In The Ditch

This Deck Mounted 2 Gallon Container holder is designed to work with most 2 Gallon containers. This Mount is made from Aluminum, includes a 21 Bungee Cord and can be mounted to any flat surface. (Note) If You intend only transporting Fuels, please check your local laws regard transporting Flammable Liquids

Removable wire rope guide cover for revolution boom head. Replacement item for SP8000 sidepuller.

This is a replacement crossbar locking pin for In The Ditch-1253 power hitch.

This is a replacement dolly side frame for the SLX Extreme Duty X-Series Dolly. This side frame does not include hubs or tires.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This 5th Wheel Head Pin is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

This 16" Storage Tray from In The Ditch is perfect for storing just about anything. It comes with 6 slots and 4 moveable snap in dividers. It is great for separating and storing screws, nuts, and fittings.

This is a replacement foot pivot pin for the SP9,000 SidePuller. The pin is used to lock the stabilizer's foot in place when leveled.

This Gasket from In The Ditch is a replacement part for the ITD-7106 Paddle Latch.

These aluminum wall hooks from In the Ditch are a versatile and easy option to organize your truck, shop, garage, or trailer. These hooks are offered in 3", 5" and 7" lengths. The heavy duty aluminum alloy construction gives these hooks a structural rating of 100 lbs. Mounting options are nearly endless including pegboard, drywall, and any other flat surface. All of the necessary hardware is included to make installation quick and easy.

This is a replacement stabilizer foot for the stabilizer legs on the SP9,000 SidePuller, from In The Ditch.

This 6" Shelf from In The Ditch is great for your home, shop, or garage. It is perfect for smaller items because it is 6" deep and 18" wide. The shelf installs with the gussets up, which creates a shelf with a lip, or turn it over with the gussets down to create a smooth top shelf. The pre-drilled holes are 16" apart so they can be screwed to a stud with ease.

This 5th Wheel Head is a replacement part for ITD-1253, a Fifth Wheel Power Hitch from In The Ditch.

The rear trim panel is standard for the SP9000 SidePuller. Made out of stainless steel, the panel is sure to last. The steel has been polished and has a mirror finish, giving it a professional look. With its bolt on design, it makes the panel very easy to install and replace.

This is a replacement dolly side frame for the XL Extreme Duty X-Series Dolly. This side frame does not includes hubs or tires.

Keep your angle grinder neatly stored and ready to use with In The Ditch's Mount for 4-1/2", 5", and 7" Angle Grinders. If you're tired of your angle grinders rolling around in your toolbox then these racks are what you ve been looking for. Mount them up on the wall of your truck, ready to use and professionally displayed. Designed to securely hold a wide variety of angle grinders by the guard so you can leave on wheel and disc attachments for quick retrieval and use. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Angle Grinder Mount looking sharp even after years of faithful service. Mounting to any surface in your truck is simple, just select your mounting surface and see the optional hardware to match, no guesswork required. We even offer the right driver for flawless installation. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted and that actually worked.

This is a polished stainless steel dress-up kit for the SP12000 sidepuller by In the Ditch. This dress-up kit will set your truck off and give it the custom look you want. These accent panels are laser cut from polished stainless steel and have 3-M double sided tape already installed. Each kit includes two boom accent panels, two leg accent panels with pinch point decals installed on them.

This is a replacement lower cylinder pin, to be used for repairing or replacing the lower cylinder pin for the In The Ditch SP9,000 Sidepuller.

These pylon mounts by In the Ditch are a great option for people who want to install SP Series light pylons to SP Sidepullers. This mount will fit all models of the SP Series sidepullers. This item includes 2 mounts and requires the customer to weld on.

Update the Cam Lock on your In The Ditch Speed Tow dolly with this weld-on replacement part. The cam features positive lock positioning and simple lever operation to engage/disengage the cam to rotate dolly wheels from their storage position to the ground.

This headset holder is a great way to not only securely store your ear muffs and welding helmets but also keep them organized and easy to access. These are also perfect to hang a variety of small cords, hats, and coats to keep them at the ready in your shop. Aluminum alloy construction and our Endurance Black Powder Coat Finish keeps your Ear Muff Mount looking sharp even after years of faithful service. Mounting to any surface in your garage or trailer is simple, just select the appropriate hardware for your mounting surface.

In The Ditch Drill and Power Tool Holders are made from aluminum and powder coated in a black finish to provide year after year of faithful service and a clean, sharp look. Mounting these power tool holders on any flat surface in your garage or trailer is easy, just select the appropriate hardware to match your mounting surface. You can choose dry wall screws, pegboard screws, metal screws, or wood screws to mount your cordless tool holders. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.

This Bearing from In The Ditch has been designed with a steel out wear band. It's recommended that when the time comes for you to replace your bearings on your Drop Down XD Dolly Box from In The Ditch, that you do it with these. They only fit Dolly Boxes built after 2009.

Get your garage and trailer organized today with our In The Ditch Garage Wall Shelves. They come 3" width and are available in 6", 9", and 12" heights. Sturdy steel construction and Endurance Black Powder Coat Finish will give you years of reliable service with a clean, sharp look. These wall mount shelves are stout enough to hold up to your storage needs and keep you organized. Our metal wall shelves work great on any flat surface including metal, drywall, wood, and peg board using our optional hardware tailor made for your application.