Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Properly maintain your light-duty wrecker with replacement parts from Zip’s AW Direct. We carry parts for your hydraulic system, cable guides, control valve bodies and related hardware. We also stock body lights and light pylons plus fender flares to control debris flying off your tires.
This 2.5" Fiberglass Fender Flare from Phoenix USA for Dynamic Wrecker Bodies will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flare will help keep mud and debris from being kick up onto a nice paint job or on the vehicle that you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each (One Right Rear).
This is the Wheel Lift Extend Cylinder on the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder connects the inner and outer wheel lift boom weldments together. This cylinder is what extends the wheel lift stinger out and in. To see which specific models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.
This is a clevis pin that attaches the boom lift cylinder to both the boom and the wrecker itself. This pin is used to attach boom lift cylinder IT27B on Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series, Champion 101 Series, and Holmes 440 Series. To view part schematics Click on the Brochures tab.
This Phoenix Fiberglass Rear Body Fender Flare is a body accessory for the Dynamic body. This Fender Flare is 2.5" and they are sold as Pairs. One Left and One Right.
This is the Lower Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the lower pin and it goes through the rod end of the cylinder. This cylinder connects the lift cylinder to the wheel lift outer boom weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Upper Tilt Cylinder Pin on the wrecker boom of Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century 211 & 212, Challenger 4300 Express Series and the Champion Model 101. To view related parts see Features below. To view part schematics click the Brochures Tab.
This is the Wheel Lift Fold Cylinder for a Century Midnight Express. This is the cylinder the folds your wheel lift up towards the wrecker's boom. To view the part schematic click on the Brochure tab.
This is a Southern Seal Kit for the Wheel Lift left and right Tilt Cylinders on the Century 712 & 716 Series light duty wreckers by Miller Industries. The tilt cylinder part numbers for the wheel lift are 12-0303102 and 12-0303103. These cylinders got replaced by part number 12-0307117.
This is a control rod for the wheel lift on the Vulcan 880 and 890 Series by Miller Industries. See Features for related wreckers and Brochures for reference charts.
This is a Fold Cylinder Pin for the Wheel Lift of a Century Midnight Express by Miller Industries. This is the base end pin which is connected to the tower/boom. This pin is used with fold cylinder part number, 12-0715886. To view the part schematic click the Brochure tab.
This is a replacement 72" control cable for a Holmes wrecker from Protech. This cable will work for the "Boom" or "Winch" functions. The cable has a 2" stroke and works with Holmes wreckers with modular controls.
These 3" wide Fender Flares from Phoenix USA for a Challenger 4700 and a Holmes 460 body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).
This is the Wheel Lift Tilt Cylinder Pin on the wheel lift of the Century 614 FIIT Aluminum Body light duty wrecker by Miller Industries. This pin is used on the base end of the tilt cylinder. This is the pin that connects the wheel lift tilt cylinder to the FII/T wheel lift frame. To view the part schematic click on the Brochure tab.
This 4" wide Fender Flare from Phoenix USA for a Challenger 4700 and a Holmes Wrecker body will add a custom look to your wrecker. It will provide excellent coverage over your rear tires. These fender flares will help keep mud and debris from being kicked up on your paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each.
This is the Wheel Lift Extend Cylinder for Century and Holmes Light Duty Wreckers by Miller Industries. This extend cylinder will fit the Century EB4 6500, Formula 6500 - 600 Series, Modular 400 & 600 and the 614 Wrecker Formula IIT. It will also fit the Holmes HP 552 / DFT 650. To view the specific year range of these models see Features below. To view part schematics click on the Brochures tab.
This is the hydraulic hose tension pulley on the Century 300 Express, EB4 Express, and Challenger 4300 Express Series by Miller Industries. See Brochures for part schematics and Features for related parts and to see what models this fits.
This is the Wheel Lift Tilt Cylinder Upper Pin on the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.
This is the Boom Lift Cylinder Upper Pin on the Century Modular 211, Modular 400 & 600 Series, Vulcan Modular 804, Vulcan 880/890 Series and the Vulcan 896/897 Series light duty wreckers by Miller Industries. This is the pin that goes through the rod end of the cylinder and connects the lift cylinder to the boom of the wrecker. To view specific wrecker models this pin fits please see Features below. To view part schematics click on the Brochure tab.
This is a 1-1/4" cotter pin used in many applications. Some common applications for this pin is to secure the boom lift cylinder on the cylinder pin on the Holmes HP 552 light duty wrecker by Miller Industries. This pin also works with wheel lift cylinder pin on the Vulcan Modular 880/890 series by Miller Industries. To see which specific wrecker models this cotter pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This is the Upper Lift Cylinder Pin on the Wheel Lift of the Vulcan 880 / 890 Series and the Modular 880 / 890 Series light duty wreckers by Miller Industries. This is the upper pin and it goes through the base end of the cylinder. This cylinder connects the lift cylinder to the wheel lift tilt column weldment. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This is a replacement control knob kit for the Century 400 / 600 Series light duty wreckers by Miller Industries. This knob kit is for a single winch setup on your wrecker. To view the part schematic please click on the Brochure tab above.