Winch Replacement Parts

OEM Factory Replacement Cable Tensioners. These Cable Tensioners keep constant pressure against your winch drum, which makes your wire rope wind smoother.

Complete Roller Guide and Tensioner kit for Jerr Dan carriers that have Ramsey 8,000 lb and 10,000 lb worm gear winches.

This is a cable tensioner kit for DP winches with a 13-3/4" wide drum.

Replacement Ring Gear for a Series 9 Winch by Warn Industries.

Ramsey Winch manual shifter assembly for RPH-12000 and RPH-15000 winches.

Sprocket, 28 tooth for Holmes 480,500,600, and 750

This Cable Tensioner from Diversified Products is 11" wide and will fit 8,000 lb. winches from Ramsey. The tensioner keeps constant pressure against your winch drum, making your wire rope wind smoother. It's also very easy to install and it keeps your cable from free spooling.

This is a sun gear, it is series 9.

This is a replacement right hand worm gear for the H-800 Winch by Ramsey Winch Company.

Ramsey Winch level winder for Model 400 Ramsey Winch. The level winder is used to help prevent winch cables from bird nesting on the winch drum.

This 9" Cable Tensioner is for use with 1/4" - 1/2" wire rope and drum sizes 8" - 9". Cable tensioners have a spring-loaded design that provides constant tension on the winch cable. This eliminates a slack cable condition and improves the winding of the cable on the drum. The rollers are high carbon steel with bronze bushings for long service life. The vertical rollers prevent the cable from rubbing the sides of the drum.

This Cable Tensioner is designed for rear mount winches with a 6"-7" wide drum. The tensioner guides wire rope evenly and tightly back into your winch drum.

This is a replacement S/P Disc Brake. This replacement brake fits a 9 Series Warn Winch.

A 13-3/4" half round rub bar on the tensioner plate for DP winches.

Prevent damage to the sidewalls of your front mount winch! This rugged bolt-on roller fairlead keeps wire rope wound evenly on the drum while preventing damage to the side walls of the winch.<BR<BR

This is a replacement Series 9 gear housing.

This is a Miller spade weldment dock stabilizer tube. It measures 5 x 4.

Zip's Custom Winch Free Wheel Lever Extensions. These extensions are designed specifically for the Century 2465 and Vulcan V-24 12 Ton Wreckers by Miller Industries. When mounted on a Medium Duty Chassis the winches are just too tall for most operators to quickly and safely reach the standard winch clutch release levers. Add these extensions and you will be able to easily reach the levers and engage or disengage the free wheel on both winches. Simple to install using the existing lever pins and handle hardware found standard on the winch free wheel levers. <BR<BR NOTE: Some Drilling Required

Positive Clutch for Holmes 750,600,500,480 and 440 Holmes Gear Boxes on Wreckers.

Roller chain for size 60 chain.

This is a replacement hydraulic winch motor that runs the hydraulic assembly on most light duty modular wreckers equipped with 8,000 lb. winches from Miller Industries. This hydraulic motor is 4 cubic inches and is commonly used with 8,000 lb. winches. To view which specific models this motor will fit, see Features below. To view the part schematics, see the Brochure tab.

This replacement seal kit is used on Parker winch motors commonly found on Century Carriers.