In The Ditch

In The Ditch designed their XD "Extreme Duty" Trash Can Mounts to hold up to 60 lbs. of weight. Not only will these mounts hold up to 60 lbs. of weight, but they look good and will last for years. You can choose from either a 6 gallon can XD mount or 4 gallon can XD mount. These mounts are made from 1/8" thick aluminum and they have a bungee cord already installed. Both of these mounts can easily be mounted to any vertical surface such as tool boxes, truck frames, or garage walls. There is no trash can included with these mounts but we do offer those too. Shop for your new

These Pro Series Dolly Bunks from In The Ditch fit all sizes and all brands of dollies with either 4.80 x 8 or 5.70 x 8 tires. Dolly bunks are made from 3/16" thick aluminum and will last for years. This set includes two complete bunks and two lockable retaining chains.

This Tension Spring is a direct replacement for the ITD-1196 Universal Spring Tube. This part can be used to replace Part Number 12-0308733.

Replacement tire for In The Ditch's Speed Tow Dolly. Make sure to use steel valve stem and inflate tire to suggested PSI on sidewall to achieve maximum load rating capacity.

These completely redesigned Lumber Baskets from In The Ditch are available in three different lengths: 48", 60, and 70". All of these baskets are 11" tall and 8" deep. Mounting is a snap; just bolt the basket to the back of your tool box with six 5/16" bolts using the pre-drilled holes. In minutes you will have a great place to store extra lumber, tire chains or anything else that you can think of. These Lumber Baskets are made from aluminum and they have drain holes in the bottom that will help them last for decades.

This Universal Mount system is a perfect choice for those wanting a low profile all-in-one mount that holds a Speed Dolly frame, axle and break over bar. The Universal Mount uses the same bolt pattern that is pre-drilled in Jerr-Dan MPL, MPL40 and Element wrecker bodies but can be used on any brand wrecker body. The Kit comes complete with everything needed to hold 2 Dolly frames, 1 break over bar and 2 axles and comes in our Tuff Coat Black Finish. Pick from the Standard or the XD Mounts. The Standard Mount is made for 2 Speed Dollies with 4.80 Tires. The XD Mount is made for 2 XD Dollies with 5.70 Tires. Sold as set.

This In The Ditch 5 Gallon Gas Can Mount is made from aluminum and holds a 5 gallon plastic fuel can. The mount is made from aluminum and it is easy to install. Gas can and bungees are not included, but we also offer those. Shop for

This is a replacement bolt on spindle kit for the right hand side of the X-Series Standard Duty Dolly by In The Ditch.

This Broom and Shovel Rack is the perfect way to store your brooms and shovels. Mount this rack to the deck, wall, or roof for easy access. The angle of the mount can be adjusted to the angle that is most convenient for you. Come pre-drilled for bungee cords to make securing your brooms and shovels easy. The rack also comes with a bolt-on bracket that keeps your broom head or shovel head flat.

The Speed Spacer from In The Ditch solves that age old problem of how to dolly a vehicle with a flat tire. They have designed the Speed Spacer as a tool to take up space that a tire full of air would have occupied. made from high strength aluminum the Speed Spacer is not only strong, it is light and easy to install. It is sold as an individual item so you need to order (2) in order to make a set for one side of your dolly.

This Angled Cone Mount from In The Ditch is a perfect way to mount your traffic cones on a carrier or flatbed truck. The angle of the mount allows you to quickly access cones from under a fixed deck. The angled cone mount will hold up to six 18" traffic cones. This mount is part painted steel and part aluminum that will hold up to years of abuse.

This Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This Revolution Boom Head from In The Ditch is a direct replacement for the Holmes 440, SP8000, SP12000 Side Puller, and the Century Midnight Express. The head accepts 3/8" and 7/16" wire rope, and it has a 12,000 lb. rating. The guide cover comes off easily with one hand, which allows the wire rope to be installed with ease.

This Rubber Plug for ITD-7123 Grease Cap is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This is a replacement bolt on spindle kit for the left hand side of the X-Series Standard Duty Dolly by In The Ditch.

Dust cap for 4 bolt hub on Speed Dolly.

This cord holder is a great way to not only securely store your power cords and air hoses but also keep them organized and easy to access. These are also perfect for a variety of hammer types and sizes to keep them at the ready above your workbench. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Air Hose Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select proper mounting hardware for pegboard, wood, metal or even drywall. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This Double Axle Rack from In The Ditch is perfect for those wanting to store their dolly axles and break over bear on one side of the truck. A great feature of the double axle rack is that it can be mounted on an incline; which is a big advantage when you have a wrecker with a rear sloping deck. The double axle rack comes with different mounting brackets, whether you have a flat mounting surface or a slopped deck you will have the right mounting bracket for you truck. With the AUTO-LOX system your axles easily fit in the mount and lock into place. The mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a

1" Grease Seal, used for Speed Dolly, 4 bolt hub.

This Slide In Jack Bracket from In The Ditch is made from aluminum and it is 13" wide and 25" long, so most floor jacks will slide in easily. This bracket is really going to save your back. Stop wrestling with your floor jack and install this bracket today. Installation is easy; just remove the back panel of the tool box and bolt the Slide In Jack Bracket in using the included hardware kit.

Maximize the recovery capabilities of your car carrier rollback, light duty wrecker, or medium duty tow truck with the In the Ditch SP9000 Sidepuller. This is a SP9000 Sidepuller that is designed for those who want a more customized installation. Zip's provides you with the sidepuller, from In the Ditch, with everything except the valve body and hydraulic hoses. This gives you the option of providing your own custom hydraulic controls. Typically this application is for those who order their carrier or wrecker with factory installed sidepuller controls. When you order this SP9000 sidepuller it will come with the following: Center Recovery Boom Head, Outer Removable Recovery Boom Head, Light Bar Mounting Base, 9,000 lb Winch with Tensioner Plate, Winch Free Spool with Easy Reach Handle, 3/8" x 100' Wire Rope, Adjustable SP Mounting Base, Installation Hardware, Painted Tuff Coat Gloss Black Finish, Polished Stainless Steel Rear Panel, Decal Package, Operation Manual (also available online), and it will come on a shipping stand. To view a specifications sheet and operations manual, click on the brochure tab. Click on the video tab to see more about this amazing product.

This Axle Slide Tunnel Box Mount from In The Ditch has become a best seller. This mount is easy to install and easy to use; just bolt the mount to the top of your tunnel box. Axles have a tab factory installed that fits the slot in the mount. All you do is start the axle into the mount, push across, and your axle automatically locks into place. This mount will hold two axles and one break over bar. Shop for your

This Universal Storage Bracket from In The Ditch is perfect for holding two small 2.5 gallon jugs, a 5 gallon jug, a small tool box or just about anything that will fit in its 11-1/4" x 16-1/2" mounting surface. Multiple slots have also been included so straps or bungee cords can be used to secure your items to the mount. This mount will bolt directly to a tool box.

This Spindle Nut Retainer is for use with the Speed Lube Spindle Speed Dollies from In The Ditch.

This is a replacement bolt on spindle kit for the right hand side of the X-Series Standard Duty Dolly by In The Ditch.