Light Duty Wrecker Parts

This is a Seal Kit for the boom lift cylinder on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, and Champion Model 101 Wreckers by Miller Industries. To view part schematics please click on the Brochures tab.

This is a control lever on light duty wreckers by Miller Industries. It is a universal control rod for light duty wreckers and is bare metal (no coating). See Features for related wreckers and Brochures for reference charts.

This is the Upper Pin for the Wheel Lift Tilt Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin is used to connect the tilt cylinder to the subframe assembly. To view the specific wrecker models see Features below. To view part schematics click on the Brochures tab.

This is the Wheel Lift Tilt Cylinder on Century, Challenger, and Holmes Light Duty Wreckers. This cylinder will fit Century Formula I Duplex Tilt 411, 412, Super Six and 500 Series wreckers. It will also fit the Century Formula 6000 - 600 Series, Metro I - Duplex Tilt, Modular 400 and 600 Series. It fits the Challenger 4700 Series and the Holmes 440 Series. This tilt cylinder can be used on both the left and the right side of the wheel lift. This cylinder replaces part numbers: 12-0302905, 12-0302904, 12-0303674, and 12-0303675. To view specific wrecker models this cylinder fits see Features below. To view part schematics click the Brochures tab.

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is for the rod end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

Note: Special Handling Fees Apply

This 3" wide Left Fender Flare from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. The flare keeps mud and debris from being thrown onto a nice paint job or on th e towed vehicle. The addition of fender flare will help the truck comply with certain state tire exposure regulations. This fender f lare does not fit the early 401-402 or other straight sided Century bodies.

Cannot ship by Mail.

• Left Fender Flare
• 3" Wide
• Fits Century 400 & 600 Series Wrecker Bodies
• Here's the finishing touch for your wrecker!
• Custom designed for a perfect fit on a variety of popular wrecker body styles
• Paint-to-match
• Installs in minutes for a clean custom look

This Lower-Tilt Cylinder Shaft is used on Boom and Underlift Assembly of Light Duty Wreckers from Miller. These include Century, Challenger, Champion and Eagle Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdown schematics.

This is a multi-position pin.

This is the Wheel Lift Fold Cylinder for the Wheel Lift on the Vulcan 812 Intruder and Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This cylinder has a 4" bore with a 19.5" stroke. This cylinder attaches to the wrecker outer boom weldment and to the wheel lift outer boom weldment. This is the cylinder that folds the wheel lift up against the boom of the wrecker for travel. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is the Seal Kit for the Lift Cylinder on the wheel lift of the Century Formula 6500 - 600 Series and Holmes 552 / DFT 650 light duty wreckers by Miller Industries. The part number for the lift cylinder is 12-0303065. To see which specific models this seal kit fits please see Features below. To view part schematics click on the Brochure tab.

33" Tall Aluminum Light Pylon from Miller Industries. Installation Includes a plastic isolator between the pylon and the body. This light pylon fits on Chevy 3500's without tunnel toolbox, For F-350 through F-450's without tunnel toolbox, and Dodge 3500 through 5500 without tuneel toolbox. This part can be used to replace Part Number 124002343.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 810 Intruder light duty wrecker by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the wheel lift tilt cylinder to the wheel lift outer boom weldment. To view the part schematic click on the Brochure tab.

This is a Miller Industries Control Handle Knob. It is grey in color and is labeled "Open/Close" for the wheel lift autoload claw operations. See Features for related wreckers and Brochures for reference charts.

The original rubber fenderette for the Holmes 600 & 750. This fenderette is preformed for the round wheel opening and is cut to length.

This is the Wheel Lift Tilt Cylinder Upper Pin on the Wheel Lift of a Century Modular 400 & 600 Series, Vulcan 880/890, Vulcan Modular 880/890 and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This pin connects the wheel lift's tilt cylinder to the wheel lift frame weldment. To view which wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.

This is a seal kit for the boom lift cylinder on Century Light Duty Wreckers by Miller Industries. This seal kit will fit the Century Formula I Duplex Tilt Super Six and 500 Series, and The Formula 6000 - 600 Series. To view part schematics click on the Brochures tab.

This Fold Up/Down Control Knob from Miller Industries is Red in color with White lettering on the top. It is used on the Control Assembly of several Miller Wreckers. These include Century, Challenger and Vulcan Wreckers. See the features below for a full list of wreckers and see the brochure tab for breakdowns.

This is the Wheel Lift Tilt Cylinder for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This cylinder allows your wheel lift to tilt up and down. This cylinder connects to the wheel lift tilt column and the subframe of the wrecker. To view the part schematic click on the Brochure tab.

This is the Boom Sheave Yoke Shaft for Century Midnight Express and Holmes 440 HP Wreckers by Miller Industries. It will also fit the Century Modular Midnight Express. This is the Shaft that holds the sheave in the boom end yoke. See Brochures for reference charts and Features for related parts and what models this shaft will work with.

This is a Fiberglass Fender Flare for the rear on a Jerr-Dan Wrecker. It is 4" wide and will fit 1993 - current wreckers. Sold as a pair. One Left and One Right.

This Commercial P315 Series Hydraulic Clutch Pump is commonly used for engine mounted applications. It is a cast iron, belt driven, Commercial P315 Series fixed displacement gear pump with Pitts Electro-Magnetic Clutch. This pump has a tapered and keyed shaft that accepts the 1172 Electric Clutch Assembly or the 1172S Serpentine Electric Clutch Assembly. Pump will also accept 740148 Serpentine Electric Clutch Assembly. This pump is rated at 7 GPM @ 2000RPM

Note: Special Handling Fees Apply

This hydraulic wheel lift up/down cylinder is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. This cylinder has a 4" bore. This cylinder will work with wheel lift applications on both car carriers and light duty wreckers by Miller Industries. This cylinder is designed to be used on 1989 - 1997 Formula I and WL-300 equipment without a valve. This lift cylinder fits Miller 10 Series Carriers from 2001 to Current and Standard and Right Approach 10 Series Carriers. This cylinder will also fit Challenger 4700 Series, Holmes 440 Series/ DFT 400, and Holmes HP 552 / DFT 650 Series light duty wreckers. Standard cylinder color is black. To view part schematics click on the Brochure tab.

• This Homac cylinder is designed to be used on 1989 - 1997 Formula 1 and WL-300 equipment without a valve
• Replaces <a href="http://zips.com/parts-detail/replaced-by-12-0302341- cylinder-12-0301484" target="_blank"/>12-0301484</a/>
• Seal Kit # <a href="https://zips.com/parts-detail/miller-seal-kit-bed-tilt-cylinder-centur-12-03000017" target="_blank"/>12-03000017</a/>
  
  Fits:
• Miller 10 Series Carrier 02/2001 to Current
• Standard and Right Approach 10 Series Carriers
• Fits Challenger 4700 Series (02/1995 - Current)
• Fits Holmes 440 Series / DFT 400 (10/1994 - Current)
• Fits Holmes HP 552 / DFT 650 (09/1994 - Current)

This is the Boom Lift Cylinder Lower Pin for a Century 400 & 600, Vulcan 880/890 and Vulcan Modular 880/890 light duty wrecker by Miller Industries. This pin connects the lift cylinder to the subframe for the wrecker. To see which specific wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is a dual control cable clevis for light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.