Miller Industries

This Miller Industries product is a full assembly of the left side tail light for a car carrier.

This Miller Boom Angle Indicator is standard on all rotators with an Integrated wheel lift.

This Boom End Swivel Weldment from Miller Industries is used on the Boom Swivel Assembly of Century and Challenger Heavy Duty Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns. This part can be used to replace Part Numbers: 12-0800509 and 12-0800510.

This 1/2"-13 x 2" long Carriage Bolt from Miller Industries is used on the Bed Lock Assembly of Century 10 Series Carriers made prior to 2001, and Century 20 Series Carriers made from 2002-2006. See the features below, and the brochure tab for a list of breakdowns. This part can be used to replace Part Number 12-0400210.

This is an outer control rod for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a crossrod on light duty wreckers by Miller Industries. It can be located as the center rod within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

This is a replacement pin retainer from Miller Industries.

33" Tall Steel Light Pylon from Miller Industries. Installation Includes a plastic isolator between the pylon and the body. This light pylon fits on Chevy 3500's without tunnel toolbox, For F-350 through F-450's without tunnel toolbox, and Dodge 3500 through 5500 without tuneel toolbox.

Miller Industries P70 valve for heavy duty wreckers. It is used on the recovery boom, underlift, winch, spade, pump, valve, and filter hydraulics.

This is a control handle pivot rod on the Vulcan 807 and 880/890 Series by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This Mounting Channel U Bracket from Miller Industries is used on the Winch Clutch Control assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan Car Carriers. See the features below for a list of carriers that this bracket fits, and see the brochure tab for breakdowns.

This 3 drawer toolbox by Miller Industries was designed to fit in many applications including Century, Vulcan, and Chevron low side boxes. It will also work in other locations such as the 204" tri axle configurations in the Century and Vulcan Heavy Duty lines.

This is a hydraulic hose track cover plate on the outer boom of a Modular Midnight Express by Miller Industries. See Brochures for a reference chart and Features for related parts.

This is a long shifter valve on light duty wreckers by Miller Industries. It is 11 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 12-0800613.

This is a wheel lift crossrod on light duty wreckers by Miller Industries. It can be located at the 3rd or 5th rod within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

Vulcan 819 and 821 Series Car Carrier Bed Extend Cylinder Seal Kit for cylinder #814010900. Fits only Pre 1998 Production carrier with serial numbers beginning in 5 or 8. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

This is a Miller Industries 67.5" Control Channel Box to connect the driver and passenger side control box hoods. It is designed for all Century/Vulcan Car Carriers before 2000. It houses all the hoses / electronics for a 5-spool system and is a galvanized finish. This control channel box comes in 2 different lengths, 67.5"(12-0801559) and 74"(12-0720437). In order to be accurate with you part selection you should measure the length your old one to see if it matches up correctly with this 67.5" control channel box.

Miller Industries End Cap Chain Hook Adapter for Vulcan V30, Century 3212, and Holmes 600R 16 Ton Wreckers with low profile 3" x 4" crossbar.

This is a replacement retaining ring by Miller Industries. This ring measures 3.5" in diameter.

This is a Pivot Pin Kit for a Century Midnight Express 300 Series by Miller Industries. This kit will provide you with everything you need to replace your old worn out pivot pin on your wrecker's wheel lift.

Miller Industries provide a replacement outrigger pivot pin.

This Fenderette Kit from Miller Industries will provide a clean and custom appearance on the Century 2465 and Vulcan V-24 chassis. This kit is designed specifically for these units. The Fenderette Kit includes two fenderettes and mounting hardware. Each fenderette is about 2.5" wide, can be painted to match the body and it easily attaches with screws into the body wheel lip.

This is a replacement hydraulic winch motor that runs the hydraulic assembly on light duty modular wreckers equipped with 10,000 lb. winches from Miller Industries. To view which specific models this motor will fit, see Features below. To view the part schematics, see the Brochure tab.