Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 880 / 890 Series and the Vulcan 806 Series light duty wreckers by Miller Industries. This pin is used to secure the boom extend cylinder to the inner wrecker boom weldment. To view the part schematic click on the Brochure tab.
This is a top cover plate for a Vulcan 880/890 Wheel Lift by Miller Industries. It is bolted down by two bolts. See features for related hardware and see brochures for a reference chart (item #27).
This is the Wheel Lift Tilt Cylinder for the Vulcan 805 Series light duty wrecker by Miller Industries. This is the cylinder that tilts the wheel lift of the wrecker up and down. This cylinder attaches to the wheel lift outer boom weldment and the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Extend Cylinder for the Vulcan 805 light duty wrecker by Miller Industries. This cylinder attaches to the wheel lift outer and inner booms. This is the cylinder that extends the wheel lift in and out on your wrecker. To view the part schematic click on the Brochure tab.
This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 880 / 890 Series light duty wrecker by Miller Industries. This pin has a 1-1/4" diameter and a length of 6-5/8". This pin is used to secure the boom extend cylinder to the outer wrecker boom weldment. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Tilt Cylinder on the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift up and down on your wrecker. This cylinder attaches to the wrecker subframe and to the wheel lift tilt column. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the base end of the extend cylinder. This pin connects the wheel lift extend cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This Miller Industries product is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for Vulcan Car Carriers. It includes all the necessary parts to replace the entire tail light section. This product bolts into the mounting bracket which is attached to the subframe of the carrier.
This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Wrecker Boom Extend Cylinder Pin for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This cylinder pin goes through the base end of the cylinder. This pin connects the boom extend cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Tilt Cylinder Upper Pin for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Lift Cylinder on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the cylinder that raises and lowers the wheel lift of your wrecker. This cylinder attaches to the wheel lift outer boom weldment and the wheel lift tilt column. To view the part schematic click on the Brochure tab.
This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the wheel lift tilt column. To view the part schematic click on the Brochure tab.
This is a replacement boom extension cylinder rear pin for the Vulcan V-100 heavy duty wrecker by Miller Industries. This pin connects the boom extend cylinder to the inner boom weldment of your wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.
This is the Wheel Lift Extend Cylinder for the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the Cylinder that extends the boom of your wheel lift out and in. This cylinder attaches to the wheel lift outer and inner boom weldments. To view the part schematics click on the Brochure tab.
This is a replacement boom extension cylinder front pin for the Vulcan V-100 heavy duty wrecker by Miller Industries. This pin connects the boom extend cylinder to the outer boom weldment of your wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.
This is the Wrecker Boom Extend Cylinder on the Vulcan 896 and 897 Series light duty wreckers by Miller Industries. This is the cylinder that extends the boom of your wrecker out and in. This cylinder connects the wrecker outer boom weldment with the wrecker inner boom weldment. To view the part schematic click on the Brochure tab.
This is a replacement boom lift cylinder for the Vulcan V-50 heavy duty wrecker by Miller Industries. This cylinder attaches to the subframe and outer boom weldment of your wrecker. This cylinder is designed to fit both the right and left side of the wrecker. To view the models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.