0 Item(s)
You have no items in your shopping cart.
Customers who bought this item also bought
Miller PIN-LOWER LINK USE HD-68
This is a replacement lower link use HD pin-68 from Miller.
2" Diameter X 4-3/8" Length
$52.99
Miller Bearing, Garmax, Century
This is a replacement Bearing from Miller Industries that is used on the
Formula IIT Underlift Assembly of Century 614 Formula IIT Wreckers.
$52.99
Miller Rod End Wheel Lift Tilt Cylinder Pin Century 614 FIIT Aluminum
This is the Wheel Lift Tilt Cylinder Pin on the wheel lift of the Century 614
FIIT Aluminum Body light duty wrecker by Miller Industries. This pin is used on
the rod end of the tilt cylinder. This is the pin that connects the wheel lift
tilt cylinder to the outer boom weldment of the FII/T wheel lift. To view the
part schematic click on the Brochure tab.
$55.99
Miller Base End Wheel Lift Lift Cylinder Pin Century 614 w/ Formula II
This is the Lift Cylinder Upper Pin on the Century 614 Series light duty
wreckers with Formula II wheel lifts by Miller Industries. This pin goes
through the base end of the lift cylinder. This is the pin that connects the
lift cylinder to the wheel lift's frame weldment. To see which specific models
this pin will fit please see Features below. To view part schematics click on
the Brochure tab.
$98.99
Fastenal Nylock Nut, 3/8"- 16
This is a replacement 3/8" - 16 Nylock Nut. Sold as Each. This part can be used to replace Part Number 12-0400392.
$0.19
Miller Wheel Lift Cylinder Seal Kit Century 614 w/ FII
This is the seal kit that is need to replace the seal of the lift cylinder on
Century 614 light duty wreckers with Formula II wheel lifts by Miller
Industries. The lift cylinder part number that this seal kit is for is
12-0303884. To see which specific models this seal kit will fit please see
Features below. To view part schematics click on the Brochure tab.
$125.99
Miller 6.5" Thrust Washer Century / Challenger / Holmes
This 6.5" Thrust Washer from Miller Industries is used with a pivot pin in many
different Miller Wrecker assemblies. These assemblies include the boom, wheel
lift, crossbar, and underlift assemblies of Century, Challenger, and Holmes
Wreckers. Please see the brochure for a full list of breakdowns.
$12.99
Related products
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
Miller Wheel-Lift Lift Cylinder Seal Kit Century Challenger Champio Holmes Vulcan
This seal kit is designed to withstand the temperatures and pressures of
hydraulic cylinders and can help operators get the maximum productivity out of
their machine. Resealing cylinders is one way to help lower operating costs and
improve the performance of your machines hydraulic system. This cylinder fits
the wheel-lift lift cylinder used on both car carriers and light duty wreckers.
See Features below to view specific models of each. To view part schematics
click the Brochures tab. Please remember that seal kits may fit different
cylinders of the same diameter. See the chart below for more information.
$52.99
Miller Swing L-Arm Cylinder Clevis Pin 5/8" x 1.5" Century Holmes Vulcan
This is the clevis pin for the Swing L-Arm cylinder on the Century Express 300
Series, Holmes 440SL and the Vulcan 810 Power Tilt light duty wreckers by
Miller Industries. This clevis pin measures 5/8" x 1.5". This pin is used to
connect the swing L-arm cylinder to the swing L-arm. To see which specific
models this pin fits please see Features below. To view part schematics
click on the Brochure tab.
$9.19
Miller Boom Lift Cylinder Seal Kit Century and Holmes
This is a Seal Kit for the Boom Lift Cylinder on Century and Holmes Light Duty
Wreckers by Miller Industries. This seal kit will fit the lift cylinder on
Century Formula I Duplex Tilt 411 & 412, and Holmes HP 552 / DFT 650. To view
part schematics click on the Brochures tab.
$41.99
Miller Right Wheel Cylinder Retainer
This is a replacement auto grip claw cylinder for second generation auto grip
autoloaders, 2003 and up. Right hand claw cylinder. This is the cylinder that
moves your right wheel retainer on your wheel lift.
