Free shipping is only valid on total purchases of $199 or more and ground shipments within the contiguous 48 states for products weighing less than 150 lbs. Special handling fees may be required for some products.Shipping fees will be added for all orders under $199 or that include oversized items or any item of 150 lbs or more. Please contact customer service if you have any questions.
In The Ditch offers a variety of products to make the lives of towing operators easier and safer. Browse our line of premium products and replacement parts from In The Ditch including towing dollies, jacks, racks, mounts, gas cans and more.
Get your truck organized with this Frame Fork Storage Rack. This frame fork storage rack will easily mount in most tool boxes and can hold six regular forks. Since the mount is 23" long, it fits most side box compartments. This rack is made from 1/8" thick aluminum that will last forever and doesn't need to be painted. If 23" isn't long enough check out our
In The Ditch's Locking Short Simple Mount is a great low cost way to hold your Speed Dollies. This mount is the same as the Short Simple Mounts but now they feature the new speed lock on them. This mount is made from steel and comes in a tuff coat black finish. Sold as Each.
This pylon is designed to fit all SP series sidepullers. It is made from steel and comes standard with stainless steel mounting hardware. It features laser cut holes for mounting work lights and is painted in a tuff coat gloss black finish. This pylon will need to have the In the Ditch light pylon mounting base installed on the sidepuller in order to mount this pylon.
In The Ditch Peg Board Mounted Aerosol Can Holders come in 3 different sizes: (1) Can (3) Can and (6) Can holders. Our spray can holders are a great way to not only store your aerosol cans, they work great to keep your aerosols organized and easy to access. Our peg board spray can storage racks are made from steel and are powder coated in a black finish. The hole spacing for mounting our aerosol storage racks are made so you can install them in peg board using our Quick Mount Peg Board Screw . Installing your spray can rack is simple, just line up the mounting holes with the peg board holes and install our peg board screws. It s that simple! No drilling, no measuring, no leveling and best of all you can reuse the peg board screw over and over with no damage to the peg board hole. If you want to install the aerosol holder on any flat surface, just the type of hardware for each mounting surface. You can mount with pegboard mounting screws, dry wall screws, metal screws or mount to wood with a wood screw, it s your choice. We designed these for use in our manufacturing facility and put a lot of thought into getting everything just right. Like most of the products we make, we designed them because no one seemed to build what we wanted that actually worked.
This machined aluminum wheel is an exclusive design from In The Ditch. The rim is a replacement part for the ITD Speed Dolly and has met all of the DOT requirements. Rim comes with a high-pressure valve stem installed.
These Shelf Kits from In the Ditch are available in three different sizes: 48" 60" and 70". Full length shelves will essentially double the useable space inside of your toolbox. Made from aluminum, these shelves are 14" deep. The shelves actually come as two half shelves with a vertical support, giving you the option to use them as a half shelf or full shelf. All necessary mounting hardware is included and there is no drilled required because of they come pre drilled.
18" Lanyard Cable is a replacement part for In The Ditch Pro Series Toolboxes. When installed on each end of a toolbox, the door in its open position is capable of holding 400 lbs.
This 5 gallon plastic Gas Can from In The Ditch is a self-venting can that has a spill proof spout that will help to eliminate spillage. The spout automatically shuts off when the fuel tank reaches empty. Each gas can also contain a gas tank spout extension. This can is made from Red plastic and it is C.A.R.B. Compliant. This tank fits perfectly onto
These In The Ditch Toolbox Dividers are the perfect way to organize your underbody box. They are made in several different lengths and come with pre-drilled holes so installation is a snap! Take the time to divide your box so things stay where they belong and not in one frustrating pile. Toolbox Dividers come in five different lengths so we will have one for your box. Get organized today!
This all new GoJak Mount from In The Ditch is for those who want to mount a GoJak to a flat surface. This mount is made from aluminum and will hold the 5,000 and 6,000 series GoJaks. Shop for your
This Aluminum Storage Rack from In The Ditch is perfect for organizing your truck, shop, garage, or trailer. They are ideal for holding shackles, or they make a great holder for brooms, shovels and rakes. This rack is lightweight and comes pre-drilled for easy installation. Each hook is 6-1/2? long and has an individual load rating of 30 lbs. Need something to hang on your new storage rack? Shop our selection of
This Floor Jack Tray from In The Ditch is a perfect solution for storing a Floor Jack on the deck of a wrecker or inside a Tunnel Box. This Tray has a 13" x 26" tray for the jack and a 3" x 26" Tray for the jack handle incorporated into one mount.
This Universal Spring Tube Mount Cable Tie-Back from In The Ditch is a great way to attach the hook on a winch line when not in use . Each universal spring tube comes with a bolt on mounting tab and one weld on mounting tab. It?s your choice to weld the tab on or bolt it on. With different mounting options this is a truly universal mount that will fit hundreds of applications. Stop using bungee cords to keep your winch lines tight and buy a set of these universal spring tubes.
These Storage Fenders from In The Ditch provide great looks, aerodynamics, and secure storage all in one package. They were designed for those who want to keep their trash cans, fuel cans, tire chains, and tools out of site and secure from theft. We off these Storage Fenders in four different lengths: 42.75", 34.75", 24.25", and 16.75". Each storage fender is made from 1/8" thick aluminum and is designed to hold up to year of abuse. They are pre-drilled with mounting holes that align perfectly with the pre-drilled holes in the Pro Series Toolboxes. Installation is really easy, just remove the plastic plugs in the pre-drilled holes and bolt the Storage Fender to the tool box using the included bolt kit, it's that simple! We recommend that these Storage Fenders be mounted using the ITD-1580 20.5" Quick Mount.
This Bungee Cord Holder is the easiest way to carry and store your bungees. Put 9?, 15? and 21? bungees on the holder and carry it in one hand. When you are done just hang the mount with bungees on the included mounting plate. Don?t forget to buy your bungee cords,
Keep your tool box organized with this Lug Wrench Bracket from In The Ditch. This pre-drilled mount easily bolts to the inside of your tunnel box and allows operators to reach lug wrenches quickly. This handy bracket holds 2 standard size lug wrenches. Shop our selection of
Drivers around the world wanted a way to crib a vehicle off the ground while repositioning frame forks or while securing the front axle in an under-reach. These Aluminum Tire Stands from In The Ditch are the answer. Each stand has an individual rating of 10,000 lbs. or 20,000 lbs. as a pair. These tire stands can be counted on as they have met the stringent ASME PALD-2009 Testing Standards.