Light Duty Wrecker Parts

This is the Hair Pin for the Boom Lift Cylinder Pin. This hair pin keeps the clevis pin from pulling out and letting the cylinder fall off the boom.

This is the Boom Lift Cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. This cylinder raises and lowers the boom on your wrecker. To view the part schematic click on the Brochure tab.

This is a short shifter valve on light duty wreckers by Miller Industries. It is 4 1/2" in length and can be used for different applications on a light duty wreckers. See Features for related wreckers and Brochures for reference charts. This part can be used to replace Part Number 12-0800612.

This is a seal kit for 0307032.

This Seal Kit from Miller Industries is used on a Holmac Cylinder.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

This is the Lift Cylinder on the Wheel Lift of the Vulcan 880 / 890 Series and Modular 880 / 890 Series light duty wreckers by Miller Industries. This cylinder attaches to the wheel lift tilt column weldment and to the wheel lift outer boom weldment. This is the cylinder that raises your wheel lift on your wrecker up and down. To see which specific wrecker models this cylinder fits please see Features below. To view the part schematics click on the Brochure tab.

This is the Wheel Lift Extend Cylinder Pin for the Wheel Lift of the Vulcan 805 light duty wrecker by Miller Industries. This pin goes through the rod end of the cylinder. This pin is used to attach the wheel lift extend cylinder to the wheel lift inner boom weldment. To view the part schematic click on the Brochure tab.

This is a replacement wrecker boom lift cylinder for light duty wreckers by Miller Industries. This lift cylinder will fit Century 211/212, 300 Series, Challenger 4300 Express Series, Champion Model 101 and the Eagle light duty wreckers. To view the specific models this cylinder fits, see Features below. To view the part schematics, see the Brochure tab.

This is the Wheel Lift Extend Cylinder Pin for the Century Modular 400 & 600 Series and the 614 Formula IIT light duty wreckers by Miller Industries. This pin is 8.25" long with a center groove. This pin is for the base end of the extend cylinder. To see which wrecker models this pin will fit please see Features below. To view part schematics click on the Brochure tab.

This is the Wheel Lift Tilt Cylinder Pin on the wheel lift of the Century 614 FIIT Aluminum Body light duty wrecker by Miller Industries. This pin is used on the rod end of the tilt cylinder. This is the pin that connects the wheel lift tilt cylinder to the outer boom weldment of the FII/T wheel lift. To view the part schematic click on the Brochure tab.

This 2.5" Fender Flare from Phoenix USA for a 1993 - Current Steel Body Jerr-Dan Wrecker will add a clean, custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flare will help keep mud and debris from being thrown onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposures regulations. Sold as Each (One Right Rear).

This 4.5" Fender Flare from Phoenix USA for a 1997 - Current Chevron wrecker body will add a clean and custom look to your wrecker. They also will provide excellent coverage over your rear tires. The flares help keep mud and debris from being thrown onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each.

CONTROL CABLES BY CABLECRAFT. REPLACEMENT PUSH-PULL CONTROL CABLES FOR HOLMES AND CENTURY USES.

This boom support cable is a strong cable. Capable of handling up to 3,800 pounds, the All-Grip Boom Support Cable 7/16" x 43' has an EIP fiber core wire rope. This makes it extra durable.

This painted steel L-Arm fits the wheel lifts on Challenger Invader Series light-duty wreckers. Also known as a wheel retainer or tire restraint, this 1-1/2" x 2-1/2" L-Arm can be used on left or righthand crosstubes (Part Nos. RB0158 and RB0159). This part can be used to replace Part No. RB0121

This is a short extension rod for a control rod on light duty wreckers by Miller Industries. It is 3 1/2" in length and can be used for different applications on a light duty wrecker. See Features for related wreckers and Brochures for reference charts.

This is the boom lift cylinder mounting pin for the lift cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. The cylinder that uses this mounting pin is part number 12-0302357. To view the part schematic click the Brochure tab.

This 2.5" Fiberglass Fender Flare from Phoenix USA for a Chevron (1997 - Current) body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the vehicle that you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Each.

This is a Seal Kit for the Lift Cylinder on the Wheel Lift of the Century 712 & 716 Series light duty wreckers by Miller Industries. This seal kit is used with part number 12-0303101. To view the part schematic click the Brochure tab.

This is a Seal Kit for the Boom Lift Cylinder on Century 712 and 716 Series wreckers and the Holmes MD616T wrecker by Miller Industries. The part number for the boom lift cylinder that this seal kit is used on is 12-0302720. To see which specific models this seal kit will fit please see Features below. To view part schematics click on the Brochure tab.

This is a Hydraulic Boom Lift Cylinder for Century and Vulcan Light Duty Wreckers by Miller Industries. This lift cylinder has a 3" bore and a 17.75" stroke. This cylinder fits the Century Modular 300 Express Series and the Vulcan Modular 806 and 807 wreckers. To view part schematics click on the Brochures tab.

There are wreckers and older equipment that still require the use of Boom Support lines. These cables from All-Grip are the same as factory replacements. Constructed of 6 x 19 Eip Fibercore wire rope with a flemished thimbled eye at one end while the other end is plain.

This is a Seal Kit for the Boom Lift Cylinder on the Challenger 4700 Series light duty wreckers by Miller Industries. This seal kit includes all needed seals to revamp your leaky cylinder. This seal kit is used on boom lift cylinder part number, 12-0302966. To view the part schematic click on the Brochure tab.