Zips

Cylinder Pin Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel lifts. This kit includes all of the pins that hold the tilt cylinders, the lift cylinders, and the upper arms, the hardware to hold the hold pins, new bushings for the tilt cylinders pins, new bushings for the upper arm pins, and grease fittings.

This replacement retainer pin assembly secures 2" fork lift adapters on heavy-duty underreaches. Featuring a cable lanyard and removable spring clip, the pin assembly ensures adapters are inserted properly and secured for transport, thus increasing safety for the tow operator and motoring public.

Zips utility tie-downs feature Double J and D-Rings on each end. These straps are available in 12' length to meet your needs.

Zip's Replacement Transport Strap with Swivel J Hooks features 2?W abrasion-resistant webbing and comes attached to swivel J hooks.

One of the most frightening or dangerous things we could deal with in our industry, as well as many other industries, is transporting equipment that is not properly secured. While it not only could ruin the equipment being transported, it poses an even bigger threat to the health and safety of those around. This is where the lever binder kit comes into play. Boasting one lever binder and one grade 70 chain assembly, this kit prioritizes safety and makes it a paramount characteristic during all your tie down applications.

Pivot Pin Kit for Holmes DFT-100 wheel lift. Kit includes (1) GR-63 Pivot Pin, (1) GR-232 Pivot Pin Bushing, (1) GR-50 Pivot Pin Retainer Plate, and (2) DE-524 Button Head Screws.

We get it. Tow operators get in a hurry when they're under pressure. Law enforcement is often breathing down their neck, and they want to get the road open as soon as possible. Mistakes can happen, and the wrong hydraulic lever can be pulled. If they’re not paying attention, an expensive steel winch line can be accidentally stretched the tieback hook normally is the failure point and compromised, ultimately putting it out of service.

Zips utility endless loop tie-downs. These straps are available in 12' length to meet your needs.

This is a 17" shelf divider for 17" deep shelf kits offered by Zip's Truck Equipment. This divider is sold as each.

Long-handled ratchets from Zip s provide additional leverage and enhanced ergonomics when strapping down freight on flatbed trailers, rollbacks and car haulers. To improve handling and minimize slippage, the molded rubber comfort grip includes grooves on both the handle and the release mechanism. The forged finger hook provides flexible tie-down options and can be replaced as needed by removing the nut and bolt. Each steel-plated ratchet assembly accepts 2"W webbing and is labeled and stamped with its Working Load Limit (WLL) of 2,200 lbs. The double-locking system keeps straps tight.

One of the most frightening or dangerous things we could deal with in our industry, as well as many other industries, is transporting equipment that is not properly secured. While it not only could ruin the equipment being transported, it poses an even bigger threat to the health and safety of those around. This is where the lever binder kit comes into play. Boasting two lever binders and two grade 70 chain assemblies, this kit prioritizes safety and makes it a paramount characteristic during all your tie down applications.

This tie-down assembly features a ratchet with chain and an 8' strap with flat snap hook. This assembly is commonly used with a Chevron style Autogrip wheel lift but can be used in many other applications as well.

Maximize your storage space with this lifting fork storage carousel from AW Direct. This storage solution is ideal for storing most of your standard and specialty frame forks. With this system you can easily find and access just the right forks for the job at hand. The carousel is designed to be installed in the 30", 36" or 48" saddle tunnel boxes on a Century or Vulcan heavy duty wrecker or Rotator. This system can also be installed in a variety of other brands of tow truck storage compartments. Aluminum Construction. Paint is not included.

Zip's easy glide single GE mounting bracket PTO cable.

Note: Special Handling Fees Apply

Aluminum tread plate trim rock protection for 5130 tail board and rear of boom. Easy to install using 3M double sided tape.

• Aluminum Diamond Plate
• Cut to fit

Zip's Custom dolly tray for car carrier. This dolly tray is for 5.70 dollies. This custom dolly tray allows you to store your dollies out of the way while still being able to have easy access to the dollies.

Note: Special Handling Fees Apply for Specific Items

L-shaped Wheel Lift Arms from Zip's are made from welded steel tube and are designed to replace either the driver side or passenger side of an auto-loading wheel lift on light-duty wreckers from Miller Industries. Powder-coated black for corrosion resistance, the steel composition ensures the arms can withstand the weight and stress of lifting heavy vehicles without compromising their structural integrity.

The design and construction of these wheel lift arms offer stability and leverage during the lifting process. The pivoting end is reinforced to eliminate any sag while clamping the tire, and the L-shape design creates a tight and secure hold on the tires. A locking mechanism prevents accidental release and ensures the safety of the towed vehicle.

Sold individually, these wheel lift arms are designed to fit various tow truck models, including Century Modular, Century Express, Holmes and Vulcan.This compatibility ensures a seamless integration into different towing setups. See the fitment list below to find the specific models of auto-loading wreckers for these wheel lift arms.

• Steel tube construction
• Reinforce pivot point
• Powder-coated black for corrosion resistance
• Passenger or driver side positioning
• L-shape design
• Locking mechanism
• Sold individually

Fitment:
• 2010 - Current Century Modular Midnight Express
• 2000 - Current Century Midnight Express
• 2007 - Current Century Express 300 Series Modular
• 2009 - Current Holmes 440SL
• 2007 - Current Vulcan Modular 807
• 2000 - Current Vulcan 810 Intruder

Pivot Pin Kit with replacement top and bottom crossbar plates for Holmes DFT-100 wheel lift. Kit includes (1) GR-63 Pivot Pin, (1) GR-232 Bushing, (1) GR-50 Pivot Pin Retainer Plate, (2) DE-524 Button Head Screws, (1) GX-45 Bottom Crossbar Plate, and (1) GX-356 Top Crossbar Plate.

This is a replacement ratchet assembly with parallel hook.

Pivot Pin Kit, Challenger Invader wheel lift. Includes (1)

The narrow profile of the GUNIWHEEL makes this universal replacement wheel easy to store just about anywhere. A set of four can be neatly stacked in the corner of a shop when they're not in use, or if you desire less lifting and more maneuverability, consider this GUNIWHEEL storage cart from Zip's AW Direct.

Pivot Pin Kit for Holmes DFT-100 wheel lift. Kit includes (1) GX-46 Pivot Pin, (1) GR-232 Pivot Pin Bushing, and (1) GX-118 Pivot Pin Retainer Plate.

This zinc-plated steel replacement pivot pin is used to connect various attachments to Zip's HD Underreach Towing Adapter, including the fifth wheel plate adapter, kingpin adapter and gooseneck ball adapter. The 2" pin includes a stop lip to prevent the pin from spinning on one end and a hole for the spring retainer clip on the other. This pin ensures attachments are secure and functioning properly.