Century

This is rubber fender well material from Miller Industries. This material is sold by the foot.

This Screw from Miller Industries is a socket style with a flat head. Screw measures 3/8" - 16 x 1.25"

This Miller Industries products is a full assembly of the left hand side of a tail light section on a car carrier. It is designed for any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This product bolts onto the mounting bracket which is attached to the subframe of the carrier. See features for additional information. This part can be used to replace Part Number 12-0905006.

Note: Special Handling Fees Apply

This Hydraulic Bed Extension Cylinder has a 3" bore, 2" rod, and it is 108" long. It is black in color and has a t-style end. This cylinder is designed to fit Challenger, Century, Champion, Holmes, and Vulcan Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns. Truck Freight Ship Direct Only

• 3" Bore
• 2" Rod
• 108" Length
• Uses Bed Attachment Pin 12-0702434
• Uses Snap Rings 12-0301642
• Uses Seal Kit 12-0308385
  
  Fits:
• Challenger Car Carriers
• Century 10 Series Steel & Aluminum Carriers
• Century 15 Series Steel & Aluminum Carriers
• Champion Steel & Aluminum Carriers
• Holmes 10 Series Steel & Aluminum Carriers
• Vulcan 10 Series Steel & Aluminum Carriers
• Vulcan 10 Series Extreme Angle Steel Carriers

This Sheave from Miller Industries has a diameter of 10". The middle hole has a diameter of 1.5" and the width is also 1.5"

This Tie-Down Assembly from Miller Industries comes with a ratchet, d-ring, and flat hook with a safety latch. It is used on the Wheel Lift Assembly of Century 20 Series Car Carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.

This 12V replacement Coil from Miller Industries is used on Century Express Wreckers.

Wear pad kit for a 19' Century 10 series aluminum carrier. The Kit includes parts for 1 side only. This is a full length slide-in type pad that iserts into the groove in the aluminum sub-frame.

This Adjustable Clevis from Miller Industries is used on the Control Assembly of several Century and Challenger Wreckers. The clevis itself is 2.5" tall and .75" wide. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

This is a cylinder seal kit for Tilt Cylinders 12-0301823 and 12-0301824. This seal kit will fit Century Formula I - Duplex Tilt 411, 412, Super Six, and 500 Series, Formula 6000 - 600 Series, and Metro I Duplex Tilt. To view part schematics click the Brochure tab.

This part can be used to replace Part Number 12-0310866.

This Miller Industries LED side light is a dual-purpose light that will operate as a marker light and when the docking light function is activated, the light will operate as an LED flood light. Included with this is the flasher control power unit which allows it to function as a marker light and flasher light.

Miller Industries wear pad for the wrecker boom.

Used on V30 and 3212

This is a Miller Industries Control Box hood for the driver side of any Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool system and is a Black steel finish.

This is a replacement gas strut made by Miller Industries.

Note: Special Handling Fees Apply

This replacement wear pad kit fits Miller 21' LCG Car Carriers.

• Fits 21' LCG Car Carrier
• New Style
  
  

  Bearing Pad Kit Breakdown

• (2) Subframe Wear Pad - 5/16" x 36"
• (2) Subframe Nylatron Pad - 5/16" x 65"
• (2) Subframe Wear Pad - 5/16" x 96"
• (2) LCG20 Bearing Pad Steel Sill
• (42) Screws - 5/16-10 x 1 1/4"

This is a Vertical Boom Guide pad for Century 300 Express Series, Century Modular 211, Vulcan Modular 804, Vulcan Modular 806, Vulcan Modular 807, Vulcan 805, Vulcan 810 Intruder, and Vulcan 812 Intruder by Miller Industries. See Brochures for part schematics and Features to see related parts and to see what models this will fit.

This Galvanized Tail Light Housing is for the left hand side of Century or Vulcan LCG Generation I or II Car Carriers. This shell houses all of the left hand side tail light components and the face plate. It bolts onto the mounting bracket,

This Shim Washer from Miller Industries is used on the assembly of Century 312 Wreckers, and Vulcan 810 and V30 Wreckers. This washer has an inside diameter of 1-1/2", an outside diameter of 2-1/8", and a thickness of 1/8". Please see the features below for a list of wreckers and see the brochure tab for breakdowns.

Note: Special Handling Fees Apply

This is a crossbar for a Century Formula I Wheel Lift Assembly. It will fit Formula I Wheel Lifts that were built in 1996 or newer. It uses a WL-300K3 pivot pin kit.

• 3" x 3" square tube
• Used on Formula I wheel lifts after March 1996
• Accepts 12-0902456 & 12-0902457 standard l-arm outer crosst ubes
• Also accepts 12-0904152 & 12-0904153 pivot l-arm outer crosstubes
• Uses WL-300DK1 detent ball kit
• Length: 53"
• Width: 4"
• H eight: 9.25"

This is a Miller Industries Control Box hood for the Passenger side of any Century/Vulcan Car Carrier 2005 & newer (Excluding LCG). It houses a 5-spool system and is a black, steel finish.

This is a replacement boom lift cylinder lower pin for the Century 1130/1140, 7035, 9055, and Challenger CH-35 and CH-45 heavy duty wreckers by Miller Industries. This pin connects the boom lift cylinder to the subframe of the wrecker. To view the models this pin fits, see Features below. To view the part schematics, see the Brochure tab.

This Latch Kit from Miller Industries has a heavy duty spring loaded latch. It is used on many 1/2" safety chains that come with slip hooks.