Miller Industries

This is a replacement lower spade pad weldment on heavy duty Century wreckers by Miller Industries. This spade pad attaches to the inner spade weldment on the spade of the wreckers. This spade pad will fit Century 5130/5230, 7035, and 9055 heavy duty wreckers. To view the specific models this spade pad will fit, see Features below. To view the part schematics, see the Brochure tab.

This Control Station Guard from Miller Industries is used on the body assembly of Century, Challenger, Champion, Eagle and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar. Powder Coated BLACK as Factory.

This is a 6 1/4" Miller universal gas spring great for opening and holding toolbox doors.

Otherwise known as a tire restraint and wheel retainer, this 2 square L-arm fits the wheel lift on Holmes DFT-100 Series wreckers. This steel painted L-Arm can be used on the driver or passenger side and fits the following outer crosstubes: GX-363 and GX-364.

Hydraulic recovery winch.

Miller Industries Fork Risers for a 614. Fits a 3.5" x 3.5" Crossbar.

Option of driver or passenger side pivot-style l-arm receiver bracket from Miller Industries attaches to the outer crosstubes on Vulcan 850 Series light-duty wrecker wheel lift assemblies. Also known as a wheel retainer and tire restraint, the L-Arm slides into the angled opening, and the desired position is secured with the bottom side locking pin. This scoop bracket weldment includes the swivel locking pin and the comfort grip stop pin.

Note: Special Handling Fees Apply

Note: Due to size of product, additional handling charges may apply.

• 3.5" x 3.5" Crossbar for Century F6500 Wheel Lift & Holmes DFT 650 Wheel Lift
• Accepts 12-0901406 & 12-0901407 standard 3500lbs l-arm cross tubes
• Also accepts 12-0904690 & 12-0904691 medium duty 6000lbs l-arm cross tubes
• Also accepts 12-0904158 & 12-0901459 pivot style cross tubes
• Uses WL-6500DK1 detent ball kit

This Nylok hex nut is zinc plated. It is 5/8" in diameter with 11 threads per inch.

This is a centering crossbar plate for wheel lift on the Vulcan Modular 804/806 and Century Modular 211 by Miller Industries. See Brochures for reference chart.

This Cap from Miller Industries is used on 4-Ton Hydraulic Winches. This winch assembly is used on several Miller Car Carriers, including Century, Challenger, Champion, Holmes, and Vulcan Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This is a replacement fluid tube for a LCG Car Carrier by Miller Industries. This tube connects the winch motor to the under body line beneath the bed of the car carrier.

This is a replacement fluid tube for a LCG Car Carrier by Miller Industries. This tube connects the winch motor to the under body line beneath the bed of the car carrier.

This is a replacement decal for the control panel on the Miller Industries DTU unit.

Seal Kit for Vulcan 891 and 821 Series Car Carrier Wheel-Lift Extend and Bed Lift Cylinders. Services #814010800, #814010700, #814011500, #810411100 50" Pin to Pin cylinder and 814011500 60.75" Pin to Pin Cylinders. Fits only Pre 1998 Production early carriers with serial numbers begininng in 5 or 8. Please remember that seal kits may fit different cylinders of the same diameter. See the chart below for more information.

This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series light duty wreckers with a Formula III wheel lift. This is the cylinder that raises your wheel lift boom up and down. This cylinder replaces part number 12-0303101 (which is no longer available).

This is a replacement cylinder for the rear stabilizers on a Chevron Renegade 408 model wrecker.

This is a Miller Raptor 4pt waist, Akit-3678-04.

This Miller Industries Side Pull Stabilizer is designed to pin on and off the multiposition rear spades on the Century and Challenger integrated and fixed boom heavy duty towing and recovery units. The side pull stabilizer provides additional stability on side and corner pull applications. (One per kit)

This part can be used to replace Part Number 12-0802232.

This is a replacement Cylinder Bushing made out of Copper.