Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
In The Ditch offers a variety of products to make the lives of towing operators easier and safer. Browse our line of premium products and replacement parts from In The Ditch including towing dollies, jacks, racks, mounts, gas cans and more.
This 3-In-1 Hook Rack from In The Ditch has become very popular because with
its modular design, the uses are limitless. Each hook has an inside depth of
2-3/4", making it just the right size for hard hats, extension cords, tape
rolls, wire rolls, and so much more. Each 3-In-1 rack comes with 4 arms that
can be installed in any of the 5 slots so you can choose where to put it. If
you need a larger hook be sure to shop for the XL Modular Hook Rack, ITD-1249.
With all of the various modular composite body sides that are coming out, finding the best solution for mounting your tow dollies is becoming increasingly difficult. This product by In the Ditch will solve that problem. This modular speed mount bolts directly to the steel wrecker body, suspending the dolly cradle over the composite side. This mount features 22" of tilt, allowing you to accommodate the angle of many composite body styles. This mount comes in a Tuff Coat Black finish, and is equipped with the vice action lock, eliminating the chance of theft. This mount is sold individually and is only compatible with the In the Ditch Speed Dollies or SLS Speed Dollies.
This Single Axle Rack was designed for those wanting to mount a dolly axle on each side of the truck. Each rack will hold a telescoping aluminum axle and break over bar. They are sold as a set, which contains two single axle racks and one thumb screw to hold down the break over bar. This In the Ditch's AUTO-LOX system, the axle easily fits in the mount and locks into place with just a twist. Mounts are pre-drilled, lockable and come in a tuff coat black finish. We also offer a
This Integrated Speed Mount from In The Ditch is similar to the Speed Mount except it has an Integrated Mount that can hold a break over-bar and aluminum axle. Locking the axle, break over bar and Speed Dolly is all done with the built in Vice Action Lock. There is a reason this is a top seller, its ease of use keeping the dolly frame, axle and break over bar in one spot. Made from steel with a Tuff Coat Finish you will get years of dependable service. We also offer regular
This quick aluminum Cone Holder from In The Ditch ships flat and erects easy. Mounting is a snap, the mount simply bolts to the side of any tool box or flat vertical surface. This mount will hold five 18 cones and is made from 1/8 aluminum. Shop for your
Keep your tow dollies secure on the deck of your wrecker with this Vise Action
Lock from In The Ditch. The replacement lock assembly fits multiple ITD mounts
and includes the cylinder, key, catch and mounting hardware.
This revolutionary Scotch Block from In The Ditch is made from lightweight, high strength alloy steel. No more having the chain atta
ched to the scotch block. This was designed with a reinforced chain pocket so you can use your own chain. Scotch block measures 16"
wide x 14" long and comes with a tuff coat black finish. Shop our other
This Frame Fork Storage Rack, from In The Ditch, is 30" long and it will hold four regular forks and two spring lift adapters. This rack will fit in most side box compartments. In a matter of minutes you can bolt the mount in place and keep all your forks in one place. It was built from aluminum so it will hold up for years. If 30" is a little too long, don?t worry we also offer a
These In The Ditch Drop Down Dolly Boxes will save your back from heavy lifting off the deck. The drop down dolly box is weather resistant and protects your dollies from snow, ice and road debris. They are easy to use, just pull the aluminum tray out and tilt the tray down. The Standard Single Box was specifically designed to hold the Speed Dolly with 4.80 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. The XD Single Box was specifically designed to hold the XD Speed Dolly with 5.70 tires perfectly keeping the hubs and valve stems facing up for easy servicing while in the box. New composite bearings for the sliding/tilting tray were designed to last for years. We also offer a
The Tilt-N-Slide under-body slide out Dolly storage mount from In The Ditch was designed to be low, fast and easy to use. One of the things drivers like about this Dolly mount is that the Dolly can be slid out and serviced without taking it out of the mount. Another feature is that it puts the Dolly in the perfect ergonomic position for the driver to lift up. This mount also has a pre-installed Vice Action Lock installed. The Tilt-N-Slide is made from steel and comes with a black finish.
These Tire Stand Mounts from In The Ditch are a great way to store your tire stands within easy reach. These mounts have a Cam-Lock locking feature that will hold your tire stand securely in the mount. The Cam-Lock location can be on the left or right side of the mount, specify which you prefer in the drop down option. There is also a provision on the mount so you can use a Pad Lock to protect your Tire Stand from theft.
This 28" Vertical Cone Holder from In The Ditch bolts to the side of any toolbox or vertical surface. It will hold up to six 28" cones. This handy mount is made from 1/8" aluminum, comes with skin packaging and ships flat.
This Tow Bar Adapter Mount from In The Ditch is designed to hold the Chevron Auto Grip Tow Bar Adapter. The mount is made from aluminum, has pre-drilled mounting holes and can be locked to help prevent theft.
This Rack from In The Ditch holds aerosol cans, and has spots
for your air tools. These slots can hold things like pliers, and all standard
1/4" air fittings. Like most In The Ditch products this rack comes with
pre-drilled holes for easy mounting. This rack is perfect for organizing your
truck or shop so be sure to get yours today!
Note: Special Handling Fees Apply for Specific Items
These are replacement stainless steel panels for In The Ditch Quarter Fender
and Storage Fenders. They are available in 4 sizes: 16.75", 24.25", 34.75",
and 42.75". Choose your size and which side you want from the drop down
menus.
Choose from 4 different sizes: 16.75", 24.25", 34.75", and 42.75"
Choose which side you want: drivers side or passenger side
This Dolly Speed Mount from In The Ditch is a great choice for those who want their dollies on the deck. It was designed with large contact pads for the dolly wheels to rest on, so no more driving down the road watching your dollies shake in the mount. Removing the dollies is easy, just lean it towards you and they come right out of the mount. This speed mount also has a built in Vice Action Lock to keep your Dolly safe and sound. Installation is fast and easy because of the pre-drilled mounting holes.
This is a replacement Center Recovery Boom Head from In the Ditch. This is a
complete boom head that includes a 3/4" Snap Ring, Center Boom Head Sheave Pin,
6" Sheave, Center Boom Head Wire Rope Guide, Center Boom Head Main Body and a
3/4" Washer.