Muncie

Hot Shift PTO for AUTOMATED Manual Transmission with Electric over Air Shift (Example - UltraShift Plus FO16E310C-VAS), 7/8 x 13 Spline.

This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison automatic transmission when installing a Miller Car Carrier built after 06/15/2015 or a Miller Industries with a 1" x 15 spline pump shaft.

This is a replacement filter element for filter assembly part number

This is PTO, Muncie 109%, Sae "C" flange with a 5" pilot 14T spline.

CS6/CS8 "S" shaft from Seneca Tank.

This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000 and 2000 Series Automatic Transmissions. The PTO comes with all components needed for installation. The PTO is set up to accept a directly mounted hydraulic pump.

2 Bolt short front cover pump. It has a pipe thread port type that contains ports on both side and rear locations. It is also a bi-rotational pump.

This Muncie Hot Shift Power Take Off (PTO) is for installation on Allison 1000 and 2000 Series Automatic Transmissions. The PTO comes with all components needed for installation. The PTO is set up to accept a directly mounted hydraulic pump.

Muncie hydraulic pump, 2 bolt mount, 3/4" - 11 spline input shaft, 11 gallon per minute flow at 1000 rpm. O-ring ports on rear and side of pump. Bi-rotational.

Steel tank assembly, fully baffled, with dual suction and return line ports. Features a magnetic drain plug, filler/breather assembly and oil level/temperature indicator.

Drag break spring from Seneca Tank.

This Muncie shaft extension is used on the CS24 Series Allison 4000 transmissions without a retarder or rear cooler. It provides easier hydraulic pump installation by moving the hydraulic pump mount to the rear of the transmission.

This is a Seneca Tank Hot Shift PTO.

Muncie 109% Sae "c" flang pto.

This is a 107%, SAE "B" flange Muncie PTO with a 4" pilot and 14 T spline. For Centery 9055 Wrecker

Integrated mounting angles and dual outlet and return ports for flexible mounting options. An internal full size baffle between the outlet and return ports. Made of steel.

This pump operates from direct engine power. A dash-mounted switch permits convenient control. Solid one piece shaft. Integral mounting pad. Both side and rear ports make installation easier.