Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
The all around manual for Vulcan 10 Series Aluminum & Steel Car Carriers. This manual includes installation guides, operation guides, and how to maintain your carrier. The manual also has a section on all of the parts that make up the carrier, so if you have a problem you can easily find the replacement part.
This is a wear pad holder on the up/down portion of the wheel lift by Miller Industries. It is bolted on by tow bolts and there are 2 wear pad holders per wheel lift. This wear pad holder fits the following wreckers: Vulcan 880/890, Modular 880/890 and 896/897. See Features for related hardware and Brochures for reference charts.
This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This pin is used to connect the wheel lift extend cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.
This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Wheel Lift Extend Cylinder on the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder connects the inner and outer wheel lift boom weldments together. This cylinder is what extends the wheel lift stinger out and in. To see which specific models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the lower pin and it goes through the rod end of the cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Wheel Lift Tilt Cylinder Upper Pin on the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the upper pin and it goes through the base end of the cylinder. This cylinder connects the lift cylinder to the wheel lift tilt column weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This adjustable L-Arm from Miller Industries fits the driver side of the wheel lift on Vulcan 896 and 897 medium-duty wreckers. Otherwise known as a tire restraint or wheel retainer, this zinc-plated mild steel 2" x 3" rectangular tube fits the 12-4008001 outer crosstube. The L-Arm is angled in and downward to create additional clearance on smaller vehicles. The scoop style tire pan is also grated for improved grip.
This is a replacement front mounting pin weldment for the extend cylinder on heavy duty Vulcan wreckers. This pin fits the V-60, V-70, V-90, and V-100 heavy duty wreckers by Miller Industries. This pin attaches the wheel lift stinger extend cylinder to the wheel lift folding boom weldment. To view part schematics please click on the Brochure tab.
This is the Lift Cylinder on the Wheel Lift of the Vulcan 880 / 890 Series and Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder attaches to the wheel lift tilt column weldment and to the wheel lift outer boom weldment. This is the cylinder that raises your wheel lift on your wrecker up and down. To see which specific wrecker models this cylinder fits please see Features below. To view the part schematics click on the Brochure tab.
This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift inner boom weldment. To view the part schematic click on the Brochure tab.
This is the Wrecker Boom Lift Cylinder for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This cylinder attaches to the outer wrecker boom weldment and the subframe of the wrecker. This cylinder raises the boom of your wrecker up and down. This cylinder can also be referred to as the boom elevation cylinder. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Tilt Cylinder for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift of your wrecker up and down. This cylinder is attached to the wrecker outer boom weldment and the wheel lift outer boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.
This is the Wrecker Boom Lift Cylinder for the Vulcan 880 / 890 and 896 / 897 Series light duty wreckers by Miller Industries. This cylinder attaches to the outer wrecker boom weldment and the subframe of the wrecker. This cylinder raises the boom of your wrecker up and down. This cylinder can also be referred to as the boom elevation cylinder. To see which specific models this lift cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Wrecker Boom Lift Cylinder for the Vulcan 805, Vulcan 806, and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that raises the wrecker boom up and down. This cylinder attaches to the wrecker subframe weldment and to the wrecker outer boom weldment. This cylinder is also referred to as the boom elevation cylinder. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.
This is a replacement boom lift cylinder for the Vulcan V-70 and V-90 heavy duty wreckers by Miller Industries. This lift cylinder connects to the wrecker's subframe and to the outer boom weldment. This cylinder is designed to fit the right and left side of the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.
This is a replacement boom extension cylinder for the Vulcan V-60, V-70, V-90, and V-100 heavy duty wreckers by Miller Industries. This cylinder connects to the inner and outer boom weldments and extends the inner boom weldment away from the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.
This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This cylinder pin goes through the rod end of the cylinder. This pin connects the boom extend cylinder to the wrecker inner boom weldment. To view the part schematic click on the Brochure tab.