Light Duty Wrecker Parts

This is the Wrecker Boom Lift Cylinder for the Vulcan 880 / 890 Series light duty wreckers by Miller Industries. This cylinder attaches to the outer wrecker boom weldment and the subframe of the wrecker. This cylinder raises the boom of your wrecker up and down. This cylinder can also be referred to as the boom elevation cylinder. To view the part schematic click on the Brochure tab.

This is a crossrod on light duty wreckers by Miller Industries. It can be located as the back two crossrods within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

This is a 3/4-11 Spline Ford PTO pump. It will fit 245FMKSP-B2XP PTO. The CGP-P11 series pumps can be ran on 4X4 or 4X2 vehicles. It is a 20.4 HP pump. It has a 3480 PSI intermittent pressure rating and a 3410 PSI continuous pressure rating. Max pump speed is rated at 1850 RPM with the max engine speed rated at 1201 RPM. The max pump flow is rated at 10.3 GPM.

This is the Fold Cylinder that folds up the wheel lift on Miller Industries Light Duty Wrecker. This cylinder will fit on Century 300 Express Series, EB4 Express, EB4 6500, Modular 300 Express Series, Modular 211, 211 & 212, Challenger 4300 Express Series, and Vulcan Modular 804, 806 and 807 wreckers. To view part schematics click the Brochures Tab.

This is the Wheel Lift Tilt Cylinder Pin for the I-600 Wheel Lift on the Challenger 4800 Series light duty wreckers by Miller Industries. This pin goes through the rod end of the tilt cylinder. This pin connects the tilt cylinder to the outer wheel lift boom weldment. To view the part schematic click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder for the Vulcan 806 and Vulcan 807 Auto Grip light duty wreckers by Miller Industries. This is the cylinder that tilts the wheel lift of your wrecker up and down. This cylinder is attached to the wrecker outer boom weldment and the wheel lift outer boom weldment. To see which specific wrecker models this cylinder will fit please see Features below. To view the part schematics click on the Brochure tab.

This is an outer control rod for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a upper tilt cylinder pin for a Holmes 220 Snatcher.

This is a 2.5" Fiberglass Fender Flare from Phoenix USA for a Dynamic Wrecker Body that will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. Fender Flares help keep mud and debris from being kicked up onto your nice paint job or on the vehicle that you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each (One Left Rear).

This is the seal kit that is need to replace the seal of the lift cylinder on Century 614 light duty wreckers with Formula II wheel lifts by Miller Industries. The lift cylinder part number that this seal kit is for is 12-0303884. To see which specific models this seal kit will fit please see Features below. To view part schematics click on the Brochure tab.

This is a crossrod on light duty wreckers by Miller Industries. It can be located as the center rod within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

33" Tall Steel Light Pylon from Miller Industries. Installation Includes a plastic isolator between the pylon and the body. This light pylon fits on Chevy 3500's without tunnel toolbox, For F-350 through F-450's without tunnel toolbox, and Dodge 3500 through 5500 without tuneel toolbox.

This is the Wheel Lift Tilt Cylinder for the Vulcan Modular 880 / 890 light duty wreckers by Miller Industries. This tilt cylinder has a 4" bore with a 12.31" stroke. This cylinder attaches to the wrecker subframe and to the wheel lift outer boom weldment. This is the cylinder that tilts the wheel lift on your wrecker up and down. Please see the brochure tab for breakdown.

This is a control handle pivot rod on the Vulcan 807 and 880/890 Series by Miller Industries. See Features for related wreckers and Brochures for reference charts.

This is a long shifter valve on light duty wreckers by Miller Industries. It is 11 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 12-0800613.

This is a wheel lift crossrod on light duty wreckers by Miller Industries. It can be located at the 3rd or 5th rod within the control rod assembly. See Features for related wreckers and Brochures for reference charts.

This is the Wheel Lift Tilt Cylinder on the Century 614 FIIT Aluminum Body, the Century 614 Formula IIT and the Century 712 & 716 Formula IIIT light duty wreckers by Miller Industries. This tilt cylinder replaces the part numbers 12-0303102 (left tilt cylinder) and 12-0303103 (right tilt cylinder). This is the cylinder that tilts the boom of your wheel lift up and down. To see specific models this cylinder will fit please see Features below. To view part schematics click on the Brochure tab.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain. This part can be used to replace Part Number CF-181.

This is a Boom End Assembly for Century Wreckers by Miller Industries. This boom end will fit the EB4 Express, EB4 6500, Formula 6500 - 600 Series, 614 with a Formula IIT. See Brochures for part schematics and Features to see what models this boom end fits.

This is the Boom Lift Cylinder on Century Midnight Express Series by Miller Industries. This is the cylinder that lifts your wrecker's boom up and down. To view part schematics click on the Brochure tab.

This Control Station Guard from Miller Industries is used on the body assembly of Century, Challenger, Champion, Eagle and Holmes Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

Miller Industries 33" Aluminum Tubular Pylon. Available optional light pylonfor all Century and Vulcan small & medium wreckers. Requires work lights andsignals to be in the light bar. Powder Coated BLACK as Factory.

This is a 6 1/4" Miller universal gas spring great for opening and holding toolbox doors.

This is the Wrecker Boom Lift Cylinder Pin on the Holmes 440SL, Vulcan 812 Intruder, and the Vulcan 810 Power Tilt light duty wreckers by Miller Industries. This pin goes through the rod end of the lift cylinder. This pin connects the boom lift cylinder to the main boom of the wrecker. To see which specific models this pin will fit see Features below. To view part schematics click on the Brochure tab.

This is the Lift Cylinder Lower Pin on the Century 614 Series light duty wreckers with Formula II wheel lifts by Miller Industries. This pin goes through the rod end of the lift cylinder. This is the pin that connects the lift cylinder to the wheel lift outer boom weldment. To see which specific models this pin will fit please see Features below. To view part schematics click on the Brochure tab.