Light Duty Wrecker Parts

This is a Boom Wing Cable Guide Kit from Zip's Truck Equipment. These wing cable guides will help guide the winch cable from the boom end back to the winch without it hanging down and scratching up your boom. This kit consists of 2 boom wings, one measures 27" and the other measures 32" long.

This 4" wide Fiberglass Fender Flare from Phoenix USA for Century 411 - 412 and 601 - 602 bodies will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flare will help keep mud and debris from being kicked up onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sod as Each (One Right Rear).

These fiberglass Fender Flares are application specific for a perfect fit and can be painted to match your truck for a truly custom look. Available in multiple widths, they install in just minutes. No hardware included. Sold in pairs.

Note: Special Handling Fees Apply

This is the Inner Stinger Boom Weldment for the Wheel Lift of a Vulcan 880/890 and Modular 880/890 by Miller Industries. See Brochures for part schematics and Features to see what models this will fit.

<pre/>Fits:

Vulcan 880 / 890 (03/2008 - Current)

Vulcan Modular 880 / 890 (06/1999 - Current)

</pre/>

This is a Miller cylinder, 812 claw. generation 3.

This is the Lower Cylinder Pin on the Lift Cylinder on Century Formula I Duplex Tilt 411 & 412 wreckers. This pin also fit the Century Formula 6000 - 600 Series wrecker. To view part schematics click on the Brochures tab.

This is the Wheel Lift Tilt Cylinder Lower Pin for the Vulcan 812 Intruder and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin attaches the tilt cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.

This is a bushing for a control handle on Vulcan and Century light duty wreckers by Miller Industries. It is flanged and is dimensioned at 3/4" x 7/8" x 3/4". See Features for related wreckers and Brochures for reference charts.

This Cotter Pin from Miller Industries is used on the Winch Clutch Control of 4-Ton Hydraulic Winches,

This is a cross control arm on light duty wreckers by Miller Industries. It is a universal cross control arm for light duty wreckers and is bare metal (no coating). See Features for related wreckers and Brochures for reference charts.

This is the Fold Cylinder Upper Pin for the base end of the cylinder on Century Modular 211, Vulcan Modular 804, Modular 806 and Modular 807 light duty wreckers by Miller Industries. This is the pin that connects the fold cylinder to the boom of the wrecker. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

* Use with 945030007 Spring * Use with 9048800 Link

This is the Boom Lift Cylinder Pivot Pin for Century 614 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the wrecker frame weldment allowing the cylinder to pivot as the boom goes up and down. To see which models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder Front Pin for the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This pin is used to connect the wheel lift extend cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.

This is the Right Wheel Lift Tilt Cylinder for the Century Formula 6500 - 600 Series wrecker and the Modular 400 & 600 Series wreckers by Miller Industries. To view part schematics click on the Brochure tab.

This is the Wrecker Boom Lift Cylinder Upper Pin for the Vulcan 805, Vulcan 806, Vulcan 807 Auto Grip, and Vulcan 810 Intruder light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the lift cylinder to the outer wrecker boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is a long extension rod for a control rod on light duty wreckers by Miller Industries. It is 5 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts.

This hydraulic wheel lift tilt cylinder is designed to withstand necessary forces and to be used at stated pressures. It meets industry and government specifications and will prove itself on the job when it really matters. Standard cylinder color is black. This tilt cylinder will fit both car carriers and light duty wreckers. It will fit Gen II 10 Series Miller Carriers, which includes Century, Holmes, Vulcan, Champion and Challenger including Right Approach Models.

These are the roll pins for the sheave boom yoke shaft on the Midnight Express by Miller Industries. Click on the brochure tab for a reference chart.

This 4" wide Fiberglass Fender Flare from Phoenix USA for Century 411 - 412 and 601 - 602 bodies will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flare will help keep mud and debris from being kicked up onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sod as Each (One Left Rear).

This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the rod end pin which is connected to the wheel lift. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.

This is the Boom End Swivel for many light duty wreckers by Miller Industries. It will fit on most Century, Challenger, Champion and Holmes wreckers. See Brochures for a reference chart and Features for related parts and what models this part fits on.

10 gallon per minute hydraulic pump at 1000 rpm. Commonly used with the 250/251 series Chelsea PTO's. When used with the 122% output speed pto this pump will deliver 12.20 gallons per minute. This pump when combined with the 251GDHVP-B5XE pto kit on a Chevrolet/GMC K30 chassis will provide the maximum g.p.m. output for the allowed chassis pto/pump area.

This is the Left Wheel Lift Tilt Cylinder for the Century Formula 6500 - 600 Series wrecker and the Modular 400 & 600 Series wreckers by Miller Industries. To view part schematics click on the Brochure tab.