Cylinder and Pin Replacement

This is the Wheel Lift Tilt Cylinder for the Vulcan Modular 880 / 890 light duty wreckers by Miller Industries. This tilt cylinder has a 4" bore with a 12.31" stroke. This cylinder attaches to the wrecker subframe and to the wheel lift outer boom weldment. This is the cylinder that tilts the wheel lift on your wrecker up and down. Please see the brochure tab for breakdown.

This is the Wheel Lift Tilt Cylinder on the Century 614 FIIT Aluminum Body, the Century 614 Formula IIT and the Century 712 & 716 Formula IIIT light duty wreckers by Miller Industries. This tilt cylinder replaces the part numbers 12-0303102 (left tilt cylinder) and 12-0303103 (right tilt cylinder). This is the cylinder that tilts the boom of your wheel lift up and down. To see specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Boom Lift Cylinder on Century Midnight Express Series by Miller Industries. This is the cylinder that lifts your wrecker's boom up and down. To view part schematics click on the Brochure tab.

This is a 6 1/4" Miller universal gas spring great for opening and holding toolbox doors.

This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.

This is the Lift Cylinder Lower Pin on the Century 614 Series light duty wreckers with Formula II wheel lifts by Miller Industries. This pin goes through the rod end of the lift cylinder. This is the pin that connects the lift cylinder to the wheel lift outer boom weldment. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder for the Vulcan 880 / 890 and 896 / 897 Series light duty wreckers by Miller Industries. This cylinder attaches to the outer wrecker boom weldment and the subframe of the wrecker. This cylinder raises the boom of your wrecker up and down. This cylinder can also be referred to as the boom elevation cylinder. To see which specific models this lift cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder for Century 712 & 716 Series light duty wreckers by Miller Industries. This Cylinder connects the inner and outer wheel lift boom weldments together allowing the wheel lift boom to slide in and out. To view the part schematic click on the Brochure tab.

This is the Lift Cylinder Pin on the I-600 Wheel Lift on the Challenger 4800 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the lift cylinder to the wheel lift frame weldment. To view the part schematic click on the Brochure tab.

Note: Special Handling Fees Apply

This is the Boom Lift Cylinder on the Century 411 and 412 Series wreckers. It will also fit on the Vulcan Modular 880 and 890 Series light duty wrecker by Miller Industries. This is the cylinder that raises the boom of your wrecker up and down. It is also sometimes called the Boom Elevation Cylinder. To view specific wrecker models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

<pre/>Fits:

Century Modular 400 & 600 (01/2009 - Current)

Vulcan Modular 880 / 890 (06/1999 - Current)

</pre/>

This is the Lift Cylinder for the Wheel Lift on the Century 712 & 716 Series light duty wreckers with a Formula III wheel lift. This is the cylinder that raises your wheel lift boom up and down. This cylinder replaces part number 12-0303101 (which is no longer available).

This is a replacement cylinder for the rear stabilizers on a Chevron Renegade 408 model wrecker.

This is the Wheel Lift Extend Cylinder for the Wheel Lift on the Century Midnight Express and Modular Midnight Express Series. To view wrecker models this cylinder will fit see Features below. To view part schematics click on the Brochures tab.

This is the Tilt Cylinder on the Holmes DFT-200 Wheel Lift by Miller Industries. This is the cylinder that tilts the wheel lift on your wrecker up and down. This cylinder has a 5" bore. This part can be used to replace Part Number GR-3C.

This is the Boom Lift Cylinder Base Pin on the Century Modular 211, Vulcan Modular 804 and Vulcan Modular 806 light duty wreckers by Miller Industries. This pin connects the Boom Lift Cylinder to the subframe assembly. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder for the Vulcan 805, Vulcan 806, and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that raises the wrecker boom up and down. This cylinder attaches to the wrecker subframe weldment and to the wrecker outer boom weldment. This cylinder is also referred to as the boom elevation cylinder. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Boom Lift Cylinder on Century Modular 211, Modular 400 & 600, Vulcan Modular 804 and Vulcan Modular 880 / 890 light duty wreckers by Miller Industries. This lift cylinder has a 3.5" bore and a 17.75" stroke. This is the cylinder that raises the boom of your wrecker up and down. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder Pin on the Challenger 4800 Series light duty wreckers by Miller Industries. This pin goes through the base end of the extend cylinder. This pin connects the wheel lift extend cylinder to the outer wheel lift boom weldment. To view the part schematic click on the Brochure tab.

This is the Boom Extend Cylinder for wrecker booms on light duty wreckers by Miller Industries. This extend cylinders has a 2.5" Bore and a 60" Stroke. This cylinder will fit on Century Formula I Duplex Tilt 411, 412, Super Six, and 500 Series, Century Formula 6000 - 600 Series, Century 614 FIIT Wrecker, Challenger 4700 and 4800 Series, and Holmes 440 Series. To view specific wrecker models see Features below. To view part schematics click the Brochures tab.

This is a Seal Kit for the Wheel Lift Extend Cylinder on the Century 712 & 716 Series light duty wreckers by Miller Industries. This seal kit is used on extend cylinder part number, HD130. To view the part schematic click on the Brochure tab.

This is a Boom Lift Cylinder for wrecker booms on Century and Holmes Light Duty Wreckers by Miller Industries. This lift cylinder will fit the Century Formula I Duplex Tilt 411 and 412, and the Holmes HP 552 / DFT 650. This cylinder replaces cylinder part numbers: 12-0302218 and 12-0302356. To view part schematics click the Brochures tab.

This Bushing from Miller Industries is used on Wheel Lift Tilt Cylinder

This is a Boom Lift Cylinder Pin for the boom of the Century Midnight Express by Miller Industries. This is the base end pin for the lift cylinder. To view the part schematic click the Brochure tab.

This is the Boom Lift Cylinder Upper Pin for Century 614 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the outer wrecker boom weldment allowing the cylinder to pivot as the boom goes up and down. To see which models this pin will fit please see Features below. To view part schematics click on the Brochure tab.