In The Ditch

Keep your paper towels and cleaning supplies at the ready in your garage and trailer with our Paper Towel Holder with Shelf. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. This shop towel rack includes a hold-down flap that keeps your towels from unspooling in the breeze and perfectly positioned to pull the next sheet while the integrated shelf keeps your cleaning supplies and shop gear organized. Our paper towel rack with shelf works great on any flat surface including drywall, wood, metal, and pegboard using our optional hardware.

The ITD Wire Rope Tie-Back Spring Tube is perfect for securing the winch-line from your central boom, and prevents the line from dangling or bouncing around. Can be used on both the SP9000 and the SP12000.

This is a replacement compression latch with lock for drop down dolly boxes by In The Ditch. This latch comes with a chrome finish.

This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. The hook is 6-1/2" long and has an individual load rating of 30 lbs.

This is a replacement dolly side frame for the SLX Standard Duty X-Series Dolly. This side frame does not include hubs or tires.

Foam handle for Speed Dolly break over bar.

The Traveling Speed Chock from In The Ditch helps prevent vehicles from rolling off the deck of a car carrier during loading and unloading. Chock travels up the deck with the vehicle and will help prevent the vehicle from rolling off the deck should you have a catastrophic failure of the winch of wire rope. People who have used it are calling in a Life Saver! The chock can be set up to work from the passenger or driver side. It will easily adjust to fit most passenger vehicles. The rubber chock is sipped for better holding ability. Shop our large selection of

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 12", and 18" heights and depths. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.

Our Aluminum Wall Hooks are a versatile and easy option to organize your truck, shop, garage, or trailer. We offer hooks in 3", 5", and 7" lengths. The heavy-duty aluminum alloy construction gives these hooks a structural rating of 100lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surfaces. Load rating may be limited by the mounting surface.

In The Ditch's Speed Chocks are one of the best ways to quickly chock or anchor light and medium-duty tow trucks. The Speed Chocks feature stainless steel grousers that really bite in and offer exceptional holding power. The Speed Chocks unique design separates them from other chocks on the market. Anchoring a tow truck can be frustrating, the Speed Chock is the solution, not only do they work as a chock they can be chained to the wrecker for exception holding power. Don't get caught up in saying, "a chock is a chock" until you try these bad boys. You will be blown away by their ability to help anchor a truck. This kit also features steel mounting brackets for easy storage of the Speed Chocks. Mounts are pre-drilled for easy installation and can be mounted in a vertical position, such as on a tool box wall or horizontally on the deck. Kit includes 2 Speed Chocks and 1 mounting kit.

This is a replacement rear accent panel for the SP9000 Sidepuller. The panel is made out of polished stainless steel, with a mirrored finish.

This is a replacement inner leg assembly for the SP9,000 SidePuller.

This is a In The Ditch stainless steel replacement toolbox door panel.

In The Ditch's Speed Chocks are one of the best ways to quickly chock or anchor light and medium-duty tow trucks. The Speed Chocks feature stainless steel grousers that really bite in and offer exceptional holding power. The Speed Chocks' unique design separates them from other chocks on the market. Anchoring a tow truck can be frustrating, and the Speed Chock is the solution! Not only do they work as a chock, but they can also be chained to the wrecker for exceptional holding power. Don't get caught up in saying, "a chock is a chock" until you try these bad boys. You will be blown away by their ability to help anchor a truck. The ITD1085 Speed Chock includes one complete chock with grouser installed.

This 5.70 x 8 Load Range D Carlisle USA Trail Tire from In The Ditch is the finest tire made. It has a 1,070 lb. load rating and it is made in the USA!

This Rack from In The Ditch comes with 6 spots for aerosol cans, and 7 spots for your air tools. These slots can hold things like pliers, and all standard 1/4" air fittings. Like most In The Ditch products this rack comes with pre-drilled holes for easy mounting. This rack is perfect for organizing your truck or shop so be sure to get yours today!

This 1" Spindle Washer from In The Ditch is for the hub assembly on a Speed Dolly.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This 1" Spindle Nut from In The Ditch is for the hub assembly on a Speed Dolly. The spindle nut is also known as a castle nut.

This is a replacement sheave pin that holds the sheave in place for the Main Body Boom Head.

This easy to install shelf from In The Ditch will help you quickly organize your truck, garage or trailer. Shelf can be installed using screws in the pre-drilled holes or by using 3-M Doubled sided tape, the choice is yours. Shelf is 3? deep, 3? tall and 6? long. We also offer a

This replacement Right Hand Speed Lube XD Dolly Spindle comes with the spindle, side plate, pivot axle, and installation guide.

This replacement Left Hand Speed Lube XD Dolly Spindle comes with the spindle, side plate, pivot axle, and installation guide.

These Scotch Block Mounts from In The Ditch bolt to the bottom side of a wrecker tool box for convenient storage of Scotch Blocks. These mounts come with lynch pins, and they can also be locked with your own pad lock.