Mobile Office Vehicle Mounts

The RAM-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length 2.42", this is the lowest profile RAM? double socket arm size. The easy to adjust knob allows for near-infinite adjustability for your connected device.

The RAM-B-316-1-UN8B consists of the RAM POD I universal No-Drill vehicle base, 18" rigid aluminum rod, socket system and universal spring loaded X-Grip? cradle for 7"-8" tablets. The base of the mount connects to your seat rail without any drilling necessary. The 18" rigid aluminum rod can be bent to position your device to its optimum viewing location. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your 7"-8" tablet. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

The RAM-B-102-UN7U consists of a diamond base, double socket arm and universal spring loaded X-Grip? cradle for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you can move the X-Grip? mount to your optimum viewing position. The 2.43" x 1.31" diamond base has two holes 1.912" from center to center and matches the industry standard AMPS hole pattern. The included X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM X-Grip? is the cell phone cradle evolved. The X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

The RAM-B-138-UN7U consists of a 2.5" diameter round base with the universal AMPS hole pattern, double socket arm and universal spring loaded RAM? X-Grip? cradle for cell phones. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at the both ends of the socket arm; this with a twist of the arm knob, allows you to move the mount to your optimum viewing position. The included RAM? X-Grip? cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded RAM? X-Grip? cradle expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect complement to the modern sleek interior of today's vehicles, the RAM? X-Grip? is the cell phone cradle evolved. The RAM? X-Grip? includes a device tether recommended for outdoor applications. The cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Ram no-drill mount is designed specifically for 2012-2021 Ram 2500-5500 trucks. This mount requires no drilling into the vehicle and installs on the passenger side using the existing seat bolts.

The RAM-B-166U consists of a 3.3" diameter suction cup twist lock base, STANDARD length double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.

Now that you ve got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

The TekGrip Vent Mount can be easily moved from vent to vent. This phone holder has loaded Spring Clips, which can be lifted just by pushing the lever back. Travelers can take this mount on all their adventures. This car phone mount features a stabilizer bar that rests on the dash, providing you with low vibration. The phone holder expands up to 3.5", which is great for your smartphone, GPS or other portable devices.

Now that you ve got the right Tab for the job, you are going to need the right mounting system. Get the most out of your tablet with the Universal RAM Tab-Tite cradle. With 3 sets of interchangeable cup ends, ranging from different sizes and features, you can fit the cradle to your tablet for a near custom fit. This spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your mobile device.

The RAP-299-3-B-102U consists of a double socket arm, two diamond bases and RAM-A-CAN II cup holder base. The diamond bases measure 2.43" x 1.31" diamond base and contain two holes 1.912" from center to center, positioned at both ends of the diamond base. The hole pattern found on the diamond bases will connect to many RAM cradles, as well as third party cradles including mounts with the industry standard AMPS hole pattern. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. The RAM-A-CAN II cup holder base serves as a mounting point for the diamond base.

The Universal Vehicle Laptop Mount attaches to the passenger seat bolt using the quick release fitting. This mount is great for police, fire departments or anyone needing a laptop in their car. Viewers can adjust the angle of the computer with the Sure-Grip Pan-Head Deck, featuring the one hand locking control lever.

This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

The RAM-B-230U double ball adapter consists of two attached B size 1" rubber balls that allow the connection of two B size double socket arms. When measured from ball center to ball center, the length is 1.75".

The TekGrip Cup Holder Mount is a great way to mount your electronic devices. The expandable device holder arms open up to 3.5". This mount is easy to install. You just twist the dial until it s tight in the cup holder. Whether you are traveling or running errands, this mount stays out of sight and is easy to take your device in and out.

The RAM? No-Drill laptop mounting base for the Ford F-150 and Transit Connect van, features a heavy-duty steel mounting base custom designed to fit these vehicles perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.

This Locking Twist Lock Suction Cup Mount for Apple iPad attaches quickly and easily to your truck windshield, dashboard or any flat, smooth surface. Ball joints allow you to easily bend the mount in any direction to ensure the perfect viewing angle for your tablet. Tightening the locking knob holds your desired position. Dial combination lock in the cradle helps prevent theft. Patented design dampens shock and vibration to help extend the life of your iPad?. Features 3-1/4" dia. base and four mounting points with pre-drilled holes on the back. Design allows for easy access to all ports on your device.

The RAM-B-166-UN9U consists of a 3.3" diameter suction cup twist lock base, double socket arm, round base adapter and universal X-Grip? clamping cradle for 10" tablets. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The X-Grip? clamping cradle consists of a composite spring loaded cradle, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the cradle for quick release of your tablet. The X-Grip? clamping cradle expands and contracts for perfect fit of most 10" tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip?. The X-Grip? cradle is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

This No-Drill Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough-Tray is spring loaded to accommodate 10" to 16" wide laptops and (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics.

The Heavy-Duty Tablet Wall Drill-Base Mount with 8" Arm from ARKON Mounts is highly adjustable. Its 8” adjustable arm allows it to be moved into a variety of positions that give you better access. It can also be mounted to more than just vehicles. Finally, with its different support legs, you can fit tablets that are up to 18.4” large.

This kit includes the RAM-234-6 with the RAM POD I with a 1" diamter ball and socket. This universal vehicle mounting base quickly and easily installs into a variety of vehicles and other applications. The RAM POD I has a maximum extension of 18" but can be cut to desired length. The black steel foot can be attached to the inside seat rail bolt of the passenger or any existing bolt.

When you need a more permanent solution to mount your phone or tablet, ARKON Mounts made the Slim-Grip Ultra Heavy Duty Drill Base Mount. It attaches to flat surfaces and holds smartphones up to 7.25" tall and tablets of 7"-8" screen sizes with a spring-loaded holder. Plus it has a 360-degree arm swivel on both the top and bottom to give you the best angle you need. Finally, it has a 2-year limited warranty.

The Slim-Grip Tablet Holder with Windshield Suction Mount and Extension Arm allows your tablets to be easily seen and accessible as long as you have a windshield. Suction mounting right to the windshield, this mount can fit tablets that are between 7" and 18.4". Plus it has a sturdy, adjustable telescoping arm that can extend from 14.5" to 18.5".

Arkon Mount made the Slim-Grip Ultra Multi-Angle Adhesive Phone Car Mount for a quick-to-set-up and secure mount. With its ability to be connected with either adhesive or screws, this mount is quick and easy to set up while it will also last. Recommended for fleets and service vehicles, this mount accepts screens up to 8” tall. The best configuration is two long support legs on bottom and two short support legs on top.For larger devices, use the long setup; for shorter devices, use the short ones.

Tablet Organizer can be hung over either seat on front or back. Removes easily with quick-release buckle.