle Slide Tunnel Box Mount from In The Ditch has become a best seller. This mount is easy to install and easy to use; just bolt the mount to the top of your tunnel box. Axles have a tab factory installed that fits the slot in the mount. All you do is start the axle into the mount, push across, and your axle automatically locks into place. This mount will hold two axles and one break over bar. Shop for your
This air connector assembly is designed for endless truck makes and models. Simply remove the OEM air compressor supply line from the air dryer and replace it with this connector - supplying air directly to the system.
Miller Industries Specially designed for lifting the Hendrickson Airtek/Steertek front axle is the hollow beam lifting fork. Special care must be taken when lifting the air suspension hollow beam front axles currently being used on many of the Volvo VNT and Freightliner Century Tractors making this fork or a front tire lift a must.
Note: Special Handling Fees Apply for Specific Items
The Self Loading Dolly Mounts from Collins is ideal for trucks with a higher bed height. These mounts drop down over the body side about 11" were it is then loaded and then they swing up and back to the storage position. Reduces driver fatigue and back injuries from lifting the side frames over the side of the truck bed. Please select from the dropdown the tire size of your dollies you will use with this mount.
No more climbing up on the truck. The dollies come down to you
Chances reduced for any back injuries and accidents, less chance for liability claims, more time on job
Encourages dolly tows due to ease of operation; generates more revenue!
Self Loading Dolly Mounts assists in lifting the dollies on and off the truck - the gas shock does the work!
No more scratching and denting truck's paint, or hand rails or dollies hub caps
Self Loading Dolly Mounts fold back into place while dollying car
These Fork Holders are designed to fit a 3 1/2" x 3 1/2" F6500 crossbar.The T-handles are sold separately part# 12-0306564. They are made from the same special cast steel alloy material as the other Miller products. This fork holder replaces part number 12-0712749.
ITI Trailer Jack Skate is used when loading or moving trailers. Place the trailer jack pedestal shoe or wheel into the pocket of the skate. The slick surface of the skate allows for more easily moving a trailer by hand - without having to lift the tongue of the trailer off the ground. It also protects parking lots, driveways and warehouse floors from damage or marring. You can utilize this skate when loading a disabled vehicle with a trailer hitch, too! As the vehicle makes the approach up the incline of a trailer or car carrier, this skate can be placed below the hitch to prevent the hitch from gouging the road surface or parking lot, causing unnecessary damage. The slick surface of the skate makes moving objects easy!
This Vehicle Inspection Report includes key regulations for DOT-required procedures printed on inside front cover. Complies with DOT inspection regulations 49 CFR 396.11 and 396.13.
This is a Miller trailer ball adapter for Chevron auto-grip wheel lifts. This trailer ball does NOT come with a ball. Photo may be different than what will be received.
Zip's reflective vinyl pylon decals portray the "Slow Down Move Over" message in a visual way. The decals are made from a clear removable pressure activated adhesive with air release that is easily removable if need be.They are not only a great decal for your vehicle but a portion of the proceeds will be donated to the Survivor Fund as well. These decals come in a variety of colors that are easily matched to your vehicle.
This 7"H Stand extends your fork to reach higher lift points and provides extra clearance for oil pans, etc. Stand fits most stingers on the market and accepts 2"D shafted forks.
In The Ditch's Locking Short Simple Mount is a great low cost way to hold your Speed Dollies. This mount is the same as the Short Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Sold as Each.
This Ice Claw keeps you safe in icy conditions. Designed to fit 3-1/2" x 3-1/2" or 3" x 3" crossbars which are commonly found on car carriers and light-duty tow trucks.
This self-aligning fork from Miller Industries attaches to the spring itself. The fork hinging action assures alignment while lifting. This part can be used to replace Part Numbers: 12-0801090 and 124001721.
Note: Special Handling Fees Apply for Specific Items
Note: Due to size of product, additional handling charges may apply.
Phoenix Stainless Steel Stanchion Kit. This kit includes two stainless steel tubing with four chrome plated end stanchions. Pick from the kit with or without the mounting screws. These hand rails are perfect when you need to grab a handle for balance.
Low profile handrail kits
Hand and grab rails are made of 7/8" or 1-1/4" stainless steel tubing
The low profile posts or stanchions have a perma-plate chrome finish
Packed in pairs that you can mix or match to create your own combinations
Choose With or Without Mounting Screws
Dont see the size you need? These can be cut down to size
Zacklift height extenders drop into any 2" fork receiver. Any fork with a 2" shaft can be positioned in the extenders for reaching a difficult-to-reach location or for gaining extra height when towing.
The Magna Tech Best-Lift Forklift to Wheel-Lift Towing Attachment is a handy tool to manage cars and maintain organization in any storage tow lot, impound lot, salvage yard or auto auction. Turn your forklift into a fast, efficient and damage free way tool to move cars and pick-up trucks around the lot. Simply slide the forks into the receives of the attachment and you are ready to go. This operates mechanically with no hydraulics required by wrapping spring loaded arms directly around the vehicle's tires. A forklift with a minimum of a 5,000 lb capacity is required.
This air coupler assembly is commonly used when towing Freightliner, Mack or Volvo truck makes and models. The access fitting on most of these trucks is located directly behind the air compressor on the air supply line. Use this air coupler assembly to supply air directly to the disabled vehicle.