Towing Accessories

Phoenix Body Accessory Stainless Steel Tube.

The high-quality Motorcycle Cross Over Kit from B/A Products Co. offers you a reliable method of securing your valuable motorcycle for transport. This kit includes one handlebar soft tie-down strap and two ratchets with short strap and snap hooks. It allows the motorcycle to be secured to a roll back or trailer by its handlebars and hand grips. Soft cups made of webbing fit over the hand grips, then nylon straps run through a central pad and to the opposite side of the motorcycle, where your tie-down straps and ratchets are attached. Tighten your tie-downs, and it's just like you are holding the bike up yourself. Note that additional tie-downs are required to secure the backside of the motorcycle to the rollback or trailer.

Avoid fines and make sure your truck is safe and properly equipped! An AW Direct exclusive, these extremely detailed truck inspection sheets are designed specifically for the towing industry. They guide your drivers through their pre-trip inspection and cover all vehicular safety points, towing equipment safety points, and equipment and tool stock.

This Reese Receiver Wheel Lift Adapter from Miller Industries is used on GEN2 Car Carriers. This removable adapter is specifically designed to be mounted on Miller's Century, Champion, Chevron and Vulcan conventional Car Carrier Wheel Lifts, which have the built-in ball hitch receiver/towball tongue. This 2" universal receiver accepts and pintle or ball hitch with a 2" tube. It is accepted on 10 Series,12 Series LCG and 16 Series GEN2 LCG 4K standard wheel lifts. All of the mounting hardware is included on this adapter. This part can be used to replace Part Number 12-0905029.

Collins Hi-Speed® Dollies are the safest and lightest-weight PRIME-MOVERS of vehicles, with the heaviest load capacity – up to 25 times its own weight, and with no towing-distance restrictions, (tested to 1,600 FREEWAY miles). They were tested at the GM Proving Grounds in the U.S., as well as undergoing extreme, rigorous testing at the Mira Proving Grounds in the U.K. for European Certification. Having successfully passed these grueling tests and becoming certified, the Collins Hi-Speed® Dolly is the most proven dolly of all time.

Swing Arm Style Dolly Mount Bracket-Mounts on the rear tailgate section next to the wheel lift boom allowing for better rear visibility and freeing up the upper deck area for mounting additional equipment such as fuel cans or air tanks. The swing arm is released by a camlock that allows the dollies to swing past the side or tail section for better access and the lower mounting height making them easier to lift on and off. Sold as a pair, so you get 2 dolly mounts. One for each side of your wrecker.

These silver Snap Pack Form Carriers makes filling out paperwork easy. The spring clip on the top right side holds papers firmly in place while the hinged writing plate protects against write throughs. The left side is ideal for form storage with the wide aluminum band to lock documents in place. Also, side opening allows for easy access to documents.

The Condor Towing Self-Loader is specially designed for wreckers self-loaders, to use in transporting all types and sizes of motorcycles safely, securely and efficiently, in all kinds of weather and on all kinds of surfaces. This easy to use kit incorporates our patented fully adjustable wheel locking mechanism to support any bike in an upright and secure position so it is ready to be tied down. The Towing Self-Loader provides piece of mind for the operator and the customer. The Condor Towing Self-Loader can be quickly removed and its components easily fit into any self-loader toolbox. Also Adapts for use with the following: Century 312, Dynamic 601, Dynamic 701, Jerr-Dan MPL, Vulcan 810 Intruder, Chevron 401 Outlaw, Century 301 Express, Chevron 408 Renegade, Century Midnight Express, Recovery Solutions 400 Series, Recovery Solutions 500 Series.

Lodar Holder for Mini, Industrial, and IP Transmitters.

With the reliable durability of the solid 3.5" by 15.75" B/A Individual Tire Skate from B/A Products Co., you can effectively decrease the time spent on loading a vehicle onto the flatbed trailer. This tire skate is designed to wedge right under the vehicle's wheel so that it can help ease the car onto the flatbed much more gently without letting the car bump around and possibly damage the frontend. The skate has the durability to support the vehicle, allowing it to get pulled onto the flatbed without sticking or binding.

This air connector assembly is designed for endless truck makes and models. Simply remove the OEM air compressor supply line from the air dryer and replace it with this connector - supplying air directly to the system. #10 Female JIC fitting.

Maximize your dolly towing capabilities with these dolly tow cradles from Collins. When towing a vehicle with missing wheels these tow cradles are a must. Easy to use with a lightweight, heavy duty aluminum construction. Sold as a pair.

Zip's Built Anchor Spade is a custom-fit accessory designed for Miller Industries 10 Series and 12 Series LCG Car Carriers. This spade fits over the rear bed stabilizer pad of the car carrier. This attachment fits both the Right and Left Stabilizer Leg.

Increase the versatility of your Miller Chevron 408 Gen II Auto Grip with this set of bolt-on Fork Receivers from Zip's. Featuring a capacity of 4,000 lbs. as a set, this pair of welded steel adapters offers three fork positions, which allows the tow operator to set forks where needed. By improving the functionality of the wrecker, a tow company is able to handle a larger variety of calls, thereby increasing profits and seeing a return on their investment.

GuniWheel's gunispacer 45 provides clearance for assemblies with oversized brake calipers. For use with GUNIWHEEL 45.

This air coupler assembly connects to the flat-faced fitting of the air tank on some International 4300 and MV models along with some Ford F650/750 truck models.

This king pin attachment requires

This is a polished stainless steel dress-up kit for the SP9000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

These Replacement Tow Sling Straps are for a JerrDan Style Tow Sling. Each Sling has three holes on each end. Slings are sold as a pair.

ITI offers a full line of skates for a variety of applications. Their products are known for their durability and reliability. Get acquainted with them with this ITI Rollback Starter Kit. This introductory package includes a pair of Automotive Skates to help move disabled or locked vehicles, as well as a Control Arm Skate for vehicles with wheel impairment or suspension issues. This kit will help get you started down the path to timely and efficient recoveries. Save over buying these skates individually.

The Condor Trailer-Stop serves as the perfect transportation device for any motorcycles on the market. Once snapped into the trailer bracket and secured with the wing bolts onto a trailer or truck bed, simply push the motorcycle forward into the patented locking mechanism and the motorcycle stands upright. Tying down the motorcycle becomes a simple one person operation. You will be amazed at how secure and safe your ride will be once tied down in the cycle cradle.

This is a replacement locking dolly combination mounting brackets by Collins Manufacturing. This mount accommodates your dolly, cross rail (axle), and pry bar (break-over bar).

This Steertek Axle Fork is designed to work with Hendrickson Steertek axle systems. The fork features a 2"D x 4"H shaft which fits any 2"-dia. receiver hole. Made from high-tensile steel for strength and durability.

JJ Keller's Driver's Daily Log Book with Simplified DVIR is 2-ply and measures 8-1/2" x 5-1/2". Daily log includes "total mileage today" box, home terminal address line and "from" and "to" lines.

This is a Miller Industries Pintle Hook and Fifth Wheel Adapter Kit. It is designed specifically for Miller 16 ton wreckers including the Vulcan V-30, Century 3212, Vulcan V-24 and Holmes 600R. It fits a 3" x 4" crossbar.