Light Duty Wrecker Parts

This is a 1" Snap Ring by Miller Industries. This snap ring is used on the wheel lift extend cylinder pin. This snap ring secures the pin in place. To view the part schematic click on the Brochure tab.

This is a replacement Seal Kit for Wheel Lift Fold Cylinder 12-0302919.

This is the weldment pin that connects the outer stinger to the parallel arms on a Formula I 411/412 by Miller Indstries. See brochure for reference chart.

Replacement Auto Grip Claw Cylinder for Chevron second generation 2003 and up. Left hand claw cylinder.

This is a Jerr-Dan rod, controls .75 DIA x 9.00.

Note: Special Handling Fees Apply

This is the Lift Cylinder on the Wheel Lift of Century Wreckers with the Formula I and Formula 6500 Wheel Lifts. It is used on the Century Formula 6500 - 600 Series and the Modular 400 & 600 Series with these wheel lift options. To view part schematics click the Brochure tab.

• Uses holding valve part number <a href="http://zips.com/parts-detail/holding -valve-sterling-12-0304567" target="_blank"/>12-0304567</a/>
  
  Fits:
• Century Formula 6500, 600 Series REV A
• Century Modular 400 & 600 (01/2009 - Current)

Miller Cast Iron D-ring commonly used with small wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Retaining Pin for Installation (Part #BA0259).

This is the Wheel Lift Extend Cylinder Base End Pin for Century Modular Midnight Express and Modular 211's. This pin also will fit Holmes 440SL, Vulcan Modular 804, 806, and 807 wreckers. It will also work with the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. To view specific models see Features below. To view part schematics click the Brochure tab.

Note: Special Handling Fees Apply

These 3" wide Fender Flares from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. They will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. These fender flares do not fit the early 401-402 or other straight sided Century bodies. Sold as Pairs (One Left & One Right).

Cannot ship by mail.

• Here's the finishing touch for your wrecker!
• Custom designed for a perfect fit on a variety of popular wrecker body styles
• These flares can be painted to match
• Easy installation
• Create a clean custom look
• They fit light and medium duty wrecker bodies
• Priced per pair
• 3" wide
• Body Accessory for Century 411-412 & 601-602
• Do Not Fit the Early 401-402 or Other Straight Sided Century Bodies
• Old Part Number: PBF10

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the outer boom weldment of the wheel lift. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

This is the base lift cylinder pin on the wheel lift of Century, Challenger and Holmes wreckers by Miller Industries. This pin replaces part number 12-0801012. This cylinder pin will fit the following wreckers: Century Formula I - Duplex Tilt 411 & 412, Formula I - Duplex Tilt Super Six & 500, Formula 6000 - 600 Series, Formula 6500 - 600 Series, Metro I - Duplex Tilt, Challenger 4700 Series, and the Holmes 440 Series. To view year ranges see Features below. To view part schematics click on the Brochures tab.

Special high grade weather-resistant industrial rubber fender for trucks, busses, tankers and trailers. After a brush against a wall, loading dock, or another vehicle, rub-a-fenders return to original shape. Solve legal width problem - easily installed - always attractive. Approved for use by leading truck and bus body fabricators. The fenderette extends 2 1/4 inches beyond the body side.

The boom end assembly guides the cable from the winch off of the end of the boom. This assembly comes complete with the yoke, sheave wheel, cable guide and pin. This is designed for the Century light duty wrecker models 411, 412, 601, 602. Fits the 611 and 612 2000 year model and older. This boom end will also fit on Challenger 4300 Series and Holmes 440, 552 and DFT 650 Series Wreckers. See Brochures for part schematics and Features to see what models with boom end will fit.

Miller Industries Mounting Pin for the Small Wrecker D-Ring (Part #12-0712380) used on Small Wreckers including Century 311/312, Century 602/612, Vulcan 880 Series, Holmes 440 Series, Challenger Century and others. Requires Part #HD0106 Roll Pin for Installation.

This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.

This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.

This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.

This is the seal kit for the wheel lift tilt cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. To view part schematic click on the Brochure tab.

This is the sheave assembly for Century, Holmes, and Vulcan Light Duty wreckers. See Brochures for part schematics and Features to see what models this sheave assembly will fit.

This is a newer style Miller Industries Control Handle Knob (older Style # 12-0301428). It is grey in color and is labeled "Up/Down" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.

Note: Special Handling Fees Apply

This is the extend cylinder for the wheel lift on Miller Industries Light Duty Wreckers. This will fit the Century EB4 Express, Century Formula I 411 & 412, Century Formula I Super Six & 500 Series, Century Formula II, Century Formula 6000 - 600 Series, Century Metro I, Century Modular 211, Century Modular 400 & 600, Century 211 & 212. It will also fit the Challenger 4700 Series, Champion Model 101, Holmes 440 Series, Vulcan Modular 804, and Vulcan Modular 806. To view specific years of wrecker models see Features below. To view part schematics click on the Brochures tab.

Dimensions: 39"L x 5"W x 5"H

Length Eye to Eye: 37.5" L
Fits:

Century EB4 Express (03/1999 to Current)

Century Formula I, Duplex Tilt, 411 & 412 Wreckers

Century Formula I, Duplex Tilt, Super Six & 500 Series

Century Formula II

Century Formula 6000, 600 Series

Century Metro I, Duplex Tilt (D.T.) Wheel Lift System

Century Modular 211 (02/2010 to Current)

Century Modular 400 & 600 (01/2009 - Current)

Century 211 & 212 (11/1997 to Current)

Challenger 4700 Series (02/1995 - Current)

Champion Model 101 (09/1994 - Current)

Holmes 440 Series / DFT 400 (10/1994 - Current)

Vulcan Modular 804 (02/2010 - Current)

Vulcan Modular 806 (02/2010 - Current)

This is the Wrecker Boom Lift Cylinder on the Holmes 440SL, Vulcan 810 Intruder, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 3.5" bore with a 10.44" stroke. This lift cylinder connects to the subframe weldment and to the outer wrecker boom weldment. This is the cylinder that raises the boom of the wrecker up and down. This lift cylinder is also referred to as the boom elevation cylinder. To see which specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

This is a replacement hydraulic tube assembly for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This is a 3/8" hydraulic tube assembly that gets used on the Extend and Tilt cylinders on these wreckers. This tube assembly will fit Vulcan 896/897, 880/890, and Modular 880/890 light duty wreckers. To view which specific models this part will fit please see Features below. To view part schematics click on the Brochure tab above.

This is rubber fender well material from Miller Industries. This material is sold by the foot.

This is a replacement hydraulic tube assembly for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This is a 3/8" hydraulic tube assembly that gets used on the Extend and Tilt cylinders on these wreckers. This tube assembly will fit Vulcan 896/897, 880/890, and Modular 880/890 light duty wreckers. To view which specific models this part will fit please see Features below. To view part schematics click on the Brochure tab above.