$1,336.99
Chevron Auto Grip Claw Cylinder, Left, 2nd Generation
Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up.
Left hand claw cylinder.
$1,336.99
Miller Wheel Lift Tilt Cylinder Upper Arm Pin Century Holmes
This is a Pin that is used in different locations on the Wheel Lift of Century
Formula I Duplex Tilt 411 & 412, and Holmes 440 Series / DFT 400 light Duty
wreckers by Miller Industries. This pin is used to hold the tilt cylinders on
to the wheel lift frame weldment. This pin also is used to attach the upper arm
weldments to the wheel lift frame weldment also. To view part schematics click
on the Brochure tab.
$90.99
Miller Snap Ring 1" External Vulcan Modular 880 / 890
This is a 1" Snap Ring by Miller Industries. This snap ring is used on the
wheel lift extend cylinder pin. This snap ring secures the pin in place. To
view the part schematic click on the Brochure tab.
$1.79
Miller Seal Kit Wheel Lift Fold Cylinder 12-0302919
This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.
$93.99
Miller Swing L-Arm Cylinder Century Challenger Holmes Vulcan
This is the Swing L-Arm Cylinder, also known as the Claw Cylinder, for autoload
wreckers by Miller Industries. This cylinder will fit Century Express 300
Series, Midnight Express Series, Challenger 4300 Express Series, Holmes 440SL,
Vulcan Modular 807, 810 Intruder and 810 Power Tilt Wreckers. To view part
schematics click the Brochures tab.
$776.99
Miller Rear Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan 6" x 7/8"
This is the rear extend cylinder pin for many light duty wreckers by Miller
Industries. This pin will work with most Century, Challenger, Champion, Holmes
and Vulcan light duty wreckers. This pin measure 6" long with a diamter of
7/8". To view specific wrecker models this pin fits see Features below.
$27.49
Miller Swing L-Arm Cylinder Pin Century Challenger Vulcan
This is the L-Arm side, Swing L-Arm Cylinder Pin. This pin fits cylinder part
number 12-0303844. This pin fits Century, Challenger and Vulcan wrecker models.
To view specific models see Features below. To view part schematics click on
the Brochures tab.
$85.99
Miller Wheel Lift Extend Cylinder Pin Century Challenger Champion Holmes Vulcan
This is the front extend cylinder pin for the wheel lift extend cylinder on
Miller Industries Light Duty Wreckers. It replaced part number 12-0703345. To
view what models this pin fits on please see Features below. To view part
schematics click on the Brochures tab.
$39.99
Miller Seal Kit Wheel-Lift Extend Cylinder
This 12-004086 Seal Kit fits 10 Series Century, Holmes, Champion Wheel-lift
In/Out Cylinders using a 0302178 Cylinder 2.5" x 60" to 12/2002. This seal kit
will also fit wheel lift extend cylinder, 12-0303020, on Century, Challenger,
Champion, and Holmes Light Duty Wrecker Models. Please remember that seal kits
may fit different cylinders of the same diameter. See the chart below for more
information.
$48.99
Miller Seal Kit Swing L-Arm Cylinder 12-0303844
This is a replacement seal kit for the swing L-arm cylinder for autoload
wreckers by Miller Industries. This seal kit if for cylinder part number:
12-0303844.
$80.99
Miller Wheel Lift Extend Cylinder Century Challenger Holmes Vulcan
This is the Wheel Lift Extend Cylinder on Light Duty Wreckers by Miller
Industries. This extend cylinder will fit on the following models. The Century
300 Express Series, The Century 300 Modular Express Series, The Challenger 4300
Express Series, The Holmes 440SL Series, The Vulcan Modular 807, The Vulcan 810
Intruder, The Vulcan 812 Intruder, and The Vulcan 810 Power Tilt. To view part
schematics click the Brochure Tab.
$737.99
Miller Boom Extend Cylinder Seal Kit Century Challenger Holmes
This is the Seal Kit for the Boom Extend Cylinder on Miller Light Duty
Wreckers. This seal kit is for cylinder part number 12-0301755. To view what
models this will fit see Features below. To view part schematics click the
Brochures tab.
$19.49
