Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
Browse our line of premium products and replacement parts from Associated Equipment including battery chargers, portable jump packs, jumper cables and more.
The 6078 charger is an efficient parallel automotive battery charger. This unit delivers powerful performance by being able to charge up to ten 12 volt batteries in parallel, in less than 24 hours time. It is designed to operate on 220 volts AC 50 / 60 Hz. Features a patented multidiode rectifier with a deep reserve capacity, circuit breaker protection, isolated transformer, and the option to mount on a bench or a wall.
The Associated Model 6065 battery charger is designed to charge 1 to 10 12 volt automotive batteries in parallel, in parallel, in le ss than 24 hours. Designed with the fleet or high volume shop in mind. Great for salvage yards as well. The multiple charge rates al low batteries to be slow charged or fast charged at a rate not to exceed 30 amps output of the charger. Patented multi-diode rectifi er with deep reserve capacity. The volt meter allows you to adjust the charge rate to compensate for battery type, size and quantity of batteries on a charge. The output leads are terminated in ring terminals and designed to be permanently attached to the Associat ed 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended to be used as a car starting unit.
Associated Intellamatic 40/130 Amp 12 Volt charger features advanced circuitry for charging AGM, GEL, Flooded batteries as well as operate as an Analyzer and a constant power supply for flashing vehicles. The Micro-processor controlled 40 Amp Bench Charger and Power Supply has Reverse Polarity Protection for safety, utilizes three color LEDS to monitor charging status so you always know the batteries status. For standard automotive, deep-cycle, AGM and GEL Cell Batteries. Electrical Stability System (ESSTM) technology feature is a 45 Amp stable power supply for extended service procedures or re-flashes (Nominal 13.7V DC Output). This unit also features a program for deep discharge recovery of flooded batteries saving you money on discarded batteries. Patented diagnostics indicate weak or defective battery. Battery Selector Switch For Sealed / Flooded / ESS Flash. Dead Battery Override Control. Heavy Duty Construction means it will last a lifetime. MADE IN USA
The ESS6007B Associated Equipment Automotive Battery Charger Boost Intellamatic has Electrical Stability System (ESS?) for re-flashe s. With nominal 13.7 volt DC output technology, the ESS6007B is a stable power supply for extended service procedures. It also has a program for deep discharge recovery of flooded batteries and patented diagnostics that will indicate if a battery is weak or defect ive. Designed to charge all types of 12 volt batteries including; AGM, Gel Cell, Sealed, and Standard Flooded batteries.
The series charger workhorse Charges 2-60 cells from 0 to 6 amps. With state-of -the-art, anti-spark delay, voltage is shut off when current is interrupted, eliminating sparking. Added safety feature provides greater protection when charging 10 batteries where the voltage approaches 158 volts DC. Output current can be smoothly adjusted over full range of front panel control. Polarity protection for operator and equipment safety. Nine charging leads included.
Associated Equipment's Intellematic Model ESS6011 is a versatile 12/24V, 70/35A and 200A boost wheeled smart charger with a 70A power supply for standard automotive, deep-cycle, AGM and gel cell batteries. The Electrical Stability System technology turns the ESS6011 into a stable power supply for extended service procedures or re-flashes. The charger display includes an analog meter and three-stage LED charger indicator status.
This unit is a 12v 60/70 Amp / 270 Amp boost Smart Charger and power supply with 15 Amp memory saver port for standard automotive, deep-cycle, AGM and gel cell batteries. It includes a 12' memory savor cable and terminal covers. Program for deep discharge recovery of flooded batteries and patented diagnostics indicate weak or defective batteries.
This bus bar set has a 10 battery capcity for parrallel charging for use with 6066A smart charger or other parallel chargers.It is constructed with an insulated fiberglass backboard including 10 pairs of DC charging leads, 8-1/2 GA, 72" long with 300 Amp insulated safety clamps.
The Associated ESS6100 is a 100 Amp high power Smart charger Power Supply with inverter technology. It allows you to keep a 12 V lead, AGM, EFB, Gel Cell, or lithium batteries at a perfectly stabilized voltage during the diagnostic phases. It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customizable. OE Approved.
Ideal for battery distributors, high volume testing, and fleet use. High resolution carbon pile assembly, featuring unique curved carbon discs, ensures maximum contact, reduces hot spots, prevents edge burning and provides smoother operation and longer life. High RPM fan cools for continuous battery testing. Voltmeter leads are inside cables for protection. Model 6038 cart available for easy mobility.
Charges up to 36 automotive batteries in parallel, in less than 24 hours. Can be wall-mounted or on a stationary bench, 16 charge rates for precise charging. Each battery accepts charge required, depending on size, state of charge and temperature. Engineered so that an initial high charge rate tapers down to a safe finishing level. A isolated transformer and a heavy-duty diode rectifier with deep reserve capacity are standard features on this model. Model 6068 Battery Charger is designed to charge 12 volt batteries in parallel. The multiple charge rates allow batteries to be slow charged or fast charged at a rate not to exceed 110 amps output of the charger. The output leads are terminated in ring terminals and designed to be permanently attached to the Associated 6086 Parallel Battery Charging Rack, the Associated 6075 Parallel Bus Bar Kit, the Associated 6075CB Parallel Bus Bar Kit or the Associated 6075S Smart Parallel Bus Bar Kit. This unit is not intended as a car starting unit.
The 6044 Associated Battery & Electrical System Tester is an automated battery testing unit that uses no dirty, maintenance-prone carbon piles. Just enter the discharge current, press the ?start? button and the 6044 will perform the BCI battery test automatically, giving the most accurate means of testing a battery. Testing for the alternator and starter has also been automated, simplifying the use of this very versatile electrical tester. The 6044 also comes with external voltage leads which can be used to record the maximum and minimum voltage readings allowing for easy testing of electrical systems (including testing differential voltages). The unit also comes with a detachable inductive pickup (6043) which can be used to read current throughout the electrical system. The tester will also record the minimum and maximum current values turning many two person operations into a single, individual job.
Designed with highest quality and versatility in mind. Interprets data from the charging/starting system on easy-to-read LED display voltmeter and ammeter. Also shows +/- amps for easy diagnosis of current leakage problems. The 500 amp, carbon pile variable load c apability, provides accurate load testing for up to 1,000 CCA batteries. A great time-saver for testing electrical systems on 12, 12 /24 and 24 volt vehicles. Features include Large, easy to read, LED digital AMPS and VOLTS meters. The Volt meter displays voltages to ?99.9 volts DC on the EXT position and up to 35.0 volts DC on the INT position. The AMP meter displays DC currents up to 999 amps and reads both + and - amps for easy diagnosis of leakage current problems. The input impedance of the meters is 10 Meg ohms for ac curate testing of solid state circuits. The carbon pile is rated 500 amps on 12 volt batteries for load testing batteries up to 1000 CCA capacity. Curved carbon discs allow better low end resolution of current and longer life. Amps Zero Adjust allows for maximum a ccuracy in AMPS reading. "Load On" light indicates the carbon pile is actuated and serves as a reminder to turn the load off. Defect ive Diode indicator light lets you know when alternator output diodes or GM diode trios have failed. The electronic circuits are pro tected by a fuse against excessive voltage inputs and reverse voltages caused by connecting leads incorrectly that may damage the un it. The electronic circuit board has a protective coating to prevent damage and meter inaccuracy due to moisture and dirt. 6038C Two Wheeled Cart & 6043 AC/DC Current Sensing Inductive pickup are included with the 6042