Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
This is a 66" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit
This is Jack Up and Down Control Knob from Miller Industries. It is used on Control Assemblies of many Miller Wreckers that use a Jack control. These wreckers include Century, Challenger, Holmes and Vulcan Wreckers. Please see the features below for a list of wreckers and see the brochure tab for breakdowns.
This is a 2.5" Wheel Lift Fold Cylinder on Century Modular Midnight Express, Holmes 440SL and Vulcan 810 Intruder light duty wreckers. To view specific wrecker models please see Features below. To view part schematics click on the Brochure tab. This part can be used to replace Part Number, 810700000.
This is a replacement wheel lift upper arm pin weldment on Light Duty Century and Holmes Wreckers by Miller Industries. This pin attaches the wheel lift upper arm weldment to the frame weldment. This pin fits the Century Formula 6500, 600 Series and Modular 400 & 600 Series. It will also fit the Holmes HP 552/DFT 650 wrecker. To view the part schematics please click the Brochures tab.
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit 12-0940277.
This is the Wheel Lift Extend Cylinder Pin for the wheel lift of many light duty wreckers by Miller Industries. This extend cylinder pin fits the following wreckers: Century Modular 300 Express Series, Century Modular Midnight Express, Century Modular 211, Holmes 440SL, Vulcan Modular 804, 806, and 807, and the Vulcan 810 Power Tilt. This pin measures 5.88" long with a diameter of 7/8". To view specific models and year range for each model see Features below.
This is a Miller Industries tail light face plate for the left hand side of any car carrier excluding the LCG Series. It is available in either black painted steel or stainless steel. This polished stainless steel will not rust and it uses a new style grommet type of back-up alarm. The light configuration is horizontal but vertical is also available (see part # 12-0721339).
This is the seal kit for the wheel lift tilt cylinder on the Century Formula 6500 - 600 Series light duty wrecker by Miller Industries. To view part schematic click on the Brochure tab.
This Pivot Pin Weldment from Miller Industries is used in the wheel lift assembly of Century and Vulcan Wreckers. It is also used in the boom assembly of some Century and Challenger Wreckers. Please see the brochure tab for a list of breakdowns.
This Top Half Pivot Pin from Miller Industries is used in the SDU, underlift, and tower assembly of many Miller Wreckers. These Wreckers include Century, Challenger and Holmes Wreckers. The Pivot Pin is secured onto the crossbeam weldment with a screw, washer, and thrust washer. Please see the brochure tab for a list of breakdowns.
This is a replacement control cable for Century and Challenger Heavy Duty Wreckers. This control cable is 96" long. Please see Features for what models this control cable will fit.
This is a newer style Miller Industries Control Handle Knob (older Style # 12-0301428). It is grey in color and is labeled "Up/Down" for wheel lift extend operations. See Features for related wreckers and Brochures for reference charts.
This Stop Pad from Miller Industries is used in the boom assembly of Century, and Challenger Wreckers. It is also used in the wheel lift assembly of Vulcan 810 Intruder Wreckers. The pad measures 3-3/4" in diameter, 1" tall, and 1/8" thick. Please see the brochure tab for a list of breakdowns.
Also known as a wheel grid, slide bar, or receiver, this 3.5" Outer Cross Tube Assembly from Miller Industries is a complete right hand assembly. This cross tube is used on the outer cross tube and 3-way pivot tire restraint assembly of Century and Century LCG Carriers, and Vulcan LCG Wreckers. It fits 3.5" x 3.5" square tubes and it accepts Right Hand Tire Restraint L-Arm, 12-0904156. Also, shop for the left hand version of this Outer Crosstube, 12-0909499L, by clicking here. Please see the brochure tab for a list of assemblies and breakdowns.
This Miller Industries product is a full assembly of the right hand side of a tail light section on a car carrier. It is designed fo r any Century 10, 12, 15, 20, or 30 Series. It includes all the necessary parts to replace the entire tail light section. This produ ct bolts onto the mounting bracket (12-0710784) which is attached to the subframe of the carrier. The replacement faceplate part number is 12-07000562. See features for additional inform ation. This part can be used to replace Part Number 12-0905007.
This is the extend cylinder for the wheel lift on Miller Industries Light Duty Wreckers. This will fit the Century EB4 Express, Century Formula I 411 & 412, Century Formula I Super Six & 500 Series, Century Formula II, Century Formula 6000 - 600 Series, Century Metro I, Century Modular 211, Century Modular 400 & 600, Century 211 & 212. It will also fit the Challenger 4700 Series, Champion Model 101, Holmes 440 Series, Vulcan Modular 804, and Vulcan Modular 806. To view specific years of wrecker models see Features below. To view part schematics click on the Brochures tab.
Dimensions: 39"L x 5"W x 5"H
Length Eye to Eye: 37.5" L Fits:
Century EB4 Express (03/1999 to Current)
Century Formula I, Duplex Tilt, 411 & 412 Wreckers
Century Formula I, Duplex Tilt, Super Six & 500 Series
Century Formula II
Century Formula 6000, 600 Series
Century Metro I, Duplex Tilt (D.T.) Wheel Lift System
This 1" O-Ring from Miller Industries is used on the crossbeam pivot pin of the inner crosstube weldment on the Wheel Lift and Tire Restraint Assembly of several Miller Car Carriers. These include Century, Challenger, Champion, Holmes, and Vulcan carriers. See the features below for a full list of carriers and see the brochure tab for breakdowns.