Cylinder and Pin Replacement

This is the Wheel Lift Tilt Cylinder for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This cylinder allows your wheel lift to tilt up and down. This cylinder connects to the wheel lift tilt column and the subframe of the wrecker. To view the part schematic click on the Brochure tab.

Note: Special Handling Fees Apply

This hydraulic wheel lift up/down cylinder is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. This cylinder has a 4" bore. This cylinder will work with wheel lift applications on both car carriers and light duty wreckers by Miller Industries. This cylinder is designed to be used on 1989 - 1997 Formula I and WL-300 equipment without a valve. This lift cylinder fits Miller 10 Series Carriers from 2001 to Current and Standard and Right Approach 10 Series Carriers. This cylinder will also fit Challenger 4700 Series, Holmes 440 Series/ DFT 400, and Holmes HP 552 / DFT 650 Series light duty wreckers. Standard cylinder color is black. To view part schematics click on the Brochure tab.

• This Homac cylinder is designed to be used on 1989 - 1997 Formula 1 and WL-300 equipment without a valve
• Replaces <a href="http://zips.com/parts-detail/replaced-by-12-0302341- cylinder-12-0301484" target="_blank"/>12-0301484</a/>
• Seal Kit # <a href="https://zips.com/parts-detail/miller-seal-kit-bed-tilt-cylinder-centur-12-03000017" target="_blank"/>12-03000017</a/>
  
  Fits:
• Miller 10 Series Carrier 02/2001 to Current
• Standard and Right Approach 10 Series Carriers
• Fits Challenger 4700 Series (02/1995 - Current)
• Fits Holmes 440 Series / DFT 400 (10/1994 - Current)
• Fits Holmes HP 552 / DFT 650 (09/1994 - Current)

This is the Boom Lift Cylinder Lower Pin for a Century 400 & 600, Vulcan 880/890 and Vulcan Modular 880/890 light duty wrecker by Miller Industries. This pin connects the lift cylinder to the subframe for the wrecker. To see which specific wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is a Miller cylinder, 812 claw. generation 3.

This is the Lower Cylinder Pin on the Lift Cylinder on Century Formula I Duplex Tilt 411 & 412 wreckers. This pin also fit the Century Formula 6000 - 600 Series wrecker. To view part schematics click on the Brochures tab.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This Cotter Pin from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

This is the Fold Cylinder Upper Pin for the base end of the cylinder on Century Modular 211, Vulcan Modular 804, Modular 806 and Modular 807 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the boom of the wrecker. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Boom Lift Cylinder Pivot Pin for Century 614 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the wrecker frame weldment allowing the cylinder to pivot as the boom goes up and down. To see which models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This pin is used to connect the wheel lift extend cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

This is the Right Wheel Lift Tilt Cylinder for the Century Formula 6500 - 600 Series wrecker and the Modular 400 & 600 Series wreckers by Miller Industries. To view part schematics click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This hydraulic wheel lift tilt cylinder is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Standard cylinder color is black. This tilt cylinder will fit both car carriers and light duty wreckers. It will fit Gen II 10 Series Miller Carriers, which includes Century, Holmes, Vulcan, Champion and Challenger including Right Approach Models.

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the rod end pin which is connected to the wheel lift. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

This is the Left Wheel Lift Tilt Cylinder for the Century Formula 6500 - 600 Series wrecker and the Modular 400 & 600 Series wreckers by Miller Industries. To view part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder on the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder connects the inner and outer wheel lift boom weldments together. This cylinder is what extends the wheel lift stinger out and in. To see which specific models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is a clevis pin that attaches the boom lift cylinder to both the boom and the wrecker itself. This pin is used to attach boom lift cylinder IT27B on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, Champion 101 Series, and Holmes 440 Series. To view part schematics Click on the Brochures tab.

This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the lower pin and it goes through the rod end of the cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Upper Tilt Cylinder Pin on the wrecker boom of Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series and the Champion Model 101. To view related parts see Features below. To view part schematics click the Brochures Tab.

This is the Wheel Lift Fold Cylinder for a Century Midnight Express. This is the cylinder the folds your wheel lift up towards the wrecker's boom. To view the part schematic click on the Brochure tab.

This is a Southern Seal Kit for the Wheel Lift left and right Tilt Cylinders on the Century 712 & 716 Series light duty wreckers by Miller Industries. The tilt cylinder part numbers for the wheel lift are 12-0303102 and 12-0303103. These cylinders got replaced by part number 12-0307117.

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the base end pin which is connected to the tower/boom. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

This is the Wheel Lift Tilt Cylinder Pin on the wheel lift of the Century 614 FIIT Aluminum Body light duty wrecker by Miller Industries. This pin is used on the base end of the tilt cylinder. This is the pin that connects the wheel lift tilt cylinder to the FII/T wheel lift frame. To view the part schematic click on the Brochure tab.

This is the Wheel Lift Extend Cylinder for Century and Holmes Light Duty Wreckers by Miller Industries. This extend cylinder will fit the Century EB4 6500, Formula 6500 - 600 Series, Modular 400 & 600 and the 614 Wrecker Formula IIT. It will also fit the Holmes HP 552 / DFT 650. To view the specific year range of these models see Features below. To view part schematics click on the Brochures tab.