Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Properly maintain your light-duty wrecker with replacement parts from Zip’s AW Direct. We carry parts for your hydraulic system, cable guides, control valve bodies and related hardware. We also stock body lights and light pylons plus fender flares to control debris flying off your tires.
This is a 1/4" x 1-3/4" Roll Pin that is used to secure the Swing L-Arm Pin on a Vulcan Modular 807 light duty wrecker by Miller Industries. To view the part schematic click on the Brochure tab.
This is the Wheel Lift Extend Cylinder Rear Pin for the Vulcan 800 Series light duty wreckers by Miller Industries. This includes the 880 / 890 Series, Modular 880 / 890 Series and the 896 / 897 Series. This pin is used to connect the wheel lift extend cylinder to the wheel lift inner boom weldment. To see which specific wrecker models this pin fits please see Features below. To view the part schematics click on the Brochure tab.
This is the Boom End Sheave Shaft on many Century, Challenger, Champion, and Holmes Light Duty Wreckers by Miller Industries. See Brochure for reference charts and Features for related parts and wrecker models this shaft will fit.
These 4.5" Fender Flares from Phoenix USA are for a 1997 - Current, Chevron Wrecker Body. They will add the finishing touch to your wrecker while giving it a custom appearance. These fender flares also provide excellent coverage over your rear tires. They keep mud and debris from being kicked up onto a nice paint job or on the vehicle you are towing. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).
This is the Wheel Lift Tilt Cylinder Pin for the Holmes 440 Series / DFT 400 light duty wreckers by Miller Industries. This pin goes through the rod end of the cylinder. This pin attaches the tilt cylinder to the outer wheel lift boom. To view the part schematic click on the Brochure tab. This part can be used to replace Part Number 12-0801010.
This is an angle iron used to bear all the control rods and to keep them in line on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.
This 3 Spool Control Valve from Miller Industries is used on Century, Challenger and Vulcan Wheel Lifts. It fits Vulcan 880/890, Century 411/412, 602/612, and Challenger 4700/4800 Wreckers.
42" Aluminum Tubular Pylon, Optional Light Pylon on Century 3212, Century 3212 CX2, Vulcan VX2, and Vulcan V30-VX body. Requires Work Lights and Signals to Be in the Light Bar.
This is a C-channel end iron used to bear all the control rods and to keep them in line on light duty wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.
This is the Wrecker Boom Lift Cylinder Pin for the Holmes 440SL, Vulcan 805, and Vulcan 810 Series light duty wreckers by Miller Industries. This pin goes through the base end of the lift cylinder. This pin connects the boom lift cylinder to the subframe weldment. To view part schematics click on the Brochure tab.
This is the Lift Cylinder Pin on the Wheel Lift for Century Formula 6500 - 600 Series and Century Modular 400 & 600 Light Duty Wreckers by Miller Industries. This is the pin for the rod end of the lift cylinder. To view specific models this pin will fit see Features below. To view part schematics click the Brochure tab.
This 4-Spool Control Valve from Miller Industries is used on Twin Line Wreckers. It is used on Century, Challenger and Vulcan Wheel Lifts made in 2008 or newer. See the features below for a list of wreckers.
This is an all aluminum 1.5" spacer for light duty tubular pylons. This spacerkit comes with all required mounting hardware and provides additional heightfor the pylon and light bar.
This is the fold cylinder lower pin on the wrecker boom of the Century Midnight Express and Vulcan 807 by Miller Industries. See Brochures for reference chart and Features for related parts.
This is a control rod bushing SSB-625 for the wheel lift on the Vulcan 880 and 890 Series wreckers by Miller Industries. See Features for related wreckers and Brochures for reference charts.
This is the Wheel Lift Tilt Cylinder Pin for the Vulcan 810 Power Tilt light duty wrecker by Miller Industries. This pin goes through the base end of the tilt cylinder. This pin attaches the tilt cylinder to the wrecker outer boom weldment. To view the part schematic click on the Brochure tab.
These 3.5" wide Fiberglass Fender Flares from Phoenix USA for a Chevron ('97 - Current) body will add a custom look to your wrecker. This is an old style medium width fender flare. It will also provide excellent coverage over your rear tires. The Flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).
This is the stinger pivot pin on the wrecker boom of the Century 211/212/300 Series by Miller Industries. See Brochures for reference chart and Features for related parts.
These 2.5" Fender Flares from Phoenix USA for a Vulcan 892 (1998 - Current) body will add a custom look to your wrecker. They also will provide excellent coverage over your rear tires. The flares keep mud and debris from being thrown onto a nice paint job or on the towed vehicle. The addition of fender flares will help the truck comply with certain state tire exposure regulations. Sold as Pairs (One Left & One Right).
This is a pivot pin for the Boom Extend Cylinder on many Miller Industries Light Duty Wreckers. This pin fits the Century 300 Express Series, Century Formula 6000 - 600 Series, Century Formula 6500 - 600 Series, Century Modular 400 & 600, Challenger 4300 Express Series, Challenger 4700 Series, Challenger 4800 Series, Eagle EB-3 Series, Holmes 440 Series, Holmes HP 552 & DFT 650, Vulcan Modular 806, 807, 880/890 wreckers. See Features below to view models this pin fits. To view part schematics click on the Brochures tab.
This is the Wheel Lift Tilt Cylinder Lower Pin on the Vulcan 880 / 890 Series and the Vulcan 896 / 897 Series light duty wreckers by Miller Industries. This pin is also used to attach the wrecker boom lift cylinder to the subframe weldment on the Vulcan 896 / 897 Series wrecker. To see which specific wrecker models this pin will fit please see Features below. To view the part schematics click on the Brochure tab.
This 3" wide Right Fender Flare from Phoenix USA for a Century 400 & 600 Series body will add a custom look to your wrecker. It will also provide excellent coverage over your rear tire. The flare keeps mud and debris from being thrown onto a nice paint job or on t he towed vehicle. The addition of fender flare will help the truck comply with certain state tire exposure regulations. This fender flare does not fit the early 401-402 or other straight sided Century bodies.
Cannot ship by mail.
Right Fender Flare
3" wide
Fits Century 400 & 600 Series Wrecker Bodies
Doesn't Fit Early 401-402 or Other Straight Sided Century Bodies
Here's the finishing touch for your wrecker!
Custom designed for a perfect fit on a variety of popular wrecker body styles
This is a Boom Sheave Yoke for a Century Midnight Express and Holmes 440 HP Wrecker by Miller Industries. It will also fit on the Modular Midnight Express. This boom sheave yoke holds the sheave which helps guide your cable from the winch to the boom. See Brochures for reference charts and Features for related parts and models this part will fit.
This Extend Cylinder Outer Boom Shaft from Miller Industries is used on many different assemblies on Century, Challenger, Holmes, and Vulcan Wreckers. These assemblies include boom, front outrigger, and wrecker assemblies. Please view the brochures tab to see a full list of wrecker assemblies and parts schematics.
This is the Seal Kit for the Lift Cylinder on the Wheel Lift of a Challenger 4700 Series and a Holmes 440 Series / DFT 400 light duty wrecker by Miller Industries. This seal kit is used on lift cylinder part number 12-0302341. To view part schematics click on the Brochure tab